Dave (and a couple others commented similarly) This is probably why I
suggested two options 1. dumb so not 'integration' so the dial you will
have to do the math... and 2. then when the software catches up (a few
other things appear to be missing still like SSB DVR) perhaps can have a
display t
On 1/24/2013 8:40 PM, Jay wrote:
I assume from the schematics for 240V operation, the KPA500 is wired across the
two 120V legs to create the 240V
Right.
(with no return line).
The other side of 240 V IS the return line. Neutral is NOT used for
240V equipment. Neutral WOULD be necessary i
I assume from the schematics for 240V operation, the KPA500 is wired across the
two 120V legs to create the 240V (with no return line). I understand the
safety wire is another lead.
__
Elecraft mailing list
Home: http://mailman.qth.ne
That would be good to have by mode & band.
John Hendricks K7JLT
On Jan 24, 2013, at 18:28, Wayne Burdick wrote:
> I'll think about making it per-mode.
>
> 73,
> Wayne
> N6KR
>
> On Jan 24, 2013, at 6:10 PM, John_N1JM wrote:
>
>> Using SSB, in this mode PLS makes the AGC seem very fast and i
I've been using a Station Master since soon after they were introduced
and I highly recommend it. It will do all kinds of switching jobs,
primarily for controlling antennas, but I think it also will control
your Quadra from a dedicated PA control port. I know it can control the
SteppIR by commu
I'll think about making it per-mode.
73,
Wayne
N6KR
On Jan 24, 2013, at 6:10 PM, John_N1JM wrote:
Using SSB, in this mode PLS makes the AGC seem very fast and is very
annoying
particularly when band noise and static is high. Is this normal?
Things
sound great with it off.
73, John N1JM
Using SSB, in this mode PLS makes the AGC seem very fast and is very annoying
particularly when band noise and static is high. Is this normal? Things
sound great with it off.
73, John N1JM
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-AGC-PLS-tp7569110.html
Sent fro
I am wondering if the MicroHam station master or station master deluxe would
work. Any thoughts?
Thanks,
Keith
AK6ZZ
Sent from my iPhone please excuse typos
On Jan 24, 2013, at 6:11 AM, "Keith Heimbold" wrote:
> My shack is getting increasingly complex and with my K3 I plan to once again
>
I thought the following observations may be of help to anyone having
difficulty achieving the KPA 100 resistance measurements on page 44 of Rev H
of the KPA 100 manual.
I initially performed the checks using a DMM with the PCB illuminated by a
40 Watt bench light a few inches away. Resistance va
Sri if it's obvious, but is XIT or RIT enabled?
73, Ron AC7AC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Martin
Sent: Thursday, January 24, 2013 1:11 PM
To: elecraft
Subject: [Elecraft] [K3] Ref Cal failed
Elecrafters
Elecrafters,
a fellow ham kept telling me i am off frequency, so i performed the CAL
REF Method2 per the instruction manual.
A 10m ssb qso with him showed that i now am within a few hz to his rx.
I then had a qso on 80m with a few SDR-guys. They told me i'm off about
100hz. I trust them. I don'
Thanks to all who contributed. Good suggestions.
I went to the website below, and it looks promising. There is a mention of
Vista and Windows7 administrator problems but there is a work-around. I will
try this later.
In the meantime, I played with right clicking the QuickMix icon and click
Larry,
Is this antenna different from other bands or has it band specific
components?
It sounds like a set of dirty relay contacts or a bad joint. I've had
this on a few antenna switches. The xmit voltage is enough to punch
through but microvolts aren't.
73 de Brian/K3KO
On 1/24/2013 16:
Feb. QST, pp. 33-36, "A Remotely Band Switched Tower Shunt Feed for 160 and 80
Meters," Steve WB6RSE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecr
It would make the maths even easier if one could set XVn IF to 10MHz (and
XVn RF to 0MHz), one could then use the K3 external 10MHz reference as the
Transverter Local oscillator
Last time I checked Wayne was working on the software to give the KX3 the
same xverter driving capabilities that the K3
Perhaps your problem is external to the K3. Are there any
normally-open relays between the K3 and the antenna?
I had this same issue happen to me several times in a December
contest. I suspected the problem may have been a dry circuit
issue in the AL-1500 T/R relay. Since then, there have
I understand this sound card control utility works on Windows 7. I have not
tried it.
http://www.romacsoftware.com/SoundManagement.htm
73, Bob, N7ZO
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Roger de Valle
Sent: W
Good morning everyone from snowy, frigid Michigan...
I have K3 SN# 52XX and the receive seems to come and go on 30 mts - that's
where I notice it the most but it happens on other bands too.
My AGC settings are:
AGC DLY - NORM
AGC HLD - 0
AGC PLS - NORM
AGC SLP - 4
AGC THR
Wayne,
Great on the new NR adjustability - feature!
Please keep the NB on your list as well
As others have posted - it works great and is indesipensible for mobile
operation..
But - it also significantly degrades the opposite sideband rejection on CW
Can anyhting be done about that I wonde
Thanks also noted.
72
Dom
M1KTA
On 24/01/13 15:16, Don Wilhelm wrote:
Dom,
Note that there is also a XVn OFS menu entry that will allow you to
enter an offset to compensate for variations in the transverter LO and
give you the correct frequency reading in the lower order digits too.
73,
D
Dom,
Note that there is also a XVn OFS menu entry that will allow you to
enter an offset to compensate for variations in the transverter LO and
give you the correct frequency reading in the lower order digits too.
73,
Don W3FPR
On 1/24/2013 9:08 AM, Dominic Baines wrote:
Thanks Don,
Yes ag
My shack is getting increasingly complex and with my K3 I plan to once again
attempt to get the remoterig working once and for all. At the moment I have the
MicroHam microkeyer 2 integrated with my Steppir three element antenna
interfacing with my K3. It is a nice setup.
The ACC plug is shared
Thanks Don,
Yes agreed I just advised was looking at two options.
I had already been sent an email asking was this limited to KX3 only?
The answer would be no hence the "dumb" option.
UK has 472KHz-479KHz available to full licencees with a Notice of
variation to the licence.
The option
The transverters may be "dumb", but the KX3 and the K3 both have the
"smarts" to display the output frequency - anywhere between 0 and 24999
MHz. Just use the XVn RF menu to set the low end of the transverter
output band.
73,
Don W3FPR
On 1/24/2013 8:30 AM, Tim Hague wrote:
Hi Dom, I suppos
Hi Dom, I suppose being an 'old boy' I've been used to transverters that are
dumb, I just learnt to ignore the MHz read outs and substituted the correct
figures in my head!. I have the K3 as well as the KX3 and have just fitted the
transverter output option which gives me 1mW to drive a box.
B
Tim,
I see two main options...
1. Transverter is 'dumb' and is just there attached to the KX3 and no
controls (other than basic T/R) come from KX3 to Transverter and you
live with a display that is 'offset' by the IF.
or
2. Transverter works with the KX3 menus for Transverters (see the XV
Hello folks
My KRX3's carrier operated relay is rattling when I have an RX loop connected
to its aux input when I transmit on 160/80. Too much antennas on a too small
lot. Nah, Whadda ya gonna do?
As a quick fix I used an A/B antenna switching relay to open the RX chain when
TXing. Loop on inp
Dominic please keep us updated, interesting.
Best regards, Tim Hague
Skype m0afj.Tim
Sent on my iPad
On 24 Jan 2013, at 09:52, Dominic Baines wrote:
> I have started to design and build one for those interested in the band.
>
> http://m1kta-qrp.blogspot.co.uk/2013/01/472khz-kx3-transverter.ht
I have started to design and build one for those interested in the band.
http://m1kta-qrp.blogspot.co.uk/2013/01/472khz-kx3-transverter.html
72
Dom
M1KTA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
H
29 matches
Mail list logo