I had time last night to work on the problem I was having getting CW
Type to key the K-3. I was getting the red transmit light but no RF
going out the wire. VOX was on and the K-3 was not in test mode. I
found that my difficulty is understanding the PTT-KEY menu selections.
I cycled through
Thanks for the info. I'm not at the radio right now but will follow
through on all suggestions.
Greg
KD7SRC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mai
I have the computer connected via the RS-232. HRD is working fine so I
don't suspect anything wrong with the connection. When I send a letter
the red transmit indicator on the K-3 lights as if it were transmitting
but no RF out. VOX is on.
73,
Greg
KD7SRC
Steve Ellington wrote:
> Greg
>
Has anyone successfully gotten CW Type to work with the K-3? I can get
it to send the keying to the K-3 but I'm not getting RF out the door.
73,
Greg KD7SRC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraf
Hey Guys and Gals,
I'll bet the Elecrafters have left at least one thing they have been
working on to be a *suprise* at Dayton. Could it be? :-)
73,
Greg
KD7SRC
wayne burdick wrote:
> Steve Ellington wrote:
>
>
>> There must be a good market for wattmeters these days in spite of the
>> fa
Joe Subich, W4TV wrote:
>
>
> If you don't want the Windows sounds getting from your computer to the radio,
> consider
> one of the interfaces with a dedicated USB soundcard, radio
> control (CAT interface) and other features in one box.
>
>
>
Or just connect up the K-3 directly and tu
I have settled in with my K-3 and see my K2 sitting and gathering dust.
Includes:
K2-100
KSB2
K160RX
KNB2
KAF2
KDSP2
KAT100
QRP top
G3LIV Isoterm cables for data modes
Asking $1,100 for all or make offer. Will not piece out.
Contact off reflector for more details.
73s
Greg
KD7SRC
__
Have a Hakko 808 FS. Has been seldom used. Asking $120. Reply off list.
Thanks,
Greg
KD7SRC
K-2 #3434
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsu
K-2 with KPA100, KAT100, KSB2, 160, AF2, KDSP2, and MH1.
Reply off list to [EMAIL PROTECTED]
Greg Storms
KD7SRC
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
on the bottom of the RF
Board. Check it with an ohmmeter to be certain it is not open. If
you try to do it by measuring the voltage on each side of the choke,
you will find 5 volts on both sides whether it is open or not.
Greg Storms wrote:
I have just started experiencing a tremendous
I have just started experiencing a tremendous distortion on my
transmitted signal (K-2). It was first noticed by a SSB
contact. He said my transmission was strong but nearly unreadable. I
duplicated it at low and high power on a separate receiver.
It occurs on both SSB and CW. This happened r
I'll second this. I have found it the best code learning tool out there and
I have tried them all. Next best is typical QSO words, abbreviations, etc.
converted to morse and ripped to a CD.
Greg Storms
KD7SRC
> Another option, at about $70, is the MFJ-418 Morse Tutor. It produces a
wi
Hi Elecrafters:
I turned the AGC off the other day and was suprised to note a very noticible
increase in audio volume. I had to back the AF gain down by a quarter to a
third turn to get it at a reasonable listening level. I tried this on several
signals and it was the same. It has always se
13 matches
Mail list logo