from my iPhone
On Feb 13, 2017, at 21:23, Eric Swartz - WA6HHQ, Elecraft
wrote:
Folks, I just returned from 5 days on the road for the Orlando Hamcation
hamfest and saw this huge thread. As per list guidelines, please self moderate
(i.e. - End) OT threads like this after 5-10 posts. Please do
Folks, I just returned from 5 days on the road for the Orlando Hamcation
hamfest and saw this huge thread. As per list guidelines, please self moderate
(i.e. - End) OT threads like this after 5-10 posts. Please do not wait for me
to jump in.
Lets end the thread at this time - this topic has cer
Hi Gil,
Make sure you have not accidentally put it in bypass mode. That is the most
common mistake made on the T1.
73,
Eric
elecraft.com
_..._
> On Feb 5, 2017, at 8:39 AM, Gil via Elecraft wrote:
>
> Hello,
>
> My T1 doesn't tune anymore. I built it only a few weeks ago. It used to
> wor
We've just completed our "What would you do with a KX2?" joint contest with
K6UDA. Here are the winning videos that won a KX2. Pretty cool!
See:
https://youtu.be/xlDQu9GbbbY
73,
Eric
/elecraft.com/
__
Elecraft mailing list
Home: http:/
yes. No problem.
73,
Eric
/elecraft.com/
On 2/1/2017 5:20 PM, Allen Bush via Elecraft wrote:
Will a KAT3 (non-a) work fine with a new K3S? (Knowing that it doesn't have
a bypass relay)
Allen, W0OUU
__
Elecraft mailing list
Home: htt
Hi Everyone - This thread was closed earlier this week.
73
Eric
List moderator etc.
/elecraft.com/
On 2/1/2017 4:25 PM, Kevin wrote:
It's been that way with PC's and Mac's for 15 years.
Your PC is not truly "off" when you hit the power switch. That is the ATX
specification. To start a PC all
Guys - this is getting beat to death and to be honest, a few of the comments
have strayed outside of our 'keep it respectful' list guidelines.
Let's close the thread at this time.
73,
Eric
/elecraft.com/
__
Elecraft mailing list
Home:
For the speaker output, the K3 and K3S are optimized for 4 ohms. The SP3 is a 4
ohm speaker.
8 Ohm speakers work fine, but a a slightly lower audio output for the same
volume control position.
Eric
/elecraft.com/
On 1/23/2017 9:00 AM, Joe W2KJ wrote:
Howdy Gang:
Checked the KX3 manual but
And we are seeing no problems here with the website. I agree - check your local
PC for something infecting Chrome.
73,
Eric
/elecraft.com/
On 1/3/2017 9:26 AM, Jerry Moore wrote:
Works for me in Chrome, IE, and Edge, all latest version/patch
-Original Message-
From: Elecraft [mailto:e
Countdown to 2017! Don't miss out on the K3S Bundle Offer - It ends on December
31. (end of day)
For details, see: http://www.elecraft.com/K3sBundleSale.htm and also the K3S
section of our order form.
73,
Eric
/elecraft.com/
__
El
Folks, we have not ever formally said we would never do a 1500W amp. We have
said at times in the past that we were not doing one at that time, but we never
rule anything out.
We're always looking for good suggestions and marketing input on what we should
do in the future.
73,
Eric
/elecraft
Date Correction: Monday and Tuesday 12/26-7.
Eric
/elecraft.com/
On 12/27/2016 9:37 AM, Eric Swartz - WA6HHQ, Elecraft wrote:
The Elecraft HQ office is closed Monday and Tuesday (12/27-8) for the holiday.
We will be back in the office and on the phones and email tomorrow, Wed, 12/28.
We hope
The Elecraft HQ office is closed Monday and Tuesday (12/27-8) for the holiday.
We will be back in the office and on the phones and email tomorrow, Wed, 12/28.
We hope you all are having a great holiday!
73,
Eric
/elecraft.com/
__
Elec
Scott from SideKX also has a very nice mobile mount that the KX2 just snaps
into. It in turn has holes for the very popular AMP mounting solutions.
I'm using this with a KX2 to drive a KXPA100 in my RAV4 (the one Bill, AE6JV -
the O.P. passed on the road that made him think about mobile op's :
As of 12:25 PM PDT (CA time) our phones are back on line.
Early this morning there was an area wide power failure that caused problems
both with our company phone connection and internet service.
We apologize for the missed calls!
73,
Eric
/elecraft.com/
_
Midnight PST tonight (Monday) Calif. time.
73,
Eric
/elecraft.com/
On 11/26/2016 8:13 AM, Grady Harper via Elecraft wrote:
When does the sale end?
AJ4YA
Grady
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/ele
Folks, direct attacks on others are way outside of the Elecraft list guidelines.
Please keep it civil.
73,
Eric
elecraft.com
_..._
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman
iday Special? Thanks Jim K4JAF
>
> -Original Message- From: Eric Swartz - WA6HHQ, Elecraft
> Sent: Thursday, November 24, 2016 11:27 AM
> To: Elecraft Reflector Reflector
> Subject: [Elecraft] Elecraft Black Friday & Weekend Sale
>
> We'll, we have finally
John,
Nice catch. Typo fixed!
(anwhere --> anywhere)
73,
Eric
elecraft.com
_..._
> On Nov 24, 2016, at 6:06 PM, wrote:
>
> I think that they will adjust your shipping charge when your order is
> processed. The following is shown on the Elecraft website under Black Friday
> Sale: "Free Gro
Hi Mike,
We noted with the Black Friday and K3S Bundle specials on the order form that
those items would get free ground shipping to North America and that we would
adjust out the shipping for those items when the order came in. (We do not
charge the credit cards until we double check the order
We'll, we have finally given in to the Black Friday Sale hysteria.. ;-)
The Elecraft Black Friday Sale begins 11/24/16 (today) and ends at midnight
(PST) on Monday night, 11/28/16.
You can get the details at:
http://www.elecraft.com/BlackFridaySale.htm
Our order form also has the K3S Bundle s
If the KPOD is causing this due to static discharge, reverse ends on the
direction of the cable connecting it to the K3S or K3. The wire to pin one of
our supplied cable is supposed to be cut, but it is possible there is one end
with a wire still making the connection. (If you are supplying your
Let's wind down and end this OT thread in the interest of controlling email
overload for other list readers. (We're now at 35 posts..)
73,
Eric
/elecraft.com
List Moderator etc.
/
On 11/1/2016 11:32 AM, Fred Jensen wrote:
Los Angeles, early 1953: They used a 2-hole tape reader. Big thing, smel
Guys, let's take the dBc discussion off list.
73,
Eric
Mooderator
/elecraft.com/
On 10/19/2016 6:35 AM, Joe Subich, W4TV wrote:
On 10/19/2016 2:11 AM, Jim Brown wrote:
The "carrier" reference for other modulation is the peak of the
envelope.
Which means your dBc references should be labelle
- Original Message -
From: "Eric Swartz - WA6HHQ, Elecraft"
To: "Jim Rogers" , "elecraft"
Sent: Tuesday, October 18, 2016 2:10:17 PM
Subject: Re: [Elecraft] K3S QST Article
Hi Jim - The 17 m harmonic problem was limited to the single review unit, which
we correcte
Hi Jim - The 17 m harmonic problem was limited to the single review unit, which
we corrected. All others shipped were/are OK on 17M.
73,
Eric
/elecraft.com/
On 10/18/2016 11:38 AM, Jim Rogers wrote:
To all who responded, certainly my friend Don and others
"During initial testing, we foun
Note - if your posts are not coming through with their text, that usually means
you are sending in HTML format only. The list server strips HTML in order to
keep the digests readable.
Posts should be in plain unformatted text. (no fonts, bold etc. )
Some browsers will send both HTML and plai
Cut and paste got me - corrected text below.
On 10/12/2016 3:55 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
In the interest of reducing list email overload for others, let's wind down
the OT 'PL-259' posts now and close the thread.
73,
Eric
/Moderator at large, elecraft.com/
O
In the interest of reducing list email overload for others, let's wind down the
OT 'Windows Emulator' posts now and close the thread.
73,
Eric
/Moderator at large, elecraft.com/
On 10/12/2016 11:05 AM, Jim Brown wrote:
The Amphenol part number is 83-1SP (with nothing after that part number) for
In the interest of reducing list email overload for others, let's wind down the
OT 'Windows Emulator' posts and close the thread within an hour of this post.
(Its now 2249 Z)
Eric
/elecraft.com/
On 10/12/2016 2:02 PM, Phil Wheeler wrote:
Same here, Eric. And my clock is always OK when rebooti
Oops! My last email on this thread was just meant for Wayne :-)
73,
Eric
/elecraft.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailma
Wayne, is the needed k-pod f/w mentioned below released? If not, we need to get
this out immediately.
Eric
/elecraft.com/
On 9/25/2016 11:54 AM, Cady, Fred wrote:
Thanks Wayne. Paul sent it to me.
Cheers,
Fred
From: Wayne Burdick
Sent: Saturday, September
And one more talk.. (We're busy this month!)
I will be talking at the Northern California DX Club meeting tonight (9/15) in
Cupertino, CA.
See: http://www.ncdxc.org/
73,
Eric
/elecraft.com/
On 9/14/2016 11:59 AM, David Shoaf wrote:
In addition to Wayne's talk at the San Mateo club th
I see the recurring APP thread has once again raised its head and has again
been beaten to death.. :-)
Let's end the thread at this time, due to the very large number of posts on
this topic, and the fact that exactly the same info is available in the
archives from multiple past threads.
Must
Folks - while this is an important topic, further discussion is outside of the
content guidelines for the Elecraft list. Its ok to post the initial comment,
but discussion of pro-con items should always proceed elsewhere in order to
keep our focus on Elecraft related topics and closely related O
Hi Jim,
Actually this software was written by Brandon, KG6YPI, who works here in our
engineering group. I've forwarded your email to him.
73,
Eric
/elecraft.com/
On 8/16/2016 2:21 PM, Jim Cary wrote:
I have downloaded the above software from the Elecraft website to remotely
control my KAT5
The KPAK3AUX cable also switches the KPA500 band prior to transmit when you
change bands on the K3/K3S. If the cable is not present, the amp will still
change bands instantly upon transmission from any rig by measuring the
frequency, including the K3/K3S. Either method works well.
The KPAK3AUX
And with that, let's close this thread. Its a bit too far OT.
Must be a slow HF propagation day! ;-)
73
Eric
Your moderator, really!
/elecraft.com/
On 8/12/2016 11:42 AM, Phil Wheeler wrote:
A fun retrospective, Jim -- except for the corn part!
Phil W7OX
On 8/11/16 10:29 AM, Jim Brown wrote
Folks, let's wind down and close this thread. We are at 14 posts on an OT thread
in a short time, well in excess of our list soft limit. As I noted earlier,
please keep these OT threads short and sweet.
While we do not prohibit OT topics, please self moderate as the primary focus of
this list
We're at 27 posts on this topic since this morning. Time to close the thread as
we are well exceeding the single topic limit.
Please try to self moderate a bit more. 5-10 posts on most topics is more than
enough and helps relieve email overload for others.
73,
Eric
Moderator etc.
/elecraft.c
We're at 17 postings today on the OT Heathkit topic - exceeding the normal OT
limit.
In the interest of relieving email overload for the majority of our readers, the
thread is now closed.
73,
Eric
Moderator
/elecraft.com/
On 8/8/2016 12:51 PM, Ken G Kopp wrote:
Folks, I'm just the messenge
Hi David,
Not at this time.
73,
Eric
/elecraft.com/
On 8/8/2016 2:06 PM, David F. Reed wrote:
I suspect this has been asked before, but I don't recall the answer...
I note that I really enjoy the TX monitor aspects of my P3; however I miss it
on the external VGA display.
Is there any way
Folks - This way OT topic was closed over 2 hours ago.
Please, no more posts on the email/Spam filtering topic.
73,
Eric
Moderator
/elecraft.com/
On 8/8/2016 2:12 PM, Lynn W. Taylor, WB6UUT wrote:
Speaking as someone who provided E-Mail services for a couple of decades, NO.
It's not the provi
To clarify, I'm referring to the thread complaining about the anti-spam system
used by the original requester, not his original post, which was OK.
Eric
/elecraft.com/
On 8/8/2016 12:10 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Folks - Way too OT. Please take this off list.
In general,
Folks - Way too OT. Please take this off list.
In general, this is something that should have gone to direct email immediately
and not tied up the list with email..
Thread closed.
73,
Eric
Moderator
/elecraft.com/
On 8/8/2016 11:55 AM, Joe Subich, W4TV wrote:
> How could he anticipate that
End of thread. (and related G5RV threads under similar subject lines..)
We are now at 27 G5RV posts in less than 24 hours, several time the limit for OT
posts. In the interest of relieving email overload for Elecraft focused readers
and others, please take further discussion off list.
(Pleas
End of thread.
We are now at 27 G5RV posts in less than 24 hours, several time the limit for OT
posts. In the interest of relieving email overload for Elecraft focused readers
and others, please take further discussion off list.
(Please self moderate in the future and end these OT threads w
, Gerry leary wrote:
What is a CS 40 travel bag?
Sent from my iPhone this time
On Aug 4, 2016, at 3:36 PM, Tom Francis wrote:
Will do - thank you.
Tom, W1TEF
On 8/4/2016 5:27 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Hi Tom - Before shipping the paddle, please make sure first to contact our
Hi Tom - Before shipping the paddle, please make sure first to contact our
support team via supp...@elecraft.com or on the phone to get a return Service
Authorization (RSA) tracking number, return instructions and our correct return
shipping address information.
That will speed its repair and
Folks - End of thread(again) in the interest of keeping list volume reasonable
for our readers..
We ended this and the other 1500 W Amplifier threads yesterday.
If and when we decide to do a higher power amp designed to our standards, we'll
let everyone here know first. :-)
73,
Eric
Moderat
Folks, The 1500W threads were closed many hours ago due to their high volume.
Please take the discussion off list for now.
73,
Eric
Moderator
elecraft.com
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
This version of the 1500W thread is also now closed, along with any other
variants we haven't seen.
73,
Eric
Moderator
elecraft.com
Never say 'never'
_..._
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecr
This version of the 1500W thread is also now closed.
73,
Eric
-- --- -.. . .-. .- - --- .-.
elecraft.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Po
Folks, let's end this thread at this time.
It has reoccurred periodically many times in the past and can easily be perused
in our archives.
73,
Eric
Moderator
elecraft.com
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mai
We are well past the single topic posting limit on this thread.
Let's close the thread for now in the interest of relieving email overload for
our other readers.
73,
Eric
Moderator (from wherever I may be..)
elecraft.com
_..._
> On Aug 1, 2016, at 1:08 PM, Ken Arck wrote:
>
> As those of u
Looks like we have beaten this one to death. ;-) Time to end the thread.
In general, please self moderate (limiting the number of posts on a topic) and
do not wait for me to jump in, as I can get busy or may be out of town when
these long threads occur.
73,
Eric
Moderator (hopefully not fo
Guys, thread was closed earlier. Please take it off list.
73,
Eric
Moderator, really!
elecraft.com
_..._
> On Jul 26, 2016, at 6:33 PM, Ron D'Eau Claire wrote:
>
> Hams are people. Some people are dishonest.
>
> However, to judge whether a contact is honest or not cannot be made on the
> ba
Guys - This is a little too OT. Let's close the thread and take this off-list.
73,
Eric
Moderator etc.
/elecraft.com/
On 7/25/2016 6:41 PM, Jim Brown wrote:
On Mon,7/25/2016 6:12 PM, Wes Stewart wrote:
"Sorry, but some folks aren't ethical. :) " We're supposed to avoid politics
here.
Why
Actually, the correct name for the DVR option on the K3 and K3S is, drum roll..
'KDVR3' (not K3DVR) .
As noted by several other KDVR3 users, if the recording audio starts immediately
after pressing the button to start recording, and ended immediately after the
audio stops by pressing the butt
We are at 14 posts on Deoxit(tm) and this topic has been pretty much beaten to
death ;-)
Let's close the thread at this time in the interest of reducing email overload
for others.
73,
Eric
Mooderator
/elecraft.com/
On 7/19/2016 8:12 PM, Ron D'Eau Claire wrote:
Quite so. I used deoxit i
Not at this time. It takes a bit of work to get it there, so we can't promise
it near term.
73,
Eric
/elecraft.com/
On 7/19/2016 4:33 PM, Mike Murray wrote:
Does the K-pod work with the K3/0 mini in remote operations?
Mike W0AG
_
Hi Bret,
We install the internal options here at ship time if they are ordered with the
KX2.
73,
Eric
/elecraft.com/
On 7/18/2016 3:25 PM, MaverickNH wrote:
I just put in a order for a KX2 with ATU & clock. Does Elecraft install them
or is that my job?
Bret/KC1CJN
___
The K-Pod manual is already on the manual download page. See:
http://www.elecraft.com/K2_Manual_Download_Page.htm#kpod
You may need to refresh your browser page to see the kpod entry in that page's
table of contents.
73,
Eric
/elecraft.com/
On 7/8/2016 4:49 PM, Ron D'Eau Claire wrote:
Tnx Ph
If you are a QST subscriber, check out the great picture of the KX2 and WG0AT
operating above 14,000 ft on the cover of this months QST!
http://www.nxtbook.com/nxtbooks/arrl/qst_201608/
73,
Eric
/elecraft.com/
__
Elecraft mailing lis
Elecraft eMail LIST GUIDELINES 2016
For those of you who are new to the list, (and for those of us who have rapidly
failing memories) here is a quick list of things to remember when posting to
this list. Please save this for future reference.
The most important thing to remember is that this
*** IMPORTANT - PLEASE KEEP ALL POSTINGS CORDIAL ***
Restrain the urge to email someone admonishing them about a posting. The last
thing we want to do is to scare anyone off the list. Overly aggressive postings,
arguments and negative comments about other posters only serve to scare away new
p
Hi Arnie,
We are shipping KXPD2s starting today.
See my post to this list (about 20 minutes prior to your post below) with more
status details.
We are updating the status page with the same info right now.
73,
Eric
/elecraft.com/
On 7/7/2016 9:08 AM, Arnie Grubbs via Elecraft wrote:
Just
We are shipping the first KXPD2 paddles today! (Mostly Dayton orders shipping
this week and next.)
Please hold off emailing sales for your KXPD2 order status - we are getting
overloaded with status request emails. We will post a more detailed shipping
status with order data vs ship date next
Workin' on it. We have to do the Windows version first and then translate it to
Mac and Linux.. That takes several weeks more.
Eric
/elecraft.com/
On 7/5/2016 3:54 PM, Elliott Lawrence wrote:
No support for Mac yet??
Elliott WA6TLA
On Jul 5, 2016, at 3:40 PM, Eric Swartz - WA6HHQ, Ele
Version 1.16.6.25 of the K3 Utility, which adds additional support for macros
used by the K-Pod, is now up on the web page at:
http://www.elecraft.com/K3/k3_software.htm#k3util
73,
Eric
/elecraft.com/
__
Elecraft mailing list
Home: ht
We had a minor production glitch last week and are awaiting delivery of a part
for the KXPD2 today or tomorrow. We should begin shipping KXPD2s against the
backlog later this week. I'll update the status page to reflect this.
73,
Eric
/elecraft.com/
===
On 7/5/2016 7:05 AM, David F. Reed wrote
Hopefully tomorrow!
73,
Eric
/elecraft.com/
On 7/4/2016 12:19 PM, Tom Morehouse wrote:
Received my KPOD on Thursday, but just hooked it up today. First item: you
must have beta firmware 5.50 installed for it to work. item two: manual
states that you must have K3 Utility Program rev 1.16.3
Folks, lets end this thread in the interest of relieving email overload for
others.
73,
Eric
Moderator etc.
/elecraft.com/
On 7/4/2016 6:34 PM, Gary wrote:
Some ops like bassy audio, it is really tough to understand the audio due to my
damaged hearing so I don't call, added to ESSB further e
We should start shipping our backlog later this week. We are building them in
production and are just waiting release of the K-Pod utility for f/w updates.
It will take several weeks to ship everything on the backlog.
73,
Eric
/elecraft.com/
On 6/28/2016 11:13 AM, Bill wrote:
The site info ind
Folks - abusive mail, snide remarks etc sent to list members is in direct
violation of list policy.
If anyone receives a negative posting, please send it to me and I will discuss
it strongly with the sender.
73,
Eric
/List moderator - elecraft.com/
On 6/28/2016 1:26 PM, Bill wrote:
I have r
Our Web order entry system always sends an immediate email confirmation. Ron
was probably noting that we do not normally send a second one manually.
We usually also send an automated email with a tracking number when we ship via
UPS.
If you do not receive a quick confirmation email when placing
I believe Scott at GEMS Products has a new plastics vendor.
Scott has great products and a great company.
73,
Eric
elecraft.com
_..._
> On Jun 22, 2016, at 8:28 PM, Howard Hoyt wrote:
>
> Hi all,
>
> GEMS Products is a great company to do business with, but I spoke with them
> at Dayton,
Let's end this recurring thread for now in the interest of relieving email
topic overload for others :-)
Its well exceeding our single OT posting limit and has a wealth of past posts
on this topic in our nabble archives etc.
73,
Eric (a.k.a. Mr. Moderator)
elecraft.com
---
Sent from my iPhone
Hi Peter,
Your KXPA100 order shipped to you on 6/15 California time, two days after your
order. If you have further questions on your order, please email
made...@elecraft.com and we will quickly help you.
73,
Eric
/elecraft.com/
On 6/17/2016 10:36 AM, Peter Pauly wrote:
I ordered a KXPA100
Bill,
Call our support guys first thing Monday.
73,
Eric
elecraft.com
_..._
> On Jun 19, 2016, at 6:14 AM, Bill Steffey NY9H wrote:
>
> k3 sn 22xx loaded option wise ( no 2mtr)
>
> last week vfo did not move receiver ??...
> and heard no sigs till after i changed bands and back///
Current KX2 shipping Status:
Ordered through 5/27: Ships 6/17-6/21
Ordered 5/28-29: Ships 6/21-6/22
Ordered 5/30-6/1: Ships 6/22-6/23
Ordered 6/2-6/3: Ships 6/23-24
Ordered 6/4-6/5: Ships 6/24-27
For the latest KX2 shipping status, the best place to go is our shipping status
p
Hi Joe,
I apologize, but we are totally booked on other projects and do not see that
happening in the near future.
73,
Eric
/elecraft.com/
On 6/15/2016 4:31 PM, Joe Stone (KF5WBO) wrote:
I see Elecraft just removed the "June 15, 2016" date from the K-Pod page,
http://www.elecraft.com/
Check the connections on the BNC cable between your K3 and P3 and re-seat them.
Also, if you have an extra BNC-BNC cable, try replacing this cable.
Also, if this BNC is run near switching power supplies etc. it can pick up noise
like this.
73,
Eric
/elecraft.com/
On 6/8/2016 7:22 AM, Sam Mor
One other note - we are receiving so many sales calls and emails right now that
there can be up to a business day or two for some replies.
73,
Eric
/elecraft.com/
On 6/7/2016 2:48 PM, Kevin - K4VD wrote:
Randy...
How were you told? I have been waiting for any kind of confirmation that
the co
Hi Kevin,
I just checked our system, and I show that your order has been entered for a KX3
and accessories. It should ship in the next 4-7 business days.
If you placed your order on-line, you should have received an automated
confirmation with an order number. (Check your Spam folder just in
Hi everyone,
Its been a busy last couple of weeks at Elecraft! We are still recovering from
Dayton and are working on entering all of the latest KX2 web orders .
At the moment we are overloaded by all the email requests for KX2 order status
(some just a couple of days after order.) This in tu
Hi everyone,
Its been a busy last couple of weeks at Elecraft! We are still recovering from
Dayton and are working on entering all of the latest KX2 web orders .
At the moment we are overloaded by all the email requests for KX2 order status
(some just a couple of days after order.) This in tu
Its edited to show each person who called him for a QSO, with the rest in
between chopped out. He worked each of those stations.
Eric
/elecraft.com/
On 5/28/2016 5:38 PM, Wes Stewart wrote:
Wow. W7CNL, N8BB, W9RH and NE4TN answer his CQ and he calls QRZ?
On 5/28/2016 5:13 PM, Eric Swartz
Here is a new KX2 video of SOTA operation from K0JQZ. It also includes a short
unboxing at the beginning. See:
https://www.youtube.com/watch?v=Mc79PMWJ6_o&feature=youtu.be
Great shots of him and WG0AT!
73,
Eric
/elecraft.com/
__
Elec
RX-I/Q.
Eric
/elecraft.com/
On 5/26/2016 1:15 PM, wickedbeernut wrote:
I am looking to purchase one of the KX2's field tested by Rob/W3DX (S/N
0005), Steve/wGØAT (S/N 0006), Joe/N9JR (S/N 0007), Fred/KT5X (S/N 0009),
... which had RX I/Q.
Please contact me off list.
Joe Stone
KF5WBO
None of those FT units had RX I/O outputs.
73,
Eric
/elecraft.com/
On 5/26/2016 1:15 PM, wickedbeernut wrote:
I am looking to purchase one of the KX2's field tested by Rob/W3DX (S/N
0005), Steve/wGØAT (S/N 0006), Joe/N9JR (S/N 0007), Fred/KT5X (S/N 0009),
... which had RX I/Q.
Please contact
Guys - we are drifting way OT. Lets end this thread at this time.
73,
Eric
/elecraft.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mai
Absolutely!
I'll personally be there too.
73,
Eric ( in the air coming back from Dayton)
elecraft.com
---
Sent from my iPhone 6S
> On May 23, 2016, at 10:06 AM, Phil Hystad wrote:
>
> Eric or Wayne:
>
> I assume that there will be a KX2 or two to see, hold, handle, touch,
> spindle, and f
Great info. :-)
Now that the OPs question is answered, let's close the thread now in the
interest of containing email overload for our other readers.
73,
Eric (in the air heading to Dayton..)
Moderator
elecraft.com
_..._
> On May 18, 2016, at 9:56 AM, w9hak wrote:
>
> Thanks to all that repl
We had a serious phone system problem this morning and just now got our phone
system back on-line. If you called today or over the weekend and did not get an
answer, or if you left a message and did not receive a call back, please call in
again.
We apologize for the inconvenience. We are watch
Folks - Let's take this OT thread off-list.
73,
Eric
Modulator
/elecraft.com/
On 5/10/2016 4:19 PM, Lynn W. Taylor, WB6UUT wrote:
The key phrase is "posing as" -- a successful scan always requires some small
amount of truth.
Also "there is a scammer on the internet" is not news. There have
Folks - due to the large number of posts on this topic, let's end the thread at
this time to give our other readers a rest.
73,
Eric
Moderator
/elecraft.com/
On 5/9/2016 3:10 PM, Lynn W. Taylor, WB6UUT wrote:
On 5/9/2016 10:03 AM, Jim Brown wrote:
At audio levels, the shielding from twi
Is the K3 ATU in bypass?
Eric
/elecraft.com/
On 5/6/2016 11:26 AM, Don Wilhelm wrote:
Ramon,
There is a calibration procedure in the manual to calibrate the wattmeter for
forward power, but not for SWR.
I suggest you contact K3support for further assistance.
73,
Don W3FPR
On 5/6/2016 11:50
Please read my last posting. Its -strongly- outside of list guidelines to make
postings of the type below telling people what they should, or should not, be
posting.
Eric
Moderator, really!
/elecraft.com/
On 5/3/2016 12:39 PM, GRANT YOUNGMAN wrote:
Come on guys. Can we stop the “mine is bigg
ottle washer and COO
/elecraft.com/
===
On 5/2/2016 10:23 AM, Eric Swartz - WA6HHQ, Elecraft wrote:
Folks - Its within list guidelines for -short- discussions on topics only
peripherally related to Elecraft topics, but extended discussions pro/con etc
on competition etc should be limited here to
301 - 400 of 2742 matches
Mail list logo