I've been at V1.75 firmware for quite some time but random lockups of the
KAT500 started recently.
It might be helpful knowing what command caused the problem.
Jim/KK1W
w4sc-2 wrote
> Andy reported.
>
> “Several have asked for more detail. All I can share is that th
KAT500/KPA500 combo with an IC7610.
Lockups seem to be totally random but the behavior just started recently,
the setup has been in place for over a year
Thanks,
Jim/KK1W.
--
Sent from: http://elecraft.365791.n2.nabble.com/
Howard,
I have an XG-3. In like new condition, used maybe twice. Original box and
all accessories. I would take $250 plus USPS Priority shipping.
73...
Jim/KK1W
Elecraft mailing list wrote
> I want to buy an Elecraft XG3 signal source. If you have one to sell,
> please contact me desc
with KX3 #1124. I've made
hundreds of SOTA contacts since but most are CW.
Still using my KX3, this year not many SOTA activations but it has had a
workout in FD 2019 and 2020, 2A battery, QRP.
'73...
Jim/KK1W
> I've made hundreds of Field Day and contest QSOs using RTTY on Elecraft
> rigs,
...
Jim
KK1W wrote
> Was running about 150W on 18 MHz this afternoon. My KPA 500 made a loud
> pop. No more output. Any pointers of where to start looking?
>
> *Details:*
> KPA500 (use with KAT500 and Icom 7610)
> Antenna on this band is a SteppIR
> Amp has been running FB
&g
one it corrected the problem. Possibly trying
an older config file will fix your problem too?
As they say, YMMV, good luck.
Jim/KK1W
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http
that's not a big issue but
makes for good discussion.
Jim/KK1W
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3s-Hearing-low-level-rear-speaker-audio-with-SPKR-PH-no-and-low-AF-set-tp7627639p7627716.html
Sent from the Elecraft mailing lis
observations to the thread,
Jim/KK1W
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3s-Hearing-low-level-rear-speaker-audio-with-SPKR-PH-no-and-low-AF-set-tp7627639p7627696.html
Sent from the Elecraft mailing list archive at Nabble.com
This may help:
http://elecraft.365791.n2.nabble.com/How-to-interface-SteppIR-controller-to-K3S-when-using-USB-for-PC-connection-td7605673.html
Is been working fine for over a year now. I don't have a P3 but it should
get you started down the right path.
Jim/KK1W
--
View this message
Neil,
Very interested in the FT100's for a young ham friend. He has one, also with
issues, and maybe can make a good one out of three?
Are they "D" models?
Thanks!
Jim/KK1W
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FS-list-cleaning-shack-tp76223
Jeff,
If the KFL3B-FM is still available I'd like to purchase it.
Please let me know and if it's available how you would like payment.
73...
Jim/KK1W
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-K144XV-for-sale-tp7620289p7620319.html
Sent from the Elecraft
Thanks to Mike/VP8NO the problem is solved.
The solution was to check the 'Data' box in the subRX filter selection page.
It was unchecked, not sure why, or how I missed it during setup.
Once again the value of this list is exceptional.
Thanks again Mike,
Jim/KK1W
--
View this message
this is by design?
No logging software or K3 utility connected at the time, the K3 port is
closed.
Equipment:
K3s #00120
Firmware:
uC = 05.38
d1 = 02.86
d2 = 02.86
FL = 01.25
dr = 01.03
Thanks,
Jim/KK1W
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Disappearing-Line-Out-Audio
I see the same thing Dennis. I thought I was doing something wrong, or maybe
we both are? K3s here with latest firmware.
Jim/KK1W
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Disappearing-Line-Out-Audio-for-Sub-Rx-tp768p7611120.html
Sent from the Elecraft mailing
Dave,
I'll take if if still available. PayPal, check, whatever works best for you.
I tried the [hidden email] but it wouldn't work for me, sorry.
Jim/KK1W
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FS-KTCXO3-1-TCXO-High-Stability-Ref-Osc-for-K3-and-K3S
I bought this FSK interface on eBay for under $30. Plugs into the ACC port on
the K3s. Works fine with MMTTY and the built-in soundcard via USB on the
K3s. I know I could build one cheaper but I'm getting lazy.
eBay item number: 261934374053
Jim/KK1W
Rich,
Thanks for the explanation. I sure
received with your K3s. The Steppir controller has to be set for
38K baud.
If you're using the com port (not USB) I think the Y cable is correct but I
have not done it so it's just a guess. In this case the SteppIR baud rate
should match what you're using for rig control.
Jim/KK1W
--
View
Try enabling RX SHFT. It moves the IF from 0.0 to 8.0 kHz and usually solves
the problem. More detail in the manual on page 38.
Jim/KK1W
N4CW wrote
> While operating CW during the CQP at my Maine QTH, on different bands and
> at different times, I heard
> "voices" coming th
get yours working contact me directly via email and I'll send you screen
shots of my Winwarbler settings.
Jim/KK1WW
kk1w@gmail.com
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3S-WinWarbler-and-RTTY-FSK-tp7608253p7608256.html
Sent from the Elecraft mailing list
19 matches
Mail list logo