Hi Tom,
I am also a very happy KPA500/KAT500 user with an IC7000, 7100, and 7300. I
home brewed my own interface for the antenna tuner and the “big DIN” connector.
They all start an autoswitch routine to memorized frequency values that is fast
and accurate.
I always put the KPA500 in standby w
See if you can borrow a hi quality aviation noise cancelling headset to try
out. I have the now discontinued Sennheiser S1’s which work extremely well in
many situations including with a single engine open cockpit aircraft, riding
mowers, tractors, field day, etc. They have the added nicety of h
Nope, the Tim Conway reflector.
Jack Spitznagel, DDS, PhD
and KD4IZ... ;@)
see: https://youtu.be/bfTyEtVIe84
Sent from my iPhone
> On Nov 20, 2018, at 22:42, Brian Denley wrote:
>
> Is this the Tim Allen reflector? :o)
>
> Brian Denley
> KB1VBF
> Sent from my iPad
>
Hi John,
It uses the standard KXUSB (or an RS232 equivalent) cable. It configures from
HRD as a COM# port at a baud rate you set for the radio. I have 4 radios
configured including my KX3 and can control all four from HRD simultaneously
from my workstation.
Jack KD4IZ
Sent from my iPhone
> On
Congratulations Anne.
My contribution:
1. Get Fred Cady’s book. (another vote)
2. If you run digital modes with a soundcard device make sure you read the
advice in the book about setting up the soundcard, paying particular attention
to setting the ALC level properly. The generic setting informat
If you are not worried about run-amok Jeeps and American Tourister gorillas,
but are worried about weight, you might consider this or the 22 inch version
for more accessories. My entire KX3/PX3/KXPA100 station plus digital stuff and
phone fits fine in the smaller.
http://www.mcmelectronics.com/
Fred,
I have a widget that adapts a Sennheiser S1 av-noise canceler to my KX3. Use it
for hi noise situations and it works like charm, even Massey-Ferguson mobile.🙂
Try it with the David Clarks.
Was connector a mismatched size pair of phone jacks or a complex military
looking connector?
Jack
Good question John! With Field Day approaching, I was thinking the same since
KX3 will not be a primary ops rig. Love to hear the FM gurus speak up.
Jack KD4IZ
Sent from my iPhone
> On May 26, 2017, at 18:24, John Hendricks wrote:
>
> I plan on setting my KX3 with 2 meter module up for packe
And plenty here!
Jack. KD4IZ
Sent from my iPhone
> On May 17, 2017, at 16:14, Mark via Elecraft wrote:
>
> Re: We hope to add this to the KX3 as well, if there’s enough interest.
>
> Plenty of interest here!!!
>
> Mark
> KE6BB
>
>
> null
> __
Sent from my iPhone
> On May 16, 2017, at 16:11, kevino z wrote:
>
> Yes, Data A and even VOX
>
>
> -
> The problem with the world is that the intelligent people are full of doubts,
> while the stupid ones are full of confidence.
>
> On May 16, 2017, at
Jim,
I am not an HRD expert, but I have used the feature in DM780 that sets up
multiple Log Entry profiles to do just what you want. All you have to do is put
in a profile and a Locator combination for where you are and each rig you might
use at that location. I have 8 combinations now that I
Ahhh... my kinda contest... look for activation of the upper Gunpowder
Falls or Little Gunpowder.
My biggest problem will be that flyfishing, running the KX3, and logging
at the same time might not be so compatible.
KD4IZ
On 3/10/2017 14:29, John AE5X wrote:
This year's QRP to the Field is 22
Hi Brian,
Well it is usually about 65F(~18C) in the shack this time of year unless
I turn on the space heater. Not really "cold" per se. The PX3 will
misbehave on start up or after having been turned off for about 5 min.
even in warmer times. I guess what I mean by cold is different from
Cana
1.39
KXPA100 is at revision 1.39
AND ALL units are set for 38,400 and communicate with the computer.
All cables have been checked and are properly seated.
Thanks in advance for your help!
Jack Spitznagel KD4IZ
KX3 #6029 PX3#0941 KXPA#1488
_
All,
I am forwarding a note from Ev Tupis, W2EV - the chief concept engineer
and cheerleader of the PropNET project. I would urge all interested
folks to join in the 10 meter POP (play-on PropNET) over the Memorial
Day weekend. Please check out the new software (ACDS) that Jeff
Steinkamp, N7
I am seeing see about a 1 S-unit jump in this noise above the floor in
quiet band conditions when I use rig control (any program) on a Dell
laptop. Rig power supply is quiet.
Before I spend a lot of time reinventing things... and trying to figure
out how to search the archives for something th
George,
Thanks for posting this suggestion. It took a while for me to get a
"rountuit" and order one of these. I found it for slightly less from
Aircraft Spruce. I am using the PA-96 adapter with a Sennheiser S1 noise
cancelling headset that works beautifully for me by assisting my failing
ea
Question for Wayne and those KX3 gurus who have installed the 2M module:
Installation and setup seemed to go well, however I did have the
44.000/22.000 display issue that has been previously described. It was
cured using the suggestion from the list here. After an hour of tuning
around and spo
Matt,
Many thanks! You have provided a great reason (and a "rosetta stone")
for me to start exploring the command structure. Looks like fun.
Jack - KD4IZ
On 5/11/2014 02:39, Matt VK2RQ wrote:
I had some enquiries about the macros I am using to switch between packet and
SSB mode, so I did a
Good Weekend All,
Don't have easy access to search the archives, so at risk of a dup, here
is a "finding" from setting up the KX3, SignaLink with the KX3
Tigertronics made cables, and DM780. HRD works flawlessly with Elecraft
KXUSB here, but...
Using the little paper instruction insert that
20 matches
Mail list logo