I recently bought a PX3 to use with my KX3. I have a mini wireless keyboard
that works with it - an old Gearhead Smooth Touch. However, it is on its last
leg - some of the keys don't work really well. It isn't sold anymore.
I need a recommendation for a small, wireless keyboard that will work
I love this handmade stand for my setup from North Ga QRP club -
http://nogaqrp.org/
Hank
K4HYJ
From: John Newgas
Sent: Monday, August 10, 2020 1:09 PM
To: Elecraft@mailman.qth.net
Cc: mongoose1...@googlemail.com
Subject: [Elecraft] re KX3 PX3 desktop stand
Ron Bell Asked :
> Any recommendati
What type of adapter between your surface and your screen? A windows update
stopped mine from working. I use a USB-C to multi port adapter ad I had to buy
a new one after the update.
I have a surface pro laptop.
Hank
K4HYJ
Sent from Mail for Windows 10
From: Nr4c
Sent: Saturday, June 27, 20
It works better than expected! I setup the KX3 on the front deck and worked
some stations with good signal reports earlier this week (SSB). I was running
all 15 watts!
Sent from Mail for Windows 10
From: Wayne Burdick n...@elecraft.com [KX3]
Sent: Friday, September 13, 2019 9:19 PM
To: Elecra
Desert tan!!
> On Sep 3, 2019, at 9:26 PM, Wayne Burdick wrote:
>
>
>> Mike Morrow wrote:
>>
>> ... [a] characteristic that is adverse to outdoor operation is its very dark
>> color scheme. That makes it an effective heat sink for solar
>> radiation...never a good thing unless operating in
Me too!!
> On Aug 28, 2019, at 5:32 PM, Jay Rutherford wrote:
>
> Ordered mine!
>
>> On Wed, Aug 28, 2019, at 16:40, MaverickNH wrote:
>> https://elecraft.com/products/axe1_40-meter-antenna-extender?mc_cid=19e05c5b30&mc_eid=f94cda7417
>>
>> Ordered mine already!
>>
>> BRET/N4SRN
>>
>>
>>
>
Thanks Eric!!!
I had also asked on several occasions with no response.
I plan to order some upgrades after Huntsville.
> On Jun 20, 2019, at 3:12 AM, Eric Swartz - WA6HHQ, Elecraft
> wrote:
>
> Our current plan is to keep the K3S in the product line as long as demand is
> sufficient to eco
Some more of the factory cork pieces between the transformer and case fixed
mine up – the 50 also.
Hank
K4HYJ
From: inventor61 .
Sent: Sunday, June 9, 2019 1:48 PM
To: li...@w2irt.net; elecraft@mailman.qth.net
Subject: [Elecraft] [OT] RS-35M noise
Peter
I now have the prototypes completed of a
Make sure the new version of WSJT-X still has the correct codec selected. Also,
Open the Windows volume control and check the volume level for the codec.
> On Jun 1, 2019, at 11:24 AM, jeff griffin wrote:
>
> Having an issue with no USB TX audio. When in TX all I see is one bar on
> the rf ou
Gentlemen…
Thank you for your help!!
I tried both Bob and Don’s method after letting the K3S warm up for about 30
minutes tuned into a SW broadcast.
After using Bob’s CWT method on 20 Mhz (conditions finally improved enough to
get a good S9+ signal), I could tune to any strong broadcast signa
reference source. Or wait for about an hour from
cold for the TXCO to stabilise. Calibration might be off, east to
correct, but it will not be moving much.
Regards,
Mike VP8NO
On 19/05/2019 18:02, HB wrote:
> Thanks Jim….Good feedback.
>
> Any other worthwhile mods to achieve
Thanks Jim….Good feedback.
Any other worthwhile mods to achieve stability?
Hank
K4HYJ
From: Jim - N4ST
Sent: Sunday, May 19, 2019 4:49 PM
To: h...@optilink.us; elecraft@mailman.qth.net
Subject: RE: [Elecraft] KTCX03-1 high stability reference oscillator
Hank,
From time to time I do meteor s
Unfortunately you can’t. I miss that feature from several other lesser radios.
You could target a particular audio frequency and set the width of the notch
filter and make the offending sound go away!
Hank
K4HYJ
From: Richard
Sent: Sunday, May 12, 2019 6:24 PM
To: Elecraft Reflector
Subject:
I would buy it!! Not crazy about the 9700.
> On May 6, 2019, at 4:16 PM, wrote:
>
> Will there ever be a VHF/UHF radio? I'm sure because of the cost factor
> there would a limitation. The interest would be the next question. Had to
> ask...
>
> Brian
> K1DIH
>
>
I had a Heil FS and desoldered the 1/4” and resoldered a right angle RCA plug
for the K3S. Works great!
Hank
K4HYJ
> On Apr 17, 2019, at 8:29 AM, Bob McGraw K4TAX wrote:
>
> Yes and the length of the 1/4" phone plug plus the length of the adapter to
> an RCA connector is something of serious
gt;> 5) Next run the FTDI driver installation. When prompted or when complete,
>> plug the USB cable back in.
>> Sometimes, windows will keep reinstalling the same driver if the files have
>> not been deleted.
>> 73 Tom
>> va2fsq.com
>>
>>
>>
>
> -Original Message-
> From: Dick Dievendorff
> Sent: Sunday, April 14, 2019 12:47 AM
> To: donw...@embarqmail.com
> Cc: HB ; Elecraft list
> Subject: Re: [Elecraft] KX3 Utility problem: serial port is closed
>
> The kx3 gets its inventory of com ports from re
Don….
I have verified the COM port in the Device Manager but the KX3 Utility does not
show any COM ports in the port window.
Hank
K4HYJ
From: Don Wilhelm
Sent: Friday, April 12, 2019 9:07 PM
To: HB; Elecraft list
Subject: Re: [Elecraft] KX3 Utility problem: serial port is closed
Hank,
Re-boot
Yes – multiple reboots.
From: Jim - N4ST
Sent: Friday, April 12, 2019 8:21 PM
To: 'HB'; 'Elecraft list'
Subject: RE: [Elecraft] KX3 Utility problem: serial port is closed
I just had this problem today after "upgrading" to Windows 10 Ver 1809.
Windows told me
Hey folks…
I have an unusual (I think) problem. I have a KX3 that I have used the KX3
utility software with several times without issue. Today when I start the
software there is no COM port to select. In the bottom left hand part of the
KX3 PORT window is says Serial Port is Closed. (I’m usin
So far Washington State from Georgia on 20 m running 10 watts from a picnic
table near the top of a dam on a POTA activation. I had the AX1 connected
directly to the KX3 with the bipod and was using the supplied counterpoise.
Hank
K4HYJ
> On Apr 12, 2019, at 12:02 AM, Steve Anness wrote:
>
Absolutely interested!!
> On Mar 28, 2019, at 3:34 PM, kd1ct wrote:
>
> I would be interested in the extender piece for the AX1 for 40 meters.
> Very useful for SOTA work.
> Thanks,
> Bob (KD1CT)
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> _
160 – 440 would be awesome! Satellite work in one box.
An all mode 2m, 220, 440, 23cm rig would also be nice – 100 watts.
Hank
K4HYJ
From: Bill Johnson
Sent: Sunday, March 24, 2019 8:30 PM
To: Eric Swartz WA6HHQ - Elecraft; Elecraft list
Subject: Re: [Elecraft] Will there be a K4
All band 160-
Never a waste when you learn and share!
> On Feb 23, 2019, at 12:46 PM, JEROME SODUS wrote:
>
> Hello,
>
> Please disregard my yesterday's email.
>
> I fired up the system today and everything works, which is a surprise since
> no changes were made.
>
> I have no explanation for this right
I have used an outboard compressor/expander for this (paired with a 7 band
parametric(quasi) equalizer) and besides normalizing audio levels can squash
static crashes and pad certain frequencies above a certain intensity
automatically (similar to de-easing in function). It was more analog than
This thread is hilarious!!!
There is an AI joke somewhere in here about a dummy load
> On Jan 13, 2019, at 1:50 AM, kevinr wrote:
>
> Sounds like a project for a neural network. A bit of AI which 'recognizes'
> patterns. There would be ~ 40 outputs for letters, numbers, and symbols. I
Easy is good!!!
From: K1dj
Sent: Monday, December 3, 2018 2:06 PM
To: Hank
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S will not load or tune on 160 M/SOLVED
Thanks all for the speedy and helpful replies! Wish I had run this by you
BEFORE the contest rather than after. I went back
27 matches
Mail list logo
