[Elecraft] K3 sidetone level

d any helpful information. Many thanks, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] Microphone suggestions for K3

Many thanks to all who replied with good information. I am experimenting with several microphone options, including MC-60, Electrovoice 638, Shure 450, Heil HM-10, Ten-Tec 705, and Icom SM-50. I will make sure to update you with what I find. Best 73, Chris KM1B On Fri, Nov 1, 2024 at 6:02 PM

[Elecraft] Microphone suggestions for K3

Hello, I want to know what microphones you are using with your K3. I have a Kenwood MC-60, which works well, but I also want to know if there is a better options that you suggest. Many thanks, Chris KM1B __ Elecraft mailing list Home

Re: [Elecraft] Some issues with K3

The issue has been resolved. It was caused by incorrect filter offset setting. Special thanks to Joe, W4TV. Chris KM1B On Sun, Oct 27, 2024 at 1:06 PM Joe Subich, W4TV wrote: > > > > However, the K3 with 8xxx serial number has very tinny receive audio > > in USB mode, and

[Elecraft] Some issues with K3

. TX and RX EQ settings, mic gain, and comp level are identical, and I am using the same MC-60 microphone. Am I missing something? I appreciate your thoughts on this. The bottom line is that I am with a good working K3, at least. Many thanks, Chris

Re: [Elecraft] KE7X Fred Cady book for K3

Many thanks to all who replied to my posting. I found what I need and am all set. Best 73, Chris KM1B On Wed, Oct 16, 2024 at 10:28 AM Chris wrote: > Hello, > > Please let me know if you want to sell your KE7X Fred Cady's book for K3. > > Many th

[Elecraft] KE7X Fred Cady book for K3

Hello, Please let me know if you want to sell your KE7X Fred Cady's book for K3. Many thanks, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] K3 settings question

Many thanks to all who replied to my question. They both work exactly the same after matching all settings. One has more options than the other, but I will keep both because they are technically the best radio I have ever used. I might get a K4 later. Best regards, Chris KM1B On Tue, Oct 8

Re: [Elecraft] K3 settings question

Hi Ian, That was it. That fixed the low volume issue. It was set to 5, which is very low. Many thanks, Chris KM1B On Tue, Oct 8, 2024 at 5:46 PM Ian Kahn wrote: > Chris, > > Do you have Tech Mode turned on in your K3's menu? This enables menu > options that are otherwise

Re: [Elecraft] K3 settings question

They both have AF GAIN at HI. I am going to update the firmware and will see if it is related to AGC settings. I am still learning as these two K3's are fairly new to me. Thanks for your info. Chris KM1B On Tue, Oct 8, 2024 at 5:20 PM Chris wrote: > K3 with 8xxx has firmware version

Re: [Elecraft] K3 settings question

K3 with 8xxx has firmware version of 5.29, and I don't see AGC settings other than AGC DCY and AGC HLD. I assume I need to update the firmware to the latest one. Chris KM1B On Tue, Oct 8, 2024 at 4:01 PM David Sumner wrote: > Chris, check the settings under CONFIG: AF GAIN. It is sw

Re: [Elecraft] K3 settings question

be at 12 o'clock to have a comparable audio volume. Any help would be greatly appreciated. Thanks, Chris On Mon, Oct 7, 2024 at 10:19 AM David Hachadorian wrote: > It's probably the AGC settings. Here are my favorites: > agc dcy soft > hld 0.2 > pls nor > slp 000 >

[Elecraft] K3 settings question

have updated KSYN3A modules. This K3 with a lower serial number has KAT3, and my current K3 doesn't because I have KAT500. Any suggestions? Many thanks, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/lis

[Elecraft] KDSP2 question

t, or should I also check Q5 and Q6? Thanks, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] K1 frequency off by 5.5kHz

Hello, I picked up a K1-4 at a hamfest today, and it seems working fine with one issue. The frequency is off by 5.5kHz. Can someone guide me how to correct this? Many thanks, Chris KM1B __ Elecraft mailing list Home: http

[Elecraft] K2 PA KEY (J7) stopped working

Hello, My K2/100 has an issue with the PA KEY (J7). With the key down, it has about 350k ohms as opposed to the specified 3 ohms. Will replacing Q9 fix the issue, or can there be other areas that can cause this issue? Many thanks, Chris KM1B

[Elecraft] Parts availability

Hello, I am looking for E620021 and E620044 parts to make voltage and frequency probes. Does anyone know where I can buy them from a third-party supplier? Are they available from Elecraft? Many thanks, Chris KM1B __ Elecraft mailing

Re: [Elecraft] Origin of Signal-Fine Structures in SSB Pass Band Waterfall, mainly 80/40m

nvenient but some may have bad effects on our spectrum. Cutting corners in design affects spectrum users, and having dozens of devices in every home adds up... 73, Chris K0PF On 1/6/2024 6:33 AM, Andy via Elecraft wrote: I have a general question to better understand analysis of SSB ( RX P

[Elecraft] WTB: K2 Frequency Counter Probe

Hello, I misplaced mine a while ago and want to buy one if you have an extra or don't need it. Please reply with the price shipped to 02038. Many thanks, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/ma

Re: [Elecraft] KX3 2M transverter

Yes, Steve, all modes supported by the KX3 are usable on all bands, including those using either internal or external transverters. I am using my KX3 now primarily as the I/f for my 10GHz rig and have used it on multiple modes including CW, SSB, FM, AM, and digital. Chris Cox, N0UK chr

[Elecraft] WTB: K2 Frequency Counter Probe

Hello, I misplaced mine a while ago and want to buy one if you have an extra or don't need it. Many thanks, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qt

Re: [Elecraft] KX2 question

version of the manual that came with the radio. I downloaded the e-version, but my computer does not fit in my day-pack! 73, Chris K0PF On 12/4/2023 9:13 AM, Walter Underwood wrote: This all-text document has a physical description and documents the audio-CW feedback. https

Re: [Elecraft] KX2 question

. It should be in the fw release notes, really... 73, Chris, K0PF On 12/1/2023 9:59 AM, Bud wrote: Folks … I recently invoked the latest firmware update on my KX2 (s/n 1031). Upon beginning use of the KX2 after the firmware update two changes to the operating configuration were noticed

[Elecraft] My K2 has USB mode off by about 1.9kHz

Hello, I have a K2 with its USB off by about 1.9kHz. This K2 was built by someone, and I am the third owner. How do I calibrate it? Moreover, the audio of USB mode is a little harsh to my ears. Everything else seems working fine. Thanks, Chris KM1B

[Elecraft] Last Call Upgrade Kits for K3 SOLD

any), ZELLE and VENMO is okay for payment. Personal or Cashier's checks are okay, but time will have to be allowed for ample time to clear and be deposited. Please contact me off list. QRZ email is current. 73 Chris K

[Elecraft] For Sale Last call upgrade kits for K3.

hecks are okay, but time will have to be allowed for ample time to clear and be deposited. Please contact me off list. QRZ email is current 73 Chris KD6EOS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] QST - My new book about CW and Morse Code

W and SKCC group site, and the feedback from readers has been almost embarrassing. One fellow called it a "modern-day seminal work on CW." Several said they wish they had it when starting out. ALL have called it a good read. Enjoy!

Re: [Elecraft] K3 & K3S Options Last Time Buy Update (12/02/2022)

or should I have heard about the KSYN3A already? Chris Cox, N0UK chr...@chris.org https://www.credly.com/go/IR77aRbH2rFDdOiymuxu2w > On Feb 28, 2023, at 14:53, Pete Smith N4ZR wrote: > > Well, for what it's worth, I'm one of those waiting 2+years for an update > kit, a

Re: [Elecraft] K3- Part fell out!

3.3 ohm SMT resistor? Chris KD4PBJ > On Jan 23, 2023, at 15:43, Rich WC3T wrote: > > My totally uneducated guess is that it’s a surface mount capacitor. I did > an image search and found what resembles you have. That’s all I can offer. > Good luck. > > 72, >

Re: [Elecraft] K2 with narrow USB transmit audio

Hi Don, Thank you for the info. The issue with my K2 is with the transmit audio, so would the same BFO frequency for the receiver affect the transmitter? Best, Chris KM1B On Sun, Nov 6, 2022 at 1:56 PM Don Wilhelm wrote: > Chris, > > That condition is normally the result of

[Elecraft] K2 with narrow USB transmit audio

Hello, I have three K2's, and one of them has a very strange symptom. It works well in LSB and CW, but USB transmit audio seems very narrow. Receive audio in all modes works well with no issues. Thank you in advance, Chris

[Elecraft] Faulty KDSP2 module

Hello, I have a faulty KDSP2 module. The message that I get from DISPLAY button press is in the attached picture. Normal state should show 'S1 nr nt' but mine shows 'Sn G 7.0'. I have replaced it with a working DSP module, and it works fine. Any ideas?

Re: [Elecraft] My K2 lost audio

It was found to be a faulty KDSP2 module. Can anyone help me with troubleshooting? The battery was checked OK, and there is no visible issue anywhere. Any suggestions? Many thanks, Chris KM1B On Fri, Jul 29, 2022 at 2:47 PM Don Wilhelm wrote: > Chris, > > Do you still have side

Re: [Elecraft] My K2 lost audio

check if there is any solder joint. Many thanks, Chris KM1B On Fri, Jul 29, 2022 at 1:47 PM Don Wilhelm wrote: > Chris, > > Do you still have sidetone? If so Control Board U9 is still active, so > check the MUTE signal and CB Q6 and Q7 operation. > > If you have the KDSP2 i

Re: [Elecraft] My K2 lost audio

d off long enough, but it disappears about 10 minutes after powering on, so something must trigger the loss of receive audio. Any suggestions will be helpful. Many thanks, Chris KM1B On Tue, Jul 26, 2022 at 10:43 AM Chris wrote: > Hello, > > I have two K2/100, and one of them deve

[Elecraft] My K2 lost audio

the issue must be in the AF section. Any suggestions? Many thanks, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

Re: [Elecraft] Oh Crap

That looks interesting, Ken. I had not seen such a tool before. I’ll dig deeper and see if they make a version for 6.3mm plugs too. Chris Cox, N0UK chr...@chris.org https://www.credly.com/go/IR77aRbH2rFDdOiymuxu2w > On Jul 20, 2022, at 11:53, Ken Winterling wrote: > > How about

Re: [Elecraft] Oh Crap

I helped a neighbor remove a broken headphone connector from her daughter's iMac laptop. I used a pin vise and a tiny drill bit like I use for drilling holes in PC board. I drilled by hand into the broken connector barrel using the pin vise and slowly worked the broken plug body out.

Re: [Elecraft] Oh Crap

I have suffered the very same failure but on my K3. Despite extensive attempts on my part, removing the dislodged tip has proven futile and it appears that the female jack will need to be replaced. Removing it might help but it’s just too finicky for me. Chris Cox, N0UK chr...@chris.org

[Elecraft] K3 audio problem

, with the SP3 external speaker plugged in, the problem goes away! Any insights much appreciated. Chris VK2ACD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] Have a K-2 SN 01049

ate which upgrades and options have been installed. > >>> If it is below SN3000, and has not been upgraded, it will have a low > >>> price, but if above 3000 with all upgrades he should get a good price. > >>> There is a good list of upgrades in the K2AtoB instructi

[Elecraft] Support email

hoping to combine the minor radio repair with installation and checkout of the two items that I had ordered. Chris Cox, N0UK chr...@chris.org https://www.credly.com/go/IR77aRbH2rFDdOiymuxu2w __ Elecraft mailing list Home: http

[Elecraft] K1 accessories

anyone offer any thoughts on where I might ask around - or advertise a "wanted" Other than eHam.net. Thanks in advance, Chris VK3QB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] K2 SN 25xx has very low sensitivity in 20 and 80m bands

where to check first? Thank you. DE KM1B Chris __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

Re: [Elecraft] Shipping via UPS - A Lesson Learned the Hard Way

-Haul. Chris KM1B On Mon, Apr 11, 2022 at 8:31 PM Wes wrote: > Good Grief. > > I look at these groups as like starting a conversation with my neighbor > over the > fence about crab grass. (Where I live we have neither fences or grass, > crab or > otherwise. so I'm sp

Re: [Elecraft] KXPD2 paddle not working

Hi Gary, You can disconnect the paddle and do a continuity check with your multimeter. It seems that the problem is on the paddle. You can easily disassemble it to see where the problem is. I did clean mine, and it is fairly easy. Best 73, Chris KM1B On Tue, Mar 8, 2022 at 11:57 AM Gary

Re: [Elecraft] K4 Remote Software?

Wayne said: "Did I mention we're also working on a DX tractor beam?" No secret there - the attraction from Elecraft is very strong... 73 - Merry Xmas - and HNY Chris NW6V DDddd-dddDD __ Elecraft mailing

Re: [Elecraft] [K2] Cheap power supply for KBT2

Hi Jim, Excellent article. I haven't checked if it is a source of noise, but it doesn't quite matter because this is a charger, not a power supply. I only use it when I need to charge a battery, so it is OK. Best 73, Chris KM1B On Wed, Nov 24, 2021 at 2:03 PM Jim Brown wrote:

Re: [Elecraft] [K2] Cheap power supply for KBT2

SXJ%2CB08R9VGGJH%2CB081YP9Y3K%2CB07CZ7KWP3%2CB00CV6HZSG%2CB089SV4W5H%2CB085CD1F5V%2CB082VQJQJP%2CB07B4V3HC4%2CB075YN8XLP&th=1 Chris KM1B On Tue, Nov 23, 2021 at 9:47 PM Douglas Hagerman via Elecraft < elecraft@mailman.qth.net> wrote: > Looking for ideas for a cheap 14 volt wall wart type powe

[Elecraft] K3s

I am trying to use my K3s with a program but it does not list the K3s in the drop down list is there another rig from the drop down list that would let me use that is the same as the K3s thanks Chris -- This email has been checked for viruses by AVG. https://www.avg.com

Re: [Elecraft] Last round of K3 upgrades

I’ve heard nothing since sending in my order back in the early Spring. Nothing either on the KX3 TxInhiibit VOX bug reported to Elecraft in August last year. Chris Cox, N0UK chr...@chris.org > On Oct 1, 2021, at 10:50, Pete Smith N4ZR wrote: > > It's been more than a month si

[Elecraft] P3 price

Wanting to know the price of new P3 and SVGA board in US$ before they were discontinued. thanks Chris VK2ACD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] Problem with my KXPD2

Hello, My KXPD2 paddle has some issues. It moves very sluggishly and causes errors. The manual doesn't have any service instructions. Is anyone else having the same problem? Any suggestions? Thanks, Chris KM1B __ Elecraft mailing

Re: [Elecraft] KX3 FW - N0UK tx inhibit & CW sidetone bug reproduced

Still hoping for some resolution to this problem since it’s now been a year since it was reported to and acknowledged by Elecraft as being a firmware bug. It really renders the KX3 as fairly useless as an I/F rig for microwave transverters if you need the TxInhibit function. Chris Cox, N0UK

[Elecraft] 10-pin connector for KAT2

Hello, Is there an easy source for the 10-pin connector for KAT2, or do I have to get it from Elecraft directly? Mine needs to be replaced. Thanks, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] K3S connections for Winlink Express -

ngs/ Radio: Set both ports to COM4 and the rate to 38,400 b/s. Neat! Chris NQ8Z -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailm

[Elecraft] K3S connections for Winlink Express -

setting on Winlink. All the work has been with ARDOP Winlink sessions. Do I need a cable from the RS 232 port to the computer USB port? Do I need a K3S special setting? Thanks, Chris NQ8Z -- Sent from: http://elecraft.365791.n2.

Re: [Elecraft] What kind of hook-up wire does Elecraft use?

feet of a size/color at a time. When I started my work was buying the wire from Digi-Key and it was $60 for 100 ft spool. They no longer do and didn't know about other supplier. I can connect anyone interested with the rep there I use. Chris KD4PBJ Monteagle TN > On May 2, 2021,

Re: [Elecraft] OT: High school drafting class, ~1975

the vision in your mind's eye crystalizes into reality. Thanks for sharing your visions with us :-) 73 Chris NW6V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: ma

Re: [Elecraft] Copying CW and Pitch

fferences are easier to copy. I did have to reprogram myself to listen at the lower frequency - familiarity had bred contentment. 73 Chris NW6V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman

Re: [Elecraft] 6.3mm to 3.5mm adapter broke off inside the K3 paddle jack

external keyer or straight key to send code. Oh, what a palaver! Chris Cox, N0UK chr...@chris.org <mailto:chr...@chris.org> > On Feb 27, 2021, at 1:52 PM, Chris Cox, N0UK wrote: > > Thanks for that suggestion, Jim. > > Chris Cox, N0UK > chr...@chris.org > > >

Re: [Elecraft] Subject: Waaay OT: A new kind of QRM to be aware of ... warning issued by FCC today

Spot on,Phil. Chris Cox, N0UK chr...@chris.org > On Jan 18, 2021, at 12:07 PM, Phil Kane wrote: > > On 1/18/2021 6:10 AM, Steve Hall wrote: > >> During my hamming of over 50 years, the FCC has never felt it necessary to >> threaten hams not to break the law, that i

Re: [Elecraft] Mag Loop from MFJ

absolutely gobsmacked at how well such a physically small antenna plays on HF and am willing to stand up for MFJ (at least in this particular case). YMMV, of course… Chris Cox, N0UK chr...@chris.org __ Elecraft mailing list Home: http

Re: [Elecraft] K3 USB cable

Thanks Dick and Mark for your replies. My cable was purchased from elecraft, I will get an FDTI adaptor and see how that goes. Chris VK2ACD On Mon, Jan 18, 2021 at 10:42 AM Dick Dievendorff wrote: > This is probably a message from a Windows USB driver install. I don’t > recall addin

[Elecraft] K3 USB cable

? thanks ChrisVK2ACDK3/10 serial no. in the 600's __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

Re: [Elecraft] tip of 3.5 mm plug remains in key jack

I had this happen with a neighbors daughters laptop. I was able to get a small diameter drill bit like is used for drilling pcb holes and using a pin vise put a few twists of the bit into the broken part of the connector. Then I gently pulled it out. Chris KD4PBJ > On Jan 15, 2021, at 11

Re: [Elecraft] Oscilloscope recs

I had a zoom based oscilloscope demo with our Keysight rep last Wednesday. They said the $25 k scope I got for our lab at work has the same oscilloscope ASIC chip that the million dollar one has, it's just the bandwidth you are paying for. Chris KD4PBJ > On Dec 19, 2020, at 12:32 PM

Re: [Elecraft] K3 transverter connector question

Tuning on my K3 stops at exactly 30.000MHz. Chris Cox, N0UK chr...@chris.org > On Nov 13, 2020, at 8:08 AM, Chris Cox, N0UK wrote: > > Hi, Martin. > > Thank you - that is great to hear. I will give that a try and see. I didn’t > realize that I could actually tune ab

Re: [Elecraft] K3 transverter connector question

Hi, Martin. Thank you - that is great to hear. I will give that a try and see. I didn’t realize that I could actually tune above 30MHz directly, although I had not even tried. VY 73! Chris Cox, N0UK chr...@chris.org > On Nov 13, 2020, at 3:02 AM, Martin wrote: > > Chris, >

[Elecraft] K3 transverter connector question

the low-level output available by default? -- Chris Cox, N0UK, G4JEC chr...@chris.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] K4 vs. K4D Question

eo music. Anyway, diversity reception was unquestionably the key to 80M DXCC from this QTH. Point is: if my K3 hadn't already had that second receiver, it's unlikely I would have added one just to try. So if you can swing the cash - like a good scout: "be prepared." 73 Chr

Re: [Elecraft] K4 Pricing Posted

d bit better. ;-) 73, Chris, W2PA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

[Elecraft] KX3 Tx Inhibit CW-VOX problem

. Chris Cox, N0UK Chris Cox, N0UK chr...@chris.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

[Elecraft] Continuing saga with Tx Inhibit and the KX3 - possible firmware bug?

the effect. Again, all works just fine if I don’t try to key the paddles before PTT sequencing has changed over. Chris Cox, N0UK chr...@chris.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

Re: [Elecraft] KX3 ACC2 GPIO

Just as final follow up, a mosfet switch worked for my requirements perfectly. 73! Chris Cox, N0UK chr...@chris.org or chr...@britishcaranddriver.com > On Aug 31, 2020, at 18:26, Chris Cox wrote: > > I’ve thought the problem through further and have decided to use a simple > m

Re: [Elecraft] KX3 ACC2 GPIO

I’ve thought the problem through further and have decided to use a simple mosfet switch in the connector shell to invert the TXInh logic sense and configure the KX3 for -TXInh instead of +TXInh. Hard switching the GPIO pin showed that to be a usable workaround. 73! Chris Cox, N0UK chr

Re: [Elecraft] KX3 ACC2 GPIO

Thanks all - hopefully it now knows what a transverter is. Chris Cox, N0UK chr...@chris.org > On Aug 31, 2020, at 1:31 PM, Raymond Sills wrote: > > HI Chris: > > You have to "teach" the dictionary to understand that transverter is a real > word. For whatever r

Re: [Elecraft] KX3 ACC2 GPIO

And why does my Mac ALWAYS rewrite TRANSVERTER as TRANSPORTER?! Chris Cox, N0UK chr...@chris.org > On Aug 31, 2020, at 12:50 PM, Chris Cox, N0UK wrote: > > I wish to interface my KX3 to my portable 10GHz transporter system. I have > the transporter’s PTT sequencer configured

[Elecraft] KX3 ACC2 GPIO

not exactly ideal. Anyone else done this or similar and, if so, what was your solution? 73 Chris Chris Cox, N0UK chr...@chris.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] RE Alexmic

I suppose an off list email address would help. ve3xkz at gmail dot com. Thanks 73 Chris VE3XKZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] Wanted to buy, an Alexmic

tever and pay for shipping of course. Thanks 73 VE3XKZ Chris __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by:

[Elecraft] KX2 to Tentec 418 amplifier

have done this. Best 73, Chris KM1B __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please

Re: [Elecraft] KAT500 Remote software and KPA500 remote software

As per the engineers and the experience of others, the behavior you're seeing is not part of the design per se. 73 Chris NW6V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

Re: [Elecraft] Self-fusing liquid electrical tape

Right sir I understand. I just mean I don't have large towers and big antennas. Just want be protected since we are up high. Chris > On Jun 5, 2020, at 1:09 PM, Jim Brown wrote: > > On 6/5/2020 10:23 AM, Chris Waldrup wrote: >> This is probably overkill for QRP but I w

Re: [Elecraft] Self-fusing liquid electrical tape

in ceramic form and you're good to go. Chris KD4PBJ > On Jun 5, 2020, at 12:23 PM, Chris Waldrup wrote: > > Hi Phil, > > I use Erico One Shot cad welds on my workshop grounding system. Everything is > tied together with cad welded bare 6 AWG and I have 8 foot ground

Re: [Elecraft] Self-fusing liquid electrical tape

exposed rock in certain parts of the property. This is probably overkill for QRP but I wanted to do it right like we used to do in broadcast. Chris KD4PBJ > On Jun 5, 2020, at 10:19 AM, Phil Kane wrote: > > On 6/4/2020 8:50 PM, Ed Tanton wrote: > >> I should have mentioned

Re: [Elecraft] "2" or "3" Paddle

ways, YMMV :-) 73 Chris NW6V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help su

Re: [Elecraft] scratchs on display

Thanks everyone for all of the great suggestions. -- Chris Cox, N0UK, G4JEC chr...@chris.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] PX3 acrylic scratch removal

Thanks Alan and Mike for the two suggestions. And, yes Mike, you’re correct about adTHANKSvance! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraf

[Elecraft] PX3 acrylic scratch removal

Can anyone recommend a safe polish or other to aid in buffing out a minor surface scratch on the plastic (Perspex/acrylic?) screen cover on a PX3? inTHANKSadvance Chris, N0UK, G4JEC __ Elecraft mailing list Home: http://mailman.qth.net

[Elecraft] K3 High SWR

everything but the K3 when I went to an HOA restrictive community for five years. Any help would be appreciated. Chris Pinholster k4...@mac.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

Re: [Elecraft] Excel Test

Walter, Bravo!. :-) I'm going to steal this line... :-) 73 Chris NW6V On Tue, 25 Feb 2020 08:09:02 -0800 AM wrote: > > "Turning a PDF back into structured text is like turning hamburger back > into a cow." > > > __

[Elecraft] P3 & VGA card

. Running a low cost sdr and the software to drive the K3 from the PC works well though. Vy pleased with the K3S, but a tad disappointed with the P3 TBF. Vy 73 Chris F1rpo __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] FS: K3S/10 - $1095 shipped USPS

Calling an upgraded K3 a K3s may be an overstatement, but the price seems pretty good for an upgraded K3s. Chris AD1AD On Thursday, January 9, 2020, Clay Autery wrote: > I'm sure this is just a misunderstanding. No one would intentionally > misrepresent their Elecraft gear

Re: [Elecraft] KPA1500 RFI on 10 Meters

ct any band below 10m but appeared very broad-banded above, using an SDR receiver. 73, Chris, W2PA On 12/14/2019 4:43 PM, K9MA wrote: I guess it just shows how little I've been on 10, but I've had the KPA1500 for over a year now, and I just noticed that when I turn it on, my noise f

Re: [Elecraft] case for KX3?

wall, the BNC connector was about half an inch or so from the right wall. The 2800 would have more than enough room. For reference, I keep mine in a Pelican 1200, and there is just enough room for the transceiver, hand mic, and power cable. I hope this helps. 73, Chris, AC4MP > On Nov 9, 2

Re: [Elecraft] 4k monitors for the shack, late 2019

-on ferrites and extra-long cables (for enough turns) to filter any remaining RFI. Also, If you can get the monitor at a best-buy or some other place that allows returns without restocking fees, you should be able to find one that fits all your criteria. Please let us all know what you find that w

Re: [Elecraft] KX3 fuses

ends. With the Powerpoles, I can use on any cable close to the power source. Hope this helps, Chris, AC4MP > On Oct 15, 2019, at 5:19 PM, Don Wilhelm wrote: > > Terry, > > The KX3 has internal protection, but a fused power lead (only necessary in > the positive lead) p

[Elecraft] September 25th is VAIL Day - The First Telegrapher

n the 25th, and I'll be calling "CQ VVV." There's a picture on my QRZ page. The key works well up into the low 20s, but I'm always happy to QRS. Feel free to join in and send some Vs yourself! Hope to work you on the air! Oh, and I'll be using a K3 and KPA500...

Re: [Elecraft] KX3 remote a K3

It appears not, although I was wondering the same thing. -- 73 Chris Cox, N0UK, G4JEC chr...@chris.org On Mon, 22 Jul 2019, Frank Krozel wrote: > I’m not sure if this is ever been asked before but can a KX3 remotely control > a K3? Off-line responses please de Frank KG9H Sincerely,

  1   2   3   4   5   6   7   8   9   10   >