Factory built K3/100w with auto antenna tuner and two extra filters:
400hz 8 pole and 2100hz 8 pole.
S/N 2063. Mint condition and fully working. Will deliver within a
reasonable distance or meet you halfway.$2395 plus you pay
shipping. Total recent retail value of comparable unit was
Factory built K3/100w with auto antenna tuner and two extra filters:
400hz 8 pole and 2100hz 8 pole.
S/N 2063. Mint condition and fully working. Will deliver within a
reasonable distance or meet you halfway.$2500 plus you pay
shipping. Total recent retail value of comparable unit was
Currently I manually switch between PC keying via a Microham Winkeyer
which keys via N1MM and a straight key by unplugging and re-plugging in
the back of the radio. I have been reluctant to simply parallel the two
by means of a Y cable for fear that sending with the straight key would
place a
Does the K3 recall output levels ONLY when used with the KPA-500 or will
it recall the levels for each band irrespective of the amp used ?
George K4GM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
My K3 using 4.22 will put out full power in TUNE position. The ATU
works fine and delivers 1:1 swr or close. However, if I switch to CW I
get zero power out. I switched to 5 watts out and still no power out on
cw. I hear the sidetone as I key and the radio appears to go into
transmit mode beca
how much a decoder costs I might just go for the gold and
buy an automatic KW+ external tuner. Tuning the L4B from band to band
is no big deal.
K4GM- George
Wes Stewart wrote:
> George,
>
> Sounds like you answered your own question.
>
> I'm using either a TS-870SAT or a K3 wi
using or selling the PW-1. My L4B works so well and doesn't need to go
to the shop every time I accidentally hit the remote head or the
outboard tuner arcs. All comments appreciated.
K4GM- George
__
Elecraft mailing list
Home: http://
Is there a significant difference between the 465 and the 475?
K4GM- George
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
I agree with everything you say and have used this method for years.
Now if only I could decode RTTY by listening!!
73, George K4GM
K9ZTV wrote:
As a adjunct to the recent posts on using the Spot and CWT features . . .
There is a third capability that many long-time CW operators
intuitively
This weekend I hope to hook up my PW-1 now that its back from Icom
again. Is there any real need to use a keying buffer between the two
? Based on the specs of the two units I would think a direct connection
between the two would work fine.
K4GM- George
one else is complaining about not being able to get the
tones for the buttons so I am certain this is a case of operator error
attributable to my lack of experience updating the firmware. Does
anyone know what I am doing wrong?
K4GM- George
AMP directly. Why would my STANDY/OPERATE
switch on the amp operate as a PTT switch? Do I need to set a parameter
in the K3? Of course all equipment share a common ground connection.
73, K4GM George
___
Elecraft mailing list
Post to: Elecraft
Does anyone use a K3 with a PW-1 setup to autoswitch the AMP as the K3
changes bands. ? Just replaced my 756 Pro II with the K3 and am
wondering whether it will be simple to operate the Amp as before.
K4GM- George
___
Elecraft mailing list
Post to
In anticipation of the arrival of my K3 this week I would like to know
whether the Yaesu MD100 will work with the K3.
K4GM- George
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
RigBlaster but would just use a direct
sound card connection. How do I control the radio via the PC?? Do I
just use the RS-232 connector or the ACC connector?? I'm trying to
determine whether I need to buy or make cables 73, K4GM G
15 matches
Mail list logo