A few months ago K4 #1200 came to live in my shack and K3 #4083 got a
vacation on the shelf. It was working fine up until then, in regular use.
When I pulled it down in preparation for Field Day it no longer had any
receive on any band. Full output on every band except 10 meters where it
only did
Kevin,
You were good on 20 meters with some deep QSB but OK copy. Then we got whacked
by the sun pretty hard between nets and the story changed on 40 meters. I could
hear you at first but your signal was below the noise peaks so your CW was
getting chopped up and nearly uncopyable.
Hoping for
Good Evening,
Twenty meters was fairly quiet but minimally productive. There was
little thunder storm noise on either band. That should give me a hint.
On forty meters Dwight, WM5F mentioned a solar storm. When I signed off
I came in here to check. Sure enough that roaring sound drove h
Thanks to Christian for the sale
Ken, W2GIW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.n
He never said what kind of antenna he was using. A lossy antenna is
much worse on transmit than it is on receive. You can easily tolerate
20 dB or more loss on receive (for pretty much ANY rig) ... but not on
transmit, especially in a contest like FD where there is tons of QRM on
the other
On 7/2/2023 7:54 AM, Christian Friess wrote:
I don't own a K4. But my experience let me bet "RF got into a cable".
I wonder what power you are using.
There is a SCREAMING Pin One Problem at the connector for the paddle
and/or the key. From what I can discern from Elecraft's response, it is
th
That was not my experience.
Right out the bat we were occupying a frequency and calling. We were heard so
well we found ourselves at the bottom of a pileup for the next two or more
hours.
You might want to take a closer look at your various mic and transmitter
settings. These have to be ad
Hi All
What software can you use on a Mac in place of Spectrogram to set up filters?
Any details on the set up the S/W that would be helpful too!
Thank you and 73
Francis KB7IP
K2
__
Elecraft mailing list
Home: http://mailman.qt
Hi Allan,
In your original post you said your
K2 seemed somewhat 'deaf.'
Does that mean you hear no signals at
all on any band, no signals on one or
two bands, or just weak audio with
antenna or signal generator input?
Since your K2 has the K160RX option,
I would check that the RX antenna
is not
Hi from Bavaria,
I don't own a K4. But my experience let me bet "RF got into a cable".
I wonder what power you are using.
Have you hooked the K4 to a computer? If so, it could be a problem with
the port or software.
Good Luck
Chris, DL2MDU
Am 02.07.2023 um 10:38 schrieb Jeff Drew via Elecra
I got one when they first came out. It was so much fun that I think I played
with it for two days straight without stopping for anything except necessary
breaks and sleep.
Gerry Leary Wb6ivf
On Jul 1, 2023, at 1:37 PM, Gary Memory wrote:
Hey Rob……I ordered it in January. I did the internal
The K4 does one of two things:
* gets stuck in transmit mode. Remedy: turn off radio.
* Will not transmit when PTT or
Keyed. Remedy: None
I changed pistol grip PTT which did not corrrect problem. Need to know the fix
for this problem urgently.
Jeff
N4JDU
Sent from my iPhone
12 matches
Mail list logo