Re: [Elecraft] K3 Filter Settings Main and Sub Receiver Track For Data Mode Only

I have a K3. Did not have the problem in 5.33. Do not have the problem in 5.38. I am unable to duplicate your problem. In Data A, and b SEt width control varies width in sub RX while main RX stays the same. Your report sounds like you are in diversity mode. My frequency shows as 1.814.9 The right

Re: [Elecraft] K3 Filter Settings Main and Sub Receiver Track For Data Mode Only

Hi Elliott, Here's a long-shot. Take a look at your filter selection for your SUB RX using the K3 Utility program. Maybe you only have one filter enabled for DATA mode. 73, Mike K2MK Elliott Lawrence-5 wrote > Changing to MCU 5.38 did not solve the problem. Need to contact K3 > support! > 73 >

Re: [Elecraft] K3 Filter Settings Main and Sub Receiver Track For Data Mode Only

Changing to MCU 5.38 did not solve the problem. Need to contact K3 support! 73 Elliott WA6TLA On Oct 23, 2015, at 10:57 AM, Elliott Lawrence wrote: > Using the latest K3 firmware MCU 5.35 for my K3 (not K3S). In the Data mode > only, setting the bandwidth of the main receiver also causes the s

Re: [Elecraft] possible hurricane - based noise?

Hi, Nothing unusual heard or seen at the bottom of the 20m CW band here in CNY. AB2TC - Knut Phil Anderson wrote > Hey All, > > If you have a Panadapter attached to your K3, take a look at the bottom > portion of the 20-meter CW band. It kinda looks like a CW contest spread > but it is all noi

Re: [Elecraft] K3 Filter Settings Main and Sub Receiver Track For Data Mode Only

Hi Elliott, I tested MCU 5.33 and could not duplicate your problem. I noticed that the latest production release firmware is 5.38. I loaded 5.38 and again tested and still could not duplicate your problem. So maybe the problem was only present with MCU 5.35. Another possibility is that you accide

[Elecraft] possible hurricane - based noise?

Hey All, If you have a Panadapter attached to your K3, take a look at the bottom portion of the 20-meter CW band. It kinda looks like a CW contest spread but it is all noise spikes. Wondering if that cat 5 hurricane about to hit Mexico is the cause? It was not there when I worked W9ZN in Chica

[Elecraft] K3 Filter Settings Main and Sub Receiver Track For Data Mode Only

Using the latest K3 firmware MCU 5.35 for my K3 (not K3S). In the Data mode only, setting the bandwidth of the main receiver also causes the subreceiver bandwidth to track and be identical. The BSET control XFIL for Data has no effect. In CW and SSB modes the main receiver XFIL can be adjusted

Re: [Elecraft] P3 not communication through RS232 cable

Make sure the RJ45 connector is snapped into the RS232/P3 RJ45 socket. You should hear a distinctive snap when it is inserted properly. cheers, Fred KE7X Author of: “The Elecraft K3S and P3 – Getting the Most out from Your High Performance Station”. "The Elecraft K3: Design, Configuration and O

Re: [Elecraft] JT65 audio noise

The DSP code in the K3 and K3S limits the audio bandwidth to about 4.2 kHz, and that won't be changing in any significant way. 73, Lyle KK7P 2. Is there any way to increase my filter bandwidth to be wider than 4K? Shouldn't I be able to get 6K with the AM filter?

[Elecraft] P3 not communication through RS232 cable

My Pc has the svga installed when I put the kit together but I do not have a monitor installed for svga yet. I originally was able to download the firmware using the usb a/b cable and my computer. The usb a/b cable is now connected to the K3s usb port and using the lp-bridge for rig control/ lo

Re: [Elecraft] JT65 audio noise

Do you have "Flatten" checked in the Wide Graph window? If so, try unchecking it. 73, Tim - N3XX On 10/23/2015 7:15 AM, Peter Pauly wrote: 1. On my K3S I'm getting audio noise over the USB connection in the upper part of every band as shown on the WSJT-X JT65 graph. The WARC bands seem to be

Re: [Elecraft] Corrected QST review of KSYN3A is on line.

Elecraft tweeted this link this morning: http://www.elecraft.com/K3/QST%20KSYN3A%20revised.pdf On Fri, Oct 23, 2015 at 3:15 AM, Ken Chandler wrote: > I asked Wayne exactly that! > He say he would post it on the web site, once confirmed! > > Ken.. G0ORH > > Sent from my iPad > > > > On 22 Oct 20

Re: [Elecraft] When is mode A not mode A?

I suggested this when the K3 was introduced. I had just started using the Winkey USB with my K2/100 and loved it. I still use it. It has Bug, Ultimatic, Curtis A and B emulation. Maybe they'd save a little DSP code space by offloading CW generation to the K1EL product. There is a reason why a

[Elecraft] JT65 audio noise

1. On my K3S I'm getting audio noise over the USB connection in the upper part of every band as shown on the WSJT-X JT65 graph. The WARC bands seem to be shifted. I am using the 6K AM filter. Any idea what is causing this? This has to be affecting the ability to decode weak signals. The noise is p

[Elecraft] K3s and TrueTTY

Is there anyone using K3s and the best RTTY program TrueTTY? John OH3SR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This li

Re: [Elecraft] When is mode A not mode A?

Hi Ken I like your idea too, would be fab having the K1EL chip in the Elecraft K3. Ken.. G0ORH Sent from my iPad > On 23 Oct 2015, at 03:10, Ken Alexander wrote: > > Maybe Wayne and Eric should talk to K1EL about licensing (or whatever it is > one has to do) so they can use his famous $8.00

Re: [Elecraft] Corrected QST review of KSYN3A is on line.

I asked Wayne exactly that! He say he would post it on the web site, once confirmed! Ken.. G0ORH Sent from my iPad > On 22 Oct 2015, at 22:32, Gary wrote: > > That would be nice for those few Hams who do not live in the US and derive > little from belong to the ARRL, who are respected every