Thanks to Keith and Grant, it made me dig into the depths of Gmail. I
enabled viewing of the Spam folder, off by default it seems, and set a
filter to be sure anything from the reflector or me is not sent to the
spam folder. Hopefully I will see this one back in due course.
Thanks
Martin, HS0Z
Hi,
So I had some success in fixing this and thought I would write it up
here briefly for future reference.
Short version
C6 on the K3REF module had become a 12 ohm resistor.
Longer version
Finding the 7T line only going to 3.5 volts or so was suspicious.
Measuring the resistance to ground o
Good Evening,
The seasons are progressing rapidly. Only a few days into autumn
with frost a day away. Even though I have a few grasshopper tendencies
mostly I'm an ant. Multiple piles of wood just need to get to the
house. When the frost knocks down most of the ferns I can find them.
Have you checked your junk or spam or trash folder on your e-mail server
account?
On 9/28/19 6:06 PM, Martin Sole wrote:
Hi,
I checked my mailman settings for this list and have enabled the option
*Receive your own posts to the list?*
Despite this I do not receive my own messages. Have I mi
i have the same problem. I’ve tried several times to reset the parameter for
the list, but I never see my own posts. Have to check the mailman archive if I
want to make sure a post actually got through ..
Maybe it’s a moderator level setting, or just a bug ..
Grant NQ5T
KX3 (8342)/KXPA100
Hi,
I checked my mailman settings for this list and have enabled the option
*Receive your own posts to the list?*
Despite this I do not receive my own messages. Have I missed a setting
elsewhere? It only happens on this list.
Thanks
Martin, HS0ZED
_
I had a similar issue with a TenTec power supply next to a TenTec transceiver.
The solution was to move the power supply.
Chuck Jack Hawley
KE9UW
Sent from my iPhone, cjack
> On Sep 28, 2019, at 12:35 PM, RIchard Williams via Elecraft
> wrote:
>
> Conrad,
> I had the same problem a few yea
Could someone tell me the correct size of the coaxial power plug on the
KXBT2 battery? The KX2 manual indicates the plug is a Switchcraft #S760
(2.1mm aperture, 5.5mm diameter.) I bought some genuine Switchcraft parts
and they will plug into the sockets on the radio itself but they do not fit
into
Hi elecraft lovers!
Does anyone has a KXV3 for sale?
73! Ilya
R3XA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list ho
Christmas Day 1967.
Snow falling heavily.
I had a 2 element Cubical Quad at 50 feet.
Separate feed lines for 3 bands.
I heard a loud CRACK. I kept occurring. Like an ignorant operator I had not
grounded the unused feed lines. I finally realized that the coax was arcing at
the PL 259. I grab
Their isolators built in the K3 on the LineIn/LineOut lines.
And there is no “tx DATA” mode. The “tx” is indicates which VFO is used for
transmit with an arrow above (A) or below (B).
Sent from my iPhone
...nr4c. bill
> On Sep 27, 2019, at 8:25 PM, Jim Miller wrote:
>
> Do you hear the hu
Conrad,
I had the same problem a few years ago when I placed my Alpha 9500 on the left
side of my K3S. After much perturbation, I finally figured what the issue was.
The power supply for the Alpha 9500 is on the right side of the Amp, and the
isolation transformers for the line in and line out
Here is the list of stations checking in to the SSB net for Sunday, September
22, 2019. The net is open to all stations and meets at 1800Z at 14.303.5. The
time stays at 1800Z so the net meets an hour earlier after daylight savings
time ends. Thanks again to the stations who help with relaying.
Hi,
Might have been a bad choice of title!
Indications are the 7T transmit bias line is faulty somewhere. 7R is
normal, 6.8-6.9 volts, but the transmit 7T line is very low, around 3.8
volts. I suspect this is the cause of no power out anywhere as the
signal switching is not working. The 7T li
Hi,
About 18 months ago both Q4 and Q5 the output devices in the LPA of my
early K3 failed. I suspect this was partly my fault, trying to drive an
amp known to take off and be generally unstable. I replaced the
transistors and though at the time I had no hard and fast bias setting
data the ra
Good morning Conrad,
do you have the possibility to check the signal on an SDR or spectrum
analyzer with sufficient resolution. That might be helpful to determine the
origin of the noise and hence countermeasures.
73/Roger, DL5RBW
-Original Message-
From: elecraft-boun...@mailman.qth.net
16 matches
Mail list logo