I'm surprised no one has mentioned this...
73 means best regards and is sufficient without an s.
If you say 73s, it is like saying, best regards's.
However, I admit that it has become rather common practice in recent times.
73, Greg-N4CC
Msg sent via CableONE.net MyMail - http
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
What ever happened to the idea of the variable bandwidth filters? Is that a
dead
subject? 73 de Greg-N4CC
Msg sent via CableONE.net MyMail - http://www.cableone.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Looking for $250 + postage for the pair from Jacksonville, FL
area. 73 de Greg-N4CC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
The 6M preamp is now on the order page...just ordered
mine... :-) 73 de Greg-N4CC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
crunching your 1000D
is far greater than crunching the K3 if F=MA is
still true...:-) (OK all you physicists can tell
me why that is incorrect...I'm too old and too
crotchety to care any more.) 73 de Greg-N4CC
At 07:47 AM 9/10/2008, Chris Parnell wrote:
H as funny as that may
I'm using the K3 with a PW-1 and the beauty of it is you don't need
the ALC if you use the K3's capacity to store the power level (drive
level) for each band. Obviously if you use the K3 barefoot at 100
watts you would have to be careful to turn it back down with the amp
but I just leave it
of equipment such as the PW1 at risk by
connecting it to an exciter without a fully-functional ALC loop.
Cheers for now, 73,
Adam VA7OJ/AB4OJ
-Original Message-
From: Greg - N4CC [mailto:[EMAIL PROTECTED]
Sent: 7-Sep-08 19:05
To: Adam Farson
Subject: Re: FW: [Elecraft] K3 and StepIR/Icom PW-1
One more point...why WOULDN'T you load a Beta release? In the very
worst case, you won't like something about it and can always load the
latest public release or reinstall a previously saved
configuration. You can't lose. 73 de Greg-N4CC
Yes...I see that as well...73 de Greg-N4CC
At 01:15 PM 8/29/2008, DC1RS wrote:
When use the filter shift at either USB or LSB and return it to center
frequency it says FC *0.03, sometimes *0.04, *0.05 and *0.40.
All other positions are indicated correct and the received audio also sounds
ok
Didn't realize Heisenluft was on the reflector...It's August ... not
April...but chuckled at both the posts... 73 de Greg
(by the way, my old analog paddle works fine with the K3)
At 09:20 AM 8/8/2008, you wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
Rick -- N8LP's products including LP-Pan. 73 de Greg
At 01:43 AM 6/22/2008, Rick Tavan N6XI wrote:
Please help me with an upcoming article on the K3 in NCJ. I want to mention
some of the third party products that offer explicit support for the K3. I
know about HRD, WinTest, N1MM, Top Ten
Anyone interested in trading an FM filter for a 1.8 khz
filter? Please contact me off line. 73 de Greg-N4CC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
I guess I should have been clearer...I want the FM filter...I have
the 1.8 Khz filter... :-) 73 de Greg
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub,
I received my Lisagram...she said my K3 would likely ship tomorrow --
ordered on July 6. 73 de Greg-N4CC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
on
which to display that beautiful cover ...hi hi...
73 de Greg-N4CC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
before but if it works as well as the customer service, I know I will
be happy. Patience, lad...if you didn't have the anticipation, you
wouldn't appreciate it as much when you do get it. 73 de Greg-N4CC
At 03:28 AM 11/27/2007, David Pratt wrote:
Sadly, Julian, Elecraft's previous good name
across
the carpet and draw a spark from a door knob...so I'm wondering if I
even have to go to the effort...Interested in your thoughts...73 de Greg-N4CC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
http://www.rigcoveralls.net/
At 01:23 PM 11/14/2007, David Ferrington, M0XDF wrote:
I know someone in the US makes custom covers for radios, I even mailed about
a K3 one
I thought the site was http://radiocovers.com/
But looking at the site, I'm not so sure - anyone able to help?
--
Any fool
19 matches
Mail list logo