Harry:
Are these values on a dummy load or feeding the KAT500 or antenna direct?
I just quickly checked my KPA500 into a dummy load at 500 watts output.
The currents run from 14.0A on 20M to a low of 11.5A depending on
band. This is done with 500 watts output as shown on my Bird 43 and
Bir
HI,
I'm new here and new to Elecraft. I have to KPA/KAT500 combo and love it! I
do have a question about PA current though...
On all bands except 20, when running full power out, my HV sits around 64v
and PA current is stable between 10 and 12A. FAn takes it's time coming on
and amp just loafs al
Just curious on my part, with my K3S I ran FT-8 for about an hour making
1 contact after another on 20M. Power output was set to100 watts
although the external powers meters (2 different ones) show a bit more
than 100 watts. Started with PA temperature at 36°C and never saw it
go over 50°C.
That did it Don, thanks!
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
T
Wow - yeah!
Running FT8 30W my KXPA100 is psuging 55C and dropped to 35C with a 3" USB
fan placed on top of the fins. When the shack gets cold this Winter, I may
take the fan off again ;-)
Bret/N4SRN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Steve and all,
I used cqrlog for a couple years and it's impressive. For sake of
simplicity, however, I went back to the trio of xlog & xdx with hamlib
support. I made a minor modification xdx so that when I select a new
(for me) dx, I can then paste the call into xlog.
As to Elecraft soft
Re: "I believe this problem has been solved in Windows 10. I've not had a
problem with com ports changing with Windows 10 updates."This made me realize
that I have not seen com port reassignment on update on my Win 10 computers. I
have seen it in the past on my Win 7 computers. I also have m
Thanks Bob.
73,
Mark, WB9CIF
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Bob McGraw K4TAX
Sent: Friday, August 2, 2019 14:25
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Windows Update and the K3 USB Audio
F Y I - I pass along from another source.
7
F Y I - I pass along from another source.
73
Bob, K4TAX
I am beginning, rather belatedly, to understand the source of the many
users reporting low Tx audio levels with the 64-bit MS Windows version
of WSJT-X. I stated above that "Pwr" slider in WSJT-X directly controls
the Windows audio mix
* On 2019 02 Aug 08:05 -0500, Bill Frantz wrote:
> I am also interested in the answers to this question. Also, has anyone
> gotten N1MM to run under Wine?
Yes. I've documented that here:
https://www.n0nb.us/blog/2018/12/running-n1mm-logger-with-wine-on-debian-buster/
As for things like running
* On 2019 01 Aug 16:17 -0500, Steve Boles wrote:
> Thanks so much for the numerous responses. A month ago a bought a 13" Dell
> with "factory loaded" UBUNTU and have been very pleased with its
> performance. I'm very new to UBUNTU but have run Puppy in the past and
> have been very pleased with i
I believe this problem has been solved in Windows 10.
I've not had a problem with com ports changing with Windows 10 updates.
The problem has been with audio settings changing. The setting its self doesn't
change, but the audio level at that setting changes. When upgrading to version
1903 I had
As far as I know, Macs don't have this problem. Those trying to
solve it in Linux might try to understand how Apple addresses
it. With some luck, the Apple approach is in the open source
part of MacOS, making it easy to study. Windows users might
approach Microsoft saying that other OSs have so
I am also interested in the answers to this question. Also, has
anyone gotten N1MM to run under Wine?
73 Bill AE6JV
On 8/2/19 at 4:47 AM, clive.g8...@gmail.com (Clive Lorton) wrote:
Following on from the thread “Has anyone tried Ubuntu” What applications do
Linux users use with their K3 for b
Clive,
I’m experimenting with CQRlog on Ubuntu 18.04. I’m to the point of rig
control, CW via WinKeyer & general logging. My rig is KX3. The system works
well.
I’m in certain as to how much further I’ll go as my DXLABS set up on W10
functions very well. Also, I’ve not found a good contest
HI,
Amongst my old PCs I have one (AMD A4-3330) that I have installed Ubuntu
18.04.2 LTS on. I’m very new to Linux but I am very impressed as to how
well it works.
Following on from the thread “Has anyone tried Ubuntu” What applications do
Linux users use with their K3 for both logging and pan
Hi.
You can "fix" regular USB<>Serial devices, to always show up at the same
COM port, when the system (re)starts, or you (re)plug something.
Plenty of instructions on the interweb, including this which I had a
part in, that seems to work with Windows 10 & earlier.
http://www.w1hkj.com/doku/do
17 matches
Mail list logo
