Re: [Elecraft] My sub Receiver is DEAF lately; what could be the problem?

2012-01-24 Thread NH7RO
I'm been in touch with Elecraft and it sounds like it may be a PIN diode in the KIO3 board might have gotten overloaded. I opened up the case and checked and tweaked the TMP connections and so far I'm not sure whether or not that made a difference---the bands are pretty quiet now so I don't have a

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread Matt Murphy
I have noticed that pskreporter.info often spots me on the wrong band as well. I think there must be some glitch in the software. I've never been spotted on the wrong band by the cw skimmer network (that I'm aware of). -Matt NQ6N On Tue, Jan 24, 2012 at 8:49 PM, Gary K9GS wrote: > I've seen t

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread Gary K9GS
I've seen this happen before and it has also happened to me. Once I was on the low end of 40M and the W3LPL skimmer spotted me just below 7100. go figure. If you watch skimmer spots you'll often notice weird things showing up. One of the JA skimmers regularly spots T2DE on 40M. There is

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread Mike WA8BXN
A comment on the standby receiver ... Its a good idea but like any piece of test equipment its important to know its capabilities. If you don't hear any spurs on it you are probably ok. On the other hand, if you do hear spurs, don't get too excited. Local receivers will often hear things that won't

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread Ron D'Eau Claire
Yes. Experienced Hams know two things about bad reports: 1) Never EVER accept one station's report. All too often it's cockpit trouble at the other end or a bad rx. That doesn't mean not to be polite. But politely accept the report and go on to 2) 2) Check the report on your standby receiver. No

[Elecraft] Yuma AZ Hamfest Feb 17 and 18 2012

2012-01-24 Thread Lisa Jones - Elecraft Sales
Elecraft will be attending the Yuma Hamfest in February. If anyone is going and would like to help out at the Elecraft booth, I could really use some help. Eric is going to try to come down, but depending upon the weather, he may or may not make it. Consequently, I could use some back up on th

Re: [Elecraft] Boom & Mike for K3

2012-01-24 Thread Johnny
Agreed, I am using a us$ 30 computer boom mic and sold the PR780 for some time. No regret at all, 73 Johnny Sent from my iPhone 4 Mike Fatchett W0MU 於 2012年1月25日 上午9:10 寫道: > The Yamaha CM500's work great with the K3. They require a bit of > equalization but that is simple to do. Heil head

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread John/K8AZT
Thank you Tom, Geof, and Eduardo for responding. I feel a bit better that I am not alone experiencing this situation, however want to prove it is not from my rig. I started wondering since the skimmer rx's are sdr's, this might have something to do with digital sampling aliasing. If the AD

Re: [Elecraft] Boom & Mike for K3

2012-01-24 Thread Mike Fatchett W0MU
The Yamaha CM500's work great with the K3. They require a bit of equalization but that is simple to do. Heil headsets lately have been cheap Chinese imports that break. I like their elements or their elements like my voice but not at what he charges. Costco was selling some nice noise cancel

Re: [Elecraft] Boom & Mike for K3

2012-01-24 Thread David Gilbert
I don't know why anyone would spend that kind of money for Heil gear when there are better, cheaper, and more reliable alternatives. Buy a decent quality microphone boom (check out your local musician supply store) and almost ANY decent quality electret computer microphone. A $15 computer

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread Rich - K1HTV
Ken, I hear that some wise guys are sending the calls of DX stations, "CQ callsign" or "de callsign", on oddball frequencies so they will show up as skimmer spots. That might explain some of the bogus spots being posted on the DX cluster network. I have seen quite a few low band spots for Asian

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread Hanford R Wright
To everyone on the list that responded to my newbe question thank you... ;-) Best 73's HANFORD R. WRIGHT WA4LZC CRA # 1515 CCA# AC11-12590 -Original Message- From: Roger D Johnson [mailto:n...@roadrunner.com] Sent: Tuesday, January 24, 2012 13:48 To: Hanford R Wright Subject: Re: [E

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread W6NEK
Go to these websites. Everything you want to know about CWSkimmer & reverse beacons: http://www.dxatlas.com/CwSkimmer/ http://www.dxatlas.com/CwSkimmer/Files/Skimmerintro.pdf http://www.reversebeacon.net/ Frank - W6NEK - Original Message - From: "Hanford R Wright" To: "'Ken G Kopp'"

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread Hanford R Wright
Hi to the list Even though I am an extra I am still a newbe in HF could someone please explain what a skimmer is and its function? Thanks in Advance. Best 73's HANFORD R. WRIGHT WA4LZC CRA # 1515 CCA# AC11-12590 -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraf

Re: [Elecraft] Boom & Mike for K3

2012-01-24 Thread Jim Brown
On 1/24/2012 9:02 AM, Arie Kleingeld PA3A wrote: > The K3 will work fine with high-end > headsets AND with cheap computer headsets. It's more or less a matter of > taste. YES! You will find many here who are quite pleased with the Yamaha CM500, a boom mic headset designed for and marketed to co

Re: [Elecraft] Boom & Mike for K3

2012-01-24 Thread Dennis Moore
I got the CM500 from B&H for $44.99 free shipping, delivered last week. Don't know why other places charge 60-70. Anyway, net operator gave me good audio report and told me I sounded the same on both the CM500 and my Heil PR20 desk mike. http://www.bhphotovideo.com/c/search?Ntt=cm500&N=0&Initia

Re: [Elecraft] Boom & Mike for K3

2012-01-24 Thread Mike
Save a few bux, gain a little comfort too. Look at the Yamaha CM500 headset. I have both a Heil and a CM500. 73, Mike NF4L On 1/24/2012 10:47 AM, va3...@gmail.com wrote: > But I would like the info on the head set as well. > Elecraft sells a Heil headset for the K3 I believe (doing this from my

Re: [Elecraft] Boom & Mike for K3

2012-01-24 Thread Arie Kleingeld PA3A
James, The K3 can handle any mic or boommic. What you are gonna use is a choice you'll have to make by yourself. The K3 will work fine with high-end headsets AND with cheap computer headsets. It's more or less a matter of taste. Personally I use a Heil-pro with HC-4 element. Used this with the

[Elecraft] K3 spurious radiation?

2012-01-24 Thread Ken G Kopp
There are -many- bogus spots showing up on the DX Summit site, and most seem to originate from "skimmers" running amuck. W3LPL's seems to be among the largest error generators. 73! Ken - K0PP __ Elecraft mailing list Home: http://mailma

Re: [Elecraft] Boom & Mike for K3

2012-01-24 Thread Jack Berry
From: James Meade To: elecraft@mailman.qth.net Sent: Tue, January 24, 2012 9:41:37 AM Subject: [Elecraft] Boom & Mike for K3 Sorry if this has been addressed before. I'm hoping to spend more time in my shack and I'd like some opinions or advice on a go

Re: [Elecraft] P3 and CW signal not aligned perfectly

2012-01-24 Thread N0SA
That was it, I just needed to do the calibration. I have had the P3 for quite awhile now and just don't remember ever calibrating it or it being off in the first place. Thanks again for the help. Larry N0SA -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-and-CW-signal-no

Re: [Elecraft] P3 and CW signal not aligned perfectly

2012-01-24 Thread Craig Smith
Perhaps coincidentally, yesterday my P3 was also off by 30 Hz based on the carrier frequency of BCB stations. It had been dead-on since I calibrated it over a year ago. Haven't had time to explore further, but will recalibrate if this persists. 73 Craig AC0DS Craig Smith 1009 Alder Way

Re: [Elecraft] Boom & Mike for K3

2012-01-24 Thread va3bxg
But I would like the info on the head set as well. Elecraft sells a Heil headset for the K3 I believe (doing this from my BB) So can we use that one, or is the Pro version 'better'. If so which connector will we need for the KX3 as I would have to buy them at a retail. Thks a 'kosher' ham Sent

[Elecraft] Boom & Mike for K3

2012-01-24 Thread James Meade
Sorry if this has been addressed before. I'm hoping to spend more time in my shack and I'd like some opinions or advice on a good quality boom and mike for the K3. I suppose I'd spend $300-$500 if I had to although that is on the top end. The use would be for operating on scheduled, cont

Re: [Elecraft] P3 and CW signal not aligned perfectly

2012-01-24 Thread nr4c
On the P3 there is a menu function to calibrate the frequency. Do this and you can set it perfectly. ...bc On Tue, 24 Jan 2012 07:07:52 -0800 (PST), N0SA wrote: > I have a K3 with the P3 panadapter. > When I properly tune a CW signal in and us the SPOT and CW indicator > I > notice that it is

Re: [Elecraft] P3 and CW signal not aligned perfectly

2012-01-24 Thread Bruce Beford
Have you properly performed the P3 Frequency Calibration per the manual procedure? 73, Bruce, N1RX > When I properly tune a CW signal in and us the SPOT and CW indicator I > notice that it is not centered in the P3 display. If I center it then it > is off by about 30 Hz. __

[Elecraft] KPA 500 and Autotuner

2012-01-24 Thread Mark Michel
I was presently surprised my Tennadyne T-14 log periodic accepted the KPA 500 with ease from 10.1 thru 28.8 MhZ with the K3 without a tuner. 73. Mark W9OP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft He

[Elecraft] P3 and CW signal not aligned perfectly

2012-01-24 Thread N0SA
I have a K3 with the P3 panadapter. When I properly tune a CW signal in and us the SPOT and CW indicator I notice that it is not centered in the P3 display. If I center it then it is off by about 30 Hz. It shows the same offset if I change filters and go to REV CW. My SHIFT is centered. Is this no

Re: [Elecraft] AGC and SSB - Low signals after Xmit

2012-01-24 Thread Guy Olinger K2AV
I always have my slow AGC set to 40, and I use it almost exclusively in contests. Particularly I use it to hold the higher level of the loudest station calling in a pileup on the monotonic muddle that is lemmings all calling exactly on a spot frequency. But I just need it to hang about a word spa

Re: [Elecraft] KX1 PA Transistor Availability?

2012-01-24 Thread Tom Crites
Can anyone comment on a BD139-16 as a replacement for the 2SC5739? Thnx, -TAC On Fri, Jan 20, 2012 at 1:15 PM, Tom Crites wrote: > Does anyone have a readily available cross from Mouser or Digikey for > the KX1 PA transistor (2sc5739 plastic, 2SC2166 metal)? > > Thanks, > > -TAC ___

[Elecraft] Please excuse the OT question...

2012-01-24 Thread John Saxon
I preface my question with an apology for the bandwidth. A friend is looking for a wide frequency coverage receiver...LF to 2/3 GHz. If anyone can point me toward such products please let me know at: johnbsa...@yahoo.com Thanks, John K5ENQ

[Elecraft] FS:K2/10 CW Mint

2012-01-24 Thread Pete Meier
K2/10 with Noise Blanker and Audio Filter/Real Time Clock options installed. Mint - Zero hours after initial testing, alignment and checkout. Please email if interested. Pete WK8S __ Elecraft mailing list Home: http://mailman.qth.net/m

Re: [Elecraft] AGC and SSB - Low signals after Xmit

2012-01-24 Thread Tommy Alderman
Thanks for the correction Bill! No, it was my fingers not doing what my brain cell was telling them to do. CORRECTION: "Setting mine to 35 during contest seemed to remove the recovery delay." 73, Tom - W4BQF -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-

Re: [Elecraft] K3 spurious radiation?

2012-01-24 Thread Thomas Horsten
Hi John, I had this happen to me a few days ago where I was calling CQ on 7.015 and was spotted on 14.0614 by Tim KQ8M's skimmer. I emailed KQ8M to ask him if there was a problem with his skimmer. He replied that he wouldn't rule out that the problem was in his Rx setup, but it was tuned to 20m.

[Elecraft] K3 spurious radiation?

2012-01-24 Thread John/K8AZT
I have not been monitoring this mail list much recently so I apologize if this subject has been discussed previously. I like to monitor the reversebeacon.net website while calling cq or just monitoring looking for a qso. Recently I have discovered a situation which has me puzzled and I am hopi

Re: [Elecraft] What autotuner to use with KPA500?

2012-01-24 Thread Phil & Debbie Salas
I've been using a MFJ-998 for about four years - first with an ALS600 and now with the KPA500. The MFJ-998 works very well. It has an amp-disable feature that opens the amp-key line when SWR goes above a pre-set level, or when the tuner starts tuning. I modified my MFJ-998 so that it disables