K3 manual labels it's outputs Band0 OUT through BAND3 OUT.
What goes where?
Thanks.
Martin, DM4IM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Ele
Elecrafters,
i recently bought a used K3 with Sub RX and KAT3A internal ATU. I've
enjoyed Diversity via SUB RX on my older K3, but never had the bells and
whistles of the ATU.
So with -say- a vertical Antenna attached to Ant1 and a Dipole to Ant2,
i can receive Diversity (if distance between th
a non-Elecraft rig, i can work with the
transverter .
HW?
--
73,
Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
00 as well - i don't have cw-skimmer on _this_ pc )
is a good starting point, but that seems to be _far_ off.
Any one?
--
73,
Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
should be named
serenum.sys and ser?pl.*
where ? is one more letters/figures and * is for .sys .inf .vxd.
The files should be in the windows\system32\drivers folder.
They are a few tens of kilobyte in size.
I'm not sure if i have any advantage with USB 2.0,
but heck....
l
--
73,
Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
e K3DSPLPF recently.
Anyone experience this?
Radio is K3 # 2878
SUB RX
Utility is the latest Linux version.
Real serial connection (ttyS0), no USB.
--
73,
Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
OFF. All ok now.
Wew!
K3Utility is the Linux version.
I am listening to 5R8X on 80m with the APF and am VERY impressed.
Thanks Elecraft.
--
73,
Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
retune it AND will it work with a K3 /
KXV3A ?
--
73,
Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
? Do i miss something?
--
73,
Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Gentlemen,
thanks for all info. Great list.
--
73,
Martin DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
wrong blah blah.
Are they really no longer shipped with the pins or do these german
dealers sell asia-made copies?
I could have asked Wayne at his booth, but he had a lot of traffic.
--
73,
Martin DM4iM
__
Elecraft mailing list
Home
Elecrafters,
thanks for all the input.
So far, the preamp does a good job, now stations are readable i
don't even hear with the preamp off.
Cu on the Magic Band.
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qt
I should have added that the cable used is H100, about 30m long
and has an attenuation of 2.8 db per 100m on 50Mhz.
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
performance, but i'm not sure.
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Thanks Elecrafters,
all questions answered.
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Elecrafters,
how can i make a K3 transmit outside the ham bands?
I have a non-elecraft transverter covering 430-440 Mhz, i need to RX &
TX from 20-30Mhz. I guess i will also need the general coverage filter?
Martin
--
73, D
QRP is not an identifier or part of a call so IMO signing /qrp is incorrect.
When i go qrp i sign DM4IM QRP or DM4IM/P QRP when portable, but never
ever DM4IM/QRP. If someone qso's me and signs CALL/QRP i sure answer his
call, but i never key the / , because qrp is not part of his call .
/
Ok, my fault. I wasn't aware that i need to set the tone-frequency as
well. I thought that pushing the button will do it.
So the subaudible tones are sent out by the push of the button? Not
continuously?
Martin
Danke, Detlef.
--
73,
i hear a faint thump when holding PITCH.
Did i miss something?
PL DEV is 0.36
FW is latest beta
FM-Filter
K3 #28something (duh! forgot the ser-nr.)
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
it's antenna jack, bad
things can happen if you forget to switch the supply off, when you
change antennas, switch to your dummyload, you name it.
So it is a big NONO.
Martin
--
73 , DM4iM
__
Elecraft mailing list
Home: http://mailm
Elecrafters,
this might be a rig-killer and vy stupid, but
Can i power a 6m masthead-preamp by feeding dc via choke and coupling
C's to the KXV3A's in/out sockets (where the elecraft preamp is supposed
to sit), or is this a big NONO?
Martin
--
Thanks folks.
I've overseen the Info on the Mods & Application page.
All questions answered.
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/
r the pond (if the icelandic volcano permits).
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list h
Elecrafters,
i'm in the process of making a cable for the K3's ACC-socket.
I 'm not sure how to correctly connect to ground.
There is a Pin labeled ground, should i solder it to the shield?
Should i solder the shield to the shell of the plug?
If yes, both ends?
Martin
en it goes to a closed circuit condition.
> So yes, the K3 pulls this pin to ground during transmit, and it should
> work well for keying a transverter.
>
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
What does this Pin exactly do? Pull to Ground or deliver a voltage?
I need to key a Transverter (non-Elecraft).
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
. 100watts -> milliwatts
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.
? I can't speak for other modes, i haven't tried
yet.
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth
r the black wire to the
ground ring. Red wire to tip and white wire to the middle ring, or vice
versa, depending on which side you like to have the "right" channel AND
on which side you like to have the cord.
You'll be rewarded with plenty of audio and good sound.
Ma
ll bands except 6 meters.
>
> 73,
>
> Lyle KK7P
>
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Thi
stening to higher bands.
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://w
Don, W3FPR, was fastest as usual :-)
Problem solved, thanks.
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
Elecrafters,
thanks a lot for all the input.
Not only did we discuss the filters, we also discussed on shift, width
and passband-tuning.
The different approaches to eliminate qrm *and* keep the signals
readable were very informative.
I learned a lot.
HNY
Martin
--
73, DM4iM
same,
so the criteria here is performance.
May i call for a run-off?
Thanks to all es HNY
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I built K2/10 #2706 back in ... was it 2001?.
I operate the K2 portable now and then, it is a joy to use.
In early 2009, i built K3/100 #2878, it replaced my trusty TS-850.
Happy Holidays
Martin
--
73, DM4iM
__
Elecraft mailing list
more readable the closer you get to 5, the default.
The signal stands out, even though the noise is higher.
YMMV
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
artin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this
-firmware, e.g. k3fw3rxx.zip.
Drag and drop it to your local folder, Fire FTP will download it.
Right-click on the downloaded file, select OPEN and expand it to your
firmware-folder . Close Firefox and start K3-Utility.
Voila.
Martin
--
73, DM4iM
_
t 100 W than at 13 W. But accuracy should still be reasonable
> even in the lower end of the range.
>
> Your external bridge may have better sensitivity at the particular power
> range you were using.
>
> 73,
> Wayne
> N6KR
--
73, DM4iM
___
e external meter, while the readout on the K3's display stays
unchanged.
I posted this to the list some weeks ago, but nobody noticed.
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
-Audio won't come
on for about 1/2 second after message has finished.
Let the message play nearly to its end, then tap: RX-Audio won't come on
for even longer (felt like this).
Martin
--
73, DM4iM
__
Elecraft mailing list
os to the transceiver. Let's
see...
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hoste
Guys, found all the info i need.
Thanks.
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by
er K3.
How to route the antennas?
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
ily can return to their announced qsx-freq.
>>
>> Sorry for the bandwidth if there is already a method to accomplish this
>> in a similar way. I must have missed it then.
>>
>> Martin
>>
--
73, DM4iM
__
E
Wayne Burdick schrieb:
> Just turn off CONFIG:VFO OFS so the offset control can't change the VFO
> frequency.
>
> 73,
> Wayne
>
>
This is it! Thanks.
Martin
--
73, DM4iM
__
Elecraft mailing list
Ho
do to prevent this?
What did i miss?
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
recording? (makes no sense)
4. Is recorded rx-audio routed through tx-eq when played back? (makes no
sense)
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
I once owned a FT-107, it had APF, i sure miss that feature.
If you are looking for a good analog Audio-filter, go to
http://www.eurofrequence.de/filtereing/
I own the predecessor with less features for more than 15 years.
I am a satisfied customer, no other relationship.
Martin
--
73, DM4iM
your input on this because i run a tube amp and Tuner. The
lowest swr possible helps the tuner & amp to stay cool -and the owner.
The external Meter is hooked between the K3 and the amp.
Martin
--
73, DM4iM
__
Elecraft mailing list
Elecrafters,
to connect the K3 to a SteppIR Antenna-Controller, what cable do i need?
The K3 is already connected to a computer via the serial port.
Do i need 2 normal RS232-cables where one cable plugs in the K3 <>
controller and the other one in the controller < > pc?
Martin
--
Additionally installing curl, running
sudo apt-get install curl
in a terminal solved the problem.
Thank you David, W4SMT, for the super fast response.
Martin
--
73, DM4iM
K2 #2706, K3 #2878
__
Elecraft mailing list
Home: http
update
the firmware if i want to, just not automated.
I have Ubuntu 8.04.
Comments?
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailt
of Elecraft-support.
Note: Don't build when you are tired.
:-)
Martin
--
73, DM4iM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Ele
& 400hz filter in position FL 2 & 3 , so even if i counted the
positions backwards , one of them should work.
So, what can i do? Can i swap some connections to pin down the defective
board?
--
73, DM4iM
__
Elecraft mailing list
Ho
ittle better than
before due to the 3-db increase because the antenna now is not shared
with main rx.
C: I also hooked the 2nd cable to RX-IN and selected RX-Ant, but same
performance as B.
What am i missing?
Martin
--
73, DM4iM
__
Ele
ssb/cw on both rx's , *no* KAT3.
Where to begin the troubleshooting?
Martin
--
73, DM4iM
K2 #2706 , K3 #2878
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
it, it was late.
Martin
--
73, DM4iM
K2 #2706 , K3 #2878 (soon to be on air)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
and KPA100.
Maybe this behavior is normal until everything is installed? Should i
proceed assembling or troubeleshoot now?
Going to bed now, it is 01:16 local.
--
73, DM4iM
K2/10 #2706 , K3/100 #2878
__
Elecraft mailing list
Home: http
Install Serial Port Terminal , this software can setup your serial
ports using a GUI. It also features a terminal.
If you intend to use the commandline,
install a programm to communicate with the ports:
sudo apt-get install setserial
then tryman setserial
Martin
HNY
--
73, DM4iM
K2
itself is ok, but the received signal is not amplified by the stages
after the rx.
Also, the K3 fails to transmit.
Any comments?
--
73, DM4iM
K2 #2706
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
the KANT3-board.
The RX sounds like there is no antenna connected, there is noise, but no
signals. Help!
Martin
--
73, DM4iM
K2 #2706
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
64 matches
Mail list logo