I ordered the aircraftsp
What headset/mic/adapter were you using ?
Thanks for the info.ruce PTT but I want to be sure I understand...you
attached this PTT to the ACC2 port on the KX3 and youyou had a
microphone/headset pluged into where exactly, mic in mic, headset in Phones
or what ?
Like others I
Have a look at the new (August) QST on a Bluetooth headset a homebrew, very
nice one.
73,
Fred/N0AZZ
K3 Ser # 6730--KX3 # 2573--K2/100 # 6470-KAT100
P3/SVGA--KPA500--KAT500--W2
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
The cheapest option (that works) is a PC headset from logitech.
I have used mine without issue since day one.
http://m1kta-qrp.blogspot.co.uk/2012/10/kx3-headset.html
72
Dom
M1KTA
On 12/07/13 10:20, Fred Smith wrote:
Have a look at the new (August) QST on a Bluetooth headset a homebrew, ver
I know that the 17m is but is 12m available?
RC kc5wa
--
On the 8th day. God created Amateur Radio and Baseball.
NAQCC #0420
SKCC #089
FP #567
4SQRP #169
Wiol ono
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/el
RC,
12 (and 10) meters are not available from Elecraft. I have heard of a
couple builders who attempted a 10 meter K1 mod, but I don't know the
details nor the results.
One difficult part is obtaining the crystal required - it must be a
fundamental mode crystal and must be 8 MHz above the low
Hows the KPA-500 holding up under contest conditions for SSB and CW?
I've read the reviews on eham but there was only one that referenced
performance in contest conditions (and it was favorable).
I'm curious if the temp stays down and if power is lost as it heats up?
Thanks
Rich - N5ZC
We used several KPA-500 amplifiers on the Swains Island NH8S DXpedition and
they performed flawlessly under 24/7 use for 9 days straight in hot and
humid tent conditions.
-Original Message-
From: Richard Thorne
To: Elecraft Reflector
Date: Fri, 12 Jul 2013 08:48:52 -0500
Subject: [Elec
I know this is OT but there are so many knowledgable people on this reflector
that I can't pass it up.
A friend has a Yagi antenna (HF tri-bander) that he wants to measure the SWR
before he raises the antenna up on the tower.
Question: is this accurate or does the proximity of ground (maybe two
On Fri, 12 Jul 2013 08:48:52 -0500, Richard Thorne wrote:
> Hows the KPA-500 holding up under contest conditions for SSB and CW?
>
> I've read the reviews on eham but there was only one that referenced
> performance in contest conditions (and it was favorable).
>
> I'm curious if the temp stays
Two feet high.. is way too close to the ground.
However, if the beam is 10 foot high.. or maybe 15... that would be so much
better and more accurate..
Expect some change when it gets top of tower.. but at 15 ft.. adjustments can
me made reliable, with little change
seen.
Good Luck, be carefu
On Fri, 12 Jul 2013 07:50:43 -0700, Phil Hystad wrote:
> Question: is this accurate or does the proximity of ground (maybe two feet
> high)
> so strongly affect the SWR reading that the measurement is not accurate.
Not accurate at all. Most manufacturers say to stand the beam up so it
is point
What I have done is clamp it to my wooden deck railings on a 8 foot mast,
the higher your deck is the better.
That worked pretty well for me, little change once it was up in position.
73 good luck
Emory WM3M
-Original Message-
From: AG0N-3055
Sent: Friday, July 12, 2013 10:58 AM
To: e
You might get a somewhat more representative SWR value if the yagi is
vertically mounted so that the reflector is closest to ground and the
director at the top.
The idea is that the reflector will partially decouple the close in
ground surface from the antenna. I've done this with VHF and UHF
We use the KPA500 and KAT500 combination at our VE2DXY contesting station
in zone 2 for CQWW SSB contest. The combination makes an excellent
contesting setup. I have also used in other CW, SSB & RTTY contests and
very impressed with The performance. I really like its ability to rapidly
change bands
Thanks guys who answered the question -- good convergence. I had already
told my friend that his readings would not be very accurate but he is concerned
about putting an old beam antenna up that had been out of service and laying
out on the ground in the open for some time (years?).
I think I hav
I used a 12 foot tall four leg scissor ladder. Close but no cigars. The lower
bands will probably show the higher SWR, and a lower shift in freq response.
As long as the pass band is close it will probably be OK.
Mel, K6KBE
From: WM3M
To: mcduf...@garymc
The lower the frequency the harder it is and I found standing the antenna up
on end didn't work well either.
What I do especially at the lower bands is put the antenna up in the air
around 10 to 12 feet and adjust it to just below the bottom of the band.
For example for 40M I would tune for best
Hey, Rich:
I've used mine from several places on SSB, CW and RTTY. Flawless
performance! Used a THP HK-1.1fx before
the Elecraft.not flawless!!
73,
Steve AA4V
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Hi K2 builders;
I just have finished with the build of my K2 CW/SSB base 10W vesion.
Before I will continue with the build-in my KPA100 unit I will do a whole K2
transmitter final allignement.
I already have done a receiver allignement so the band coils should be quit in
the naber for maximum po
John, did anyone reply to your questions? Have you made a decision? I am also
wondering if making making the switch will compromise 6M performance.
73,
Lou, W0FK
KH7T wrote
> I have the PR6 mounted on the K3. Did successful JT65 6M moon bounce
> with 11 element antenna,1000 watts, 110 foot Bu
On 7/12/2013 6:48 AM, Richard Thorne wrote:
Hows the KPA-500 holding up under contest conditions for SSB and CW?
It works VERY well. Long before I bought my KPA500, I beta tested it
during a RTTY contest. My instructions were to "run it with all the
lights lit." It produced full power for th
Not a problem here in the 10 months I have owned it. Temp
never gets above 60 degrees, fans never go into highest
speed. If the SWR is high, it takes care of itself and lets
you know about it with a beep in the headset and some text
on the K3 display screen. The difference in operating Low
Power (
On 7/12/2013 9:12 AM, John Santillo wrote:
What I do especially at the lower bands is put the antenna up in the air
around 10 to 12 feet and adjust it to just below the bottom of the band.
For example for 40M I would tune for best VSWR at 6.95MHz. Then when the
antenna was raised the resonant po
I ran into this issue with my Mosley Super 33 where it looked fine on 40m at
12' at 7.14 mhz resonance and then when I put it up in the tower it shifted up
100 kHz. Not good.
I have been able to improve resonance slightly by extending the tower all the
way up to 50' but eventually I will need
Don, still no sidetone or ability to change XFIL ! I have done the
following:
1) I checked C72 and RP3 solder joints carefully (with a magnifier), and
although they looked fine, I reheated them briefly.
2) I checked the solder joints on U2 two ways: I reheated the joints
carefully. I also c
Jean,
The K2 measures the RF output and sends the resulting DC voltage to the
MCU. If no power is detected, the K2 will increase drive in an attempt
to bring the power up to that requested by the power knob. In fact, the
power will go to maximum and produce Hi Cur messages.
You probably hav
I regularly use my KPA500 for meteor scatter on 6m at 550w out, 30 sec on, 30
sec off, for hours in FSK441 mode. CW or SSB is a cakewalk compared to that.
Temps run about 65 deg C,. I set the fan at 4, though I don't think it makes
much difference. The factory fan algorithm is well-thought
For all practical purposes, the differences between the PR6 and PR6-10
PR6 NF= 0.5 dB typ, gain= 18 dB
PR6-10 NF< 0.7 dB, gain= 20 dB
should be indistinguishable. In the worst conditions of in-band QRM
the PR6-10 may result in up to 4 dB poorer IMD3 but both interfering
signals woul
On 13-07-10 10:42 PM, Don Wilhelm wrote:
There is one possibility that your 51 ohm load (measured at DC) is not a
good 51 ohm pure resistance at the frequency you were measuring. Borrow an
antenna analyzer and test your load at the frequency of operation.
I seem to have thrown people off by in
Kevin,
Your logic is flawless as long as everything in the KAT2 is working
properly. Yours apparently has some ills.
For instance, if one of the relays is not working, that could leave an
inductor or capacitor in the circuit at all times, or if you have a bad
connection somewhere in the KAT2,
David,
I know you changed the DAC which was the most logical failure point
based on your problem description.
Yes, it is possible that the TONE/XIL signal is now stuck at a low level
instead of high (or vice-versa) which would select a wide filter.
Since resetting the MCU did not help, my nex
David wrote:
> ...still no sidetone or ability to change XFIL !
Does the LCD show FL1, FL2, FL3, FL1, etc. as you press and hold the
XFIL pushbutton (without any actual effect)? (You may already have
supplied this info, but I didn't see it.)
If the LCD shows the expected FL1/2/3 change, do you
Don and Mike,
1) the LCD does indeed show FL1, FL2, FL3 in sequence as the XFIL button
is held down in sequence.
2) I could not see a significant change in voltage on FP U2 pin 1 (OUTA)
as the XFIL is held. It was not very stable, but fluctuated from 0.18 to
0.22, regardless of the filter widt
For about a year I have been using my K2 in digital modes. For about the
first six months I used JT65 and then switched to JT9. For North America
I usually use 10 watts and for the rest of the world I use 20 watts. In
both modes the transmitter is on continuously for one minute followed by
a
34 matches
Mail list logo