[Elecraft] FS: K2/100 complete system

with the K2 or separately. If interested please reply off list to K3OOL at yahoo.com and I can send you pictures and more details. 73, Craig Miller K3OOL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help

[Elecraft] KX1 RF Power Question

I just finished adding the 30/80m module to my KX1 which has the KXAT1 ATU. While adding the 30/80 module I also installed the output power fix involving the two resistors in the driver/final. The unit seems to work FB but the output power is a bit lower than I expect. I measured the output powe

RE: [Elecraft] Source of poor solder joints?

k and re-flow all the connections on a device after things have cooled off completely. It means taking twice as long to do the soldering but that's no problem because with an Elecraft kit the building process is at least half the fun. Craig Miller K3OOL K

[Elecraft] Noise Blanker & 60m option for K2

I just finished building and installing the KNB2 andK60XV option boards. As usual with Elecraft it all went together FB and runs as advertised with no problems. I do have two complaints, however. 1. The K60XV has no toroids! What kind of Elecraft kit is it with no toroids to wind? Where's the

[Elecraft] XV60 'Partial Install'

I'm about to build the XV60 60m / transverter adaptor for my K2. At the moment, and for the forseeable future, I have no use for the transverter capability; I just want to try operating the 60m band. Is it possible to populate just the part of the board that pertains to the 60m capability and the

[Elecraft] Build Order: KPA100 & KAT100-1 ?

I presently have a K2 with KAT2 internal tuner. I do not have a KIO2 installed. I've just purchased the 100 watt amp and external tuner. My question is which order I should build and test these two units: KAT100 first but no way to communicate with it to test it, or KPA100 first with no way to use

[Elecraft] RE: FS: KAF2

Sold. Thanks to everyone for their interest. 73, Craig ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elec

[Elecraft] FS: KAF2

I have a built KAF2 audio filter module for a K2 for sale. It works perfectly but is excess to my needs now that I have a dsp module. If you're interested please email me off list. 73, Craig K3OOL K2 4790 ___ Elecraft mailing list Post to: Elecraft@mai

[Elecraft] K2 Power Supply Voltage Range

Is there any advantage (or disadvantage) to running the power supply to a K2 at the upper end of the specified voltage range rather than in the middle or the low end. I'm thinking of more output power, or same power at lower current, etc. I'm not trying to 'hot rod' the PA of the K2, just wonderi

[Elecraft] WTB: KAT2

here or at K3OOL at yahoo.com. 73, Craig Miller K2 4790 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elec

[Elecraft] K2 Test/Oper Quirk

can then turn it off with the VOX button and then switch back to SSB and all is well. Is this normal? I believe I have the latest firmware that came with #4790. Thanks for any suggestions. Craig Miller K3OOL ___ Elecraft mailing list Post to: Elecraf

[Elecraft] K2 #4790 is on the air.

Just finished K2 4790 tonight. No problems in construction or alignment. It all seems to work per spec with the alignment by the book just using antenna noise and zerobeating WWV and/or CHU to check the accuracy of the VFO. One quick qso in the log with many more to go. My thanks to everyone on

[Elecraft] RE: K2 assembly: tilt bail so tight it warps cover

this will have any long term effect. Anyone at Elecraft notice this? An out of spec batch of tilt bails? Craig Miller, K3OOL K2 4790 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber

Re: [Elecraft] Toroid Pictures

Don, Thanks. I didn't find them there but after I wrote I did the obvious thing and searched my history. The pictures are on the Elecraft site in a file called K2_Toroids.htm. I should look *before* I hit send! 73, Craig K3OOL On Sun, 6 Mar 2005 18:32:35 -0500, W3FPR - Don Wilhelm <[EMAIL P

[Elecraft] Toroid Pictures

be, a life saver during construction. 73, Craig Miller K3OOL K2 SN: (watch this space) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailm

[Elecraft] K2/SSB Construction

ess to a Panavise with about 6" capacity jaws; is this big enough? Any thoughts will be appreciated. Thanks for the help. Craig Miller K3OOL K2 S/N: ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the