I think Elecraft altered their filter array recently ( maybe 1-2 years) and
maybe the order page hasn’t caught up. I believe they discontinued some and
added some 6-pole filters. I think that is what you have.
Sent from my iPhone
...nr4c. bill
> On Feb 23, 2019, at 3:36 PM, Carl Jón Denbow w
I have recently acquired an Orion II and I am looking to hook it up to my
P3.
I have got the details from VE7TK's website as regards the mods needed to
the Orion II and it looks fairly straightforward.
Before I go down that road, I wondered if anyone else is using or has used
that set up and if t
Technically, “Celsius” rather then centigrade!
We are more or less used to Deg C in Canada after about 40 years of using it.
Deg F are still sometimes used though. Older folks understand both while kids
have no idea what a yard or a pound is!
Sent from my iPad
> On Feb 23, 2019, at 17:43, Bo
Good Evening,
Winter had been mild, now that's only a memory. It has snowed every
day for two weeks. The sun was also experiencing mild weather but now
it has a hole shooting ions off into space. The stream is turning our
way due Tuesday and Wednesday of next week. After the aurora settl
Hi Mike,
Wow! I apologize for the problem.
I believe we reviewed your config file and fault log on Friday and we are
authorizing return of the RF deck at our cost and will send you prepaid UPS
shipping label on Monday. I will stay on top of this to make sure it proceeds
quickly.
I will take a
My KPA500 displays the temperature in degrees Centigrade. Just
remember, small numbers cooler, larger numbers hotter. Normal room temp
is about 23 to 25 degrees C. The fan switches on at 50, steps up at 55,
steps up at 60 and steps up at 65.as I recall. The book says
maximum temper
oops... can't type... obviously, I'm using my KPA500 and KAT500 now...
On 2/23/2019 20:13, Mike Cox wrote:
I'm avoiding it now! My KPA1500 died for the second time since it
arrived last September. I contacted service last Thursday and, per
request, sent them my configuration information. Noth
I'm avoiding it now! My KPA1500 died for the second time since it
arrived last September. I contacted service last Thursday and, per
request, sent them my configuration information. Nothing has been heard
since.
Now my "old" KPA500 and KPA500 are back in line and working fine! That
appears
Thanks, I’ll check that out also.
Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
c...@n8vz.com
www.n8vz.com
EM89wh
IRLP 4533 Echolink 116070
PSK and JT65 Forever!
===
> On Feb 23, 2019, at 6:10 PM,
I too have the 2000 watt version and I get very usable results even at QRP
power levels out of the K3S.
Jim, W0EB
> On Feb 23, 2019, at 5:18 PM, Nate Bargmann wrote:
>
> I have the 2000 Watt version and it is entirely satisfactory for me even
> when operating at 100 Watts or slightly less.
>
Never a waste when you learn and share!
> On Feb 23, 2019, at 12:46 PM, JEROME SODUS wrote:
>
> Hello,
>
> Please disregard my yesterday's email.
>
> I fired up the system today and everything works, which is a surprise since
> no changes were made.
>
> I have no explanation for this right
Steve,
The 200 watt coupler will give more resolution at lower powers.
In other words, the 2000 watt coupler covers the scale from 0 to 2000
watts, and 100 watts is only 1/20th of the way up the scale. With the
200 watt coupler, 100 watts is the halfway point.
73,
Don W3FPR
On 2/23/2019 6:0
Eric -
I know a number of KPA1500s have been returned to you with one of the
output transistors dead. Is there common source for the problem that
the rest of us can try and avoid?
regards
- Paul
At 10:13 AM 2/16/2019, you wrote:
Hi Peter,
I'm sorry to hear about this failure and deeply ap
I have the 2000 Watt version and it is entirely satisfactory for me even
when operating at 100 Watts or slightly less.
73, Nate, N0NB
--
"The optimist proclaims that we live in the best of all
possible worlds. The pessimist fears this is true."
Web: http://www.n0nb.us GPG key: D55A8819 GitH
I have noticed that also. Luckily I remember which filters are 8 pole but
the website really should specify.
N8VZ may also try contacting Inrad. Scott may answer on weekends?
John KK9A
Dave WW2R wrote
The "previous" web site used to implicitly say which filters were 5 pole and
which were 8 p
I'm contemplating adding a P3 to my K3s and the P3TXMON option seems a
worthwhile addition. I am trying to figure out which directional
coupler to select but can't find much if any information between the
DCHF-200 and DCHF-2000. So I don't have any data upon which to base
the decision. At the curre
Good advice, Mark. I’ll do that on Monday. I’m happy to see that I’m not the
only one confused by this. I really only want to use eight-pole filters in both
main and sub receivers. 73 de Carl
Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 4
I agree. My SPE 2KFA gives me the choice.
de John/K4WJ
On 2/19/2019 12:26 PM, Courtney Judd wrote:
Just a short note to let you know I am really enjoying my KPA1500
it does all that is supposed to and more. I do have one suggestion
that perhaps you could add to the menu would be ability to
The "previous" web site used to implicitly say which filters were 5 pole and
which were 8 pole on the ordering page. The new "improved?" website omits
this information. Looking to answer the same question recently I had to
resort to looking elsewhere on the web!
Dave
Ww2r
>Bill,
>Thanks for yo
Carl,
It is a six pole filter.
It sounds like you got the 200 Hz filter in lieu of a 400 Hz filter.
I think a call to Elecraft Sales is in order.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Carl Jón Denbow
Sent: Saturday, February 23, 2019 20
I have an sdr play hooked up to the xvrt out and I'm curious what the
source of the signals are when deceiving in diversity mode.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/
Bill,
Thanks for your response. This filter, unlike the others, is exposed and there
are six crystal cans. Does this mean it’s a five-pole? I was sure I ordered
an eight-pole filter? When I do a search on the KFL3C-400 everything I see
indicates it’s an eight-pole filter. Are there two ty
Is your filter in a metal can. Eight pole filters used to be in a can. Five
pole filters were exposed parts. If the later, count the crystal cans. Should
be 5, 6, or 8.
Sent from my iPhone
...nr4c. bill
> On Feb 23, 2019, at 1:44 PM, Carl-N8VZ wrote:
>
> I’m assembling a KRX3 second receive
Hello-
Purchased a KX3 in late December 2018, unfortunately ham radio isn’t for me and
I missed my return window.
For sale:
Kx3 with built in tuner and bypass filters all factory installed.
Ax-1 multiband whip antenna and bipod stand
Dx engineering power supply for the kx3.
Everything works p
> This must be something simple I am overlooking. Any ideas for what to
> check?
Did you select: MENU:MIC SEL = Line IN and set the Mic Gain
(Line In) level for four bars of ALC *AFTER* switching to AFSK A
(DATA)?
The K3/K3S Mic Gain control is overloaded (used for both mic
gain and Line In) an
I’m assembling a KRX3 second receiver for my K3. One of the filters I’m
installing is a KFL3C-400. When I ordered it, the order form said it was an
8-pole filter. I purposely only ordered 8-pole filters. It was my
understanding that 8-pole filters have no offsets to worry about. Why,
then, doe
Ed,
It would seem that N1MM+ and MMTTY are fighting for the RTTY operation.
Normal RTTY operation is on lower sideband, and that is the default of
AFSK A. If it is set to upper sideband, the ALT button will switch
sidebands for you.
Make certain that you do not have "reverse" or "invert" or
Hello,
Please disregard my yesterday's email.
I fired up the system today and everything works, which is a surprise since no
changes were made.
I have no explanation for this right now but will attempt to see if the port
was shut-off; Dave-AA6YQ cautions about that from time to time. I though
Ed,
Your basic set up is correct, DATA mode - AFSK. Do use line in/out.
However, there is no need to to switch into USB. FLDIGI will take care
of everything from here. I use VOX to turn on the transmitter vice
computer control and this just works FB. And yes, K3NDM will be in NAQP
this wee
Many thanks for your reply Peter.
The Rev C schematics are the ones on the current Elecraft website, which I
have. I was suspicious of the pins which are the originals, but they look OK
and Deoxit has not cured the problem. Yesterday my order of some ribbon cables
arrived, and I was able to
* On 2019 22 Feb 22:55 -0600, Scott wrote:
> Nate,
> Check the NR and ATT are set the same for both the Main and Sub receivers.
> Sounds like you have NR or ATT set ON for the Main and NOT the sub receiver.
> If these settings are not the same the audio will be noticeably different on
> the main an
My K3 seems to be all set up for RTTY – DATA Mode, AFSK A selected, I am using
Line in on the rear panel (selected in the MENU), I use MMTTY/N1MM, and I use a
microKeyer III. All appears well except that I need to switch the K3 into USB
mode to actually transmit RTTY. If I have the K3 set to D
Hi,
Thanks for the help on this!
I did find the problem, it was a setting where the filters for the sub RX
wasn’t turned on for the corresponding filter width of the main RX. I remember
some time ago my remote connection went crazy and the radio entered the
settings menu. I also found a could
Hello All,
I have recently acquired an early K3 which needs tidying and checking over. So
far all appears to be OK except for the KPA3 which gives no RF output but the
rig draws 14 Amps regardless of the power setting. The LPA is working fine
with up to 12 W RF out and a max current draw of 4
Yes I did check the antenna settings for SUB RX. It seems to be a problem that
appeared with an upgrade or by time. I can’t remember I did anything in
settings to create this behaviour. As I am able to get it working again by
going into filter settings and press SUB and then the RX dies when I d
One thing that I don't see mentioned is that the gain
settings for the for the crystal filters in the two
receivers may be resulting in somewhat different gains over
the signal path in the main and Sub Rcvrs. I notice some
differences between the main and sub rcvrs which varies if I
change the
36 matches
Mail list logo
