It was indeed the PTT-KEY setting. I've always had it OFF-OFF.
Apparently during or after our move to NV, probably while setting up the
gear in the new "shack", it got changed to DTR-OFF [obviously by me, who
else?]. There are no radio programs or loggers running on the computer
but it is an
Guessing a lot of us first licensed in 1950's learned code from one
of these. Instruct-O-Graph sounds familiar. My ham license
instructor (elmer) used one in night-time class a nearby HS (Caro,
MI). He was music teacher for his day job. Must have trusted me as
he let me take it home after c
Hi Bob,
The first thing I would try is to perform a parameter reset on the P3. Note
that this will erase any settings such as FN keys etc that you have
programmed, so you may want to save the configuration with P3 Utility or
write them down.
To perform the parameter reset, turn off the P3 and
For Sale: Elecraft KX3/PX3?KXPA100/AT in Nanuk Case
as a package ~ appropriately priced . For details please
contact off the list = emuprof at yahoo dot com
Cheers, Jan K1ND
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/l
Ken,
Suggest you contact Maritime Radio Historical Society
http://radiomarine.org/ Very interesting group keeping the history of
maritime cw alive
73's Jack W4GRJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
There is also a great museum in Manitoba.
http://marminc.ca/
Fred KE7X
From: Elecraft on behalf of Ron D'Eau Claire
Sent: Sunday, October 30, 2016 8:24 PM
To: 'Charlie T, K3ICH'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Paper Tape CW sender
Some mus
Hi,
The VFO B display can show a wide variety of other information in addition to
frequency by tapping DISP and rotating the VFO B knob. However, you cannot
display alternate VFO B data while data or CW text decode is active.
This shows the total ampere-hours used since the value was last rese
Dropped the antenna and found the problem. While not a complete open
connection, one leg apparently was compromised enough to make the KAT500
unhappy.
Thanks to Tom VA2FSQ and Don W3FPR for input.
73,
Bill - W0BBI
>
>
>
>
>
>
__
I have just received a new KX2 and am finding an ubstable drifting birdie on
3.68mhz, also some "microphonic" instability if you tap the pcb with a light
plastic spatula!, anyone else had these issues? Paul G4IKI
__
Elecraft mailing lis
Fred,
The cause might be the initialisation of the com port connected to the
K3 (PTT and KEY on pins of RTS and DTR, = pins 4 and 7).
73
Arie PA3A
Op 31-10-2016 om 5:15 schreef Fred Jensen:
This may not be new, I often pay no attention to the radio if I power
it up, but recently I've noticed
10 matches
Mail list logo