Not long ago I ordered several small items (coupler, W1 meter, etc) and it
all arrived before I expected it. So while they are somewhat snowed by
World events, work is getting done. I refrain from asking for a status of
my K4, knowing it will happen when it happens. My Christmas, birthdays and
Hello,
Recently I noticed that my transmit frequency is getting further away from
the receive and I have to use RIT in order to hear stations coming to my CQ.
Before, the difference was very small, just few Hz, but now I tune RIT up to
.25 - .30 kHz and it's not getting any better.
I went
The lastest shipping status of all Elecraft items is at:
https://elecraft.com/pages/shipping-status
Just got my K2 kit that I ordered in November.
Bruce, WB6IZG
>
> On 2/8/21 8:45 PM, Dick Bingham wrote:
> > Has anyone received anything from Elecraft lately ? I have been
> > waiting for the
Dick,
If you send an email to sa...@elecraft.com, the Elecraft sales team can
probably assist you. Please bear in mind, they have all been impacted by
both COVID and severe wildfires in California.
Thanks and 73,
Ian, NV4C
On 2/8/21 8:45 PM, Dick Bingham wrote:
Has anyone received
Has anyone received anything from Elecraft lately ? I have been
waiting for the units I ordered many weeks ago to arrive.
The extra 7dB or so of output power will be appreciated !
73 to all - Dick/w7wkr
__
Elecraft mailing list
Home:
If you return to a band but at a different K3 VFO frequency, the new
frequency may be outside the P3's span. If that happens, the P3 will
re-tune using an algorithm determined by the MENU > FixMode setting.
If you want to be sure the P3 frequency doesn't change you can set
FixMode to
I use the Fixed Tune Mode too but the center frequency sometimes isn't
remembered when returning to a previously-used band. If it makes any
difference, I'm usually using N1MM+ (often with Win4K3Suite) to control the
radio.
73, Jim N7US
-Original Message-
From:
Make that after your move commands within the macros...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2/8/21 2:43 PM, Mike Flowers wrote:
There are apparently some issues with the
Are you adding delays after your move macros? I had that problem, then
added some delays, and all problems of that nature ended.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On
That answered my question, thank you!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2/8/21 2:44 PM, Fred Jensen wrote:
Don't understand your "follow option" question. I run mine
If I could throw my .02c in here:
Not all rtl dongles are the same. I have 2 of the rtl-sdr dongles sitting
in front of me. The earliest ones received 27mhz thru appx 1700 mhz. There
is no front end to speak of, and they are prone to overload. To receive
below 27 mhz required a hardware mod that
If I could throw my .02c in here:
Not all rtl dongles are the same. I have 2 of the rtl-sdr dongles sitting
in front of me. The earliest ones received 27mhz thru appx 1700 mhz. There
is no front end to speak of, and they are prone to overload. To receive
below 27 mhz required a hardware mod that
Don't understand your "follow option" question. I run mine in Fixed
Tune Mode which holds the span [i.e. edge frequencies] constant and the
two VFO's show up as two vertical cursors in the spectrum display. The
cursors move as I tune, and when I go beyond the edge, the span shifts
by the
There are apparently some issues with the P3 firmware retaining the frequency
and center by band.
I reported one issue where the P3 would return to an entirely different band
than the one commanded. The head of FW for Elecraft confirmed this is a bug
that needs fixing. When that will
How does one set the follow option, I just looked through the menu of
the P3, and don't see it.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2/8/21 12:39 PM, Fred Jensen wrote:
OK, this is my second attempt to get this message through the mail list.
I purchased a K2 kit (SN 7973) in November 2020 and just received it a week
ago or so. I am trying to install the LCD and backlight and am having
problems. The LCD sits too high and the pins sit just above the top solder
Yes, it has been discussed, and yes, that is the case. It seems to be
most prevalent when returning to a band after moving off for a Q, such
as in NAQP's when the return is being commanded via CAT command. In
fairness to the Elecraft developers, it /*appears*/ that it is
attempting to put
A special thanks to AE6JV, Bill in New Hampshire for his regular check-ins.
Steve
WM6P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On 2021-02-08 8:48 a.m., Eric Lanzl wrote:
Regarding the RTL SDR dongle. I notice that it says that the dongle will
go down to 500 khz with reduced sampling below 24 mhz. I wias wondering
if one needs to get an up converter to get it to work?
The tuner chip does have a sort of "bypass" mode that
Just curious, I couldn't remotely power on and talk to my KPA1500 today,
and I had to power cycle using the switch on the power supply. When it
came back up, it was all black boxes on the top row of the display.
It needed a firmware (re-)upload and it seems to be fine now, but I'm
just wondering
Eric,
I have a NooElec R820T that does work from 25.85 MHz to 1766 MHz
Anything lower that that needs an upconverter afaik.
I can tell GQRX to go lower but it then detects nothing anymore...
GQRX is a Linux SDR program where a funcion that says "No limits" allows
to tune higher and lower than
Greetings,
I'm going through the cal procedure for transmit bias. Once I tap
XMIT, it seems to stay there forever with the current bouncing around
between .04-.06 A but it never seems to complete. Am I supposed to
cancel by hitting XMIT again or am I supposed to wait ?
Tnx es 73 - john
These dongles are mediocre, yes they are cheap, but they are virtually
useless for anything other than a door stop.
The lowest cost, but useful, SDR receiver is an SDRPLAY RSP1A. With the
free RSPUno software the RSP1A will track a K3 via Omnirig, clicking on a
signal on the RSPUno spectrum jumps
7.280 at 1900Z
Thanks to my relay stations and all those checking in.
See you all next Sunday.
WM6PSTEVE GA net control
K8NU BILL NH
WB4YBYNORM MS
N0MPM MIKE IA
KB9AVO PAUL IN
K1NWBRIANRI
NC0JW JIM
Regarding the RTL SDR dongle. I notice that it says that the dongle will go
down to 500 khz with reduced sampling below 24 mhz. I wias wondering if one
needs to get an up converter to get it to work? Or will the reduced functioning
be ok for a basic pan adapter. Also, does it require a buffer
25 matches
Mail list logo