Re: [Elecraft] FSK on K3 using Winkey 3.0

ory > connection. Worked great. Took a few tweaks for the software products. > > I didn't think 3.0 was capable of RTTY. > > Joe, KO8V > > > On Feb 25, 2021, at 17:53, Leroy Buller wrote: > > > > Has anyone connected a Winkey 3.0 using RTTY output to FSK an

[Elecraft] FSK on K3 using Winkey 3.0

Has anyone connected a Winkey 3.0 using RTTY output to FSK and PTT through the accessory connection? Lee K0WA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: ma

Re: [Elecraft] Voltage drop in DX Power to K3

40 inches of power cable. In my experiences, that could be an issue depending on the gauge of the wire. I used a long cable 12 gauge and had issues. Went to 24 inches number 10 gauge and voltage drop significantly improved. The resustace does not have to be large to cause a voltage drop Lee

Re: [Elecraft] K3S poor CW keying further investigation

Chuck, I am late to this discussion so I might be saying things that already been said. I found the same issue. Voltage down to 11.5 volts on any ps I used. So, I found the issue was power pole connectors that were to light. Look for power pole connectors that handle 30 amps or so. Power poles

Re: [Elecraft] Clarification on Repair Process

Many of the > staff are working at home with only a few at the office location. > > 73, > Don W3FPR > > On 3/19/2020 2:39 PM, Leroy Buller wrote: > > My beloved K3 is in Watsonville for repair. Now, I can wait, but just > > curious as to how Elecraft will be dealing

[Elecraft] Clarification on Repair Process

My beloved K3 is in Watsonville for repair. Now, I can wait, but just curious as to how Elecraft will be dealing with repairs in light of the folderol going on in our country. Don't get me wrong, I want everyone health, wealthy and on CW...but curious how repairs are being handled. Be safe. Wa

[Elecraft] Where is Elecraft Support ?

Does Elecraft still have a support department or have they all move to K4 side? I emailed the several days ago and no response . They have always been very prompt before or is the frenzied activity to get the K4 out stopped up the plumbing? Lee. K0WA _

Re: [Elecraft] High Current only on 20 Meters

27;m betting on a LPF issue. > > 73, > Mark, WB9CIF > > -Original Message- > From: elecraft-boun...@mailman.qth.net > On Behalf Of Leroy Buller > Sent: Wednesday, March 4, 2020 21:24 > To: Bob McGraw K4TAX > Cc: Elecraft Reflector > Subject: Re: [Elecraft]

Re: [Elecraft] High Current only on 20 Meters

band dependent. > > Bob, K4TAX > > > Sent from my iPhone > > > On Mar 4, 2020, at 12:46 PM, Leroy Buller wrote: > > > > I have a K3 that seems to have a problem. I am getting HI CURRENT > warning > > only on 20 meters. The antenna is matched. 80, 40 a

Re: [Elecraft] High Current only on 20 Meters

I did a recalibration. Nada. Off to support Lee On Wed, Mar 4, 2020, 1:01 PM Don Wilhelm wrote: > Lee, > > That should be fine. Try doing the Transmit Gain Calibration on the K3 > and if it persists afterwards, email supp...@elecraft.com. > > 73, > Don W3FPR > >

Re: [Elecraft] High Current only on 20 Meters

will try to keep the power constant, so if the voltage is low, > the current must go up. > > 73, > Don W3FPR > > On 3/4/2020 1:32 PM, Leroy Buller wrote: > > I have a K3 that seems to have a problem. I am getting HI CURRENT > warning > > only on 20 meters. The an

Re: [Elecraft] High Current only on 20 Meters

Gold. They were replaced. On Wed, Mar 4, 2020, 12:36 PM Mike Flowers wrote: > What 'pins' do you have? Nickel-platted or gold pins? > > - 73 and good DX de Mike, K6MKF, NCDXC Secretary > > > -Original Message- > > From: elecraft-boun...@mailman.qth.ne

[Elecraft] High Current only on 20 Meters

I have a K3 that seems to have a problem. I am getting HI CURRENT warning only on 20 meters. The antenna is matched. 80, 40 and 15 do not have the issue. The current meter on the power supply does show quite a bit of current (20+ amps) on 20 meters but when I reduce power it stops giving me the

Re: [Elecraft] K3....s Raspberry Pi 4 B

Me too. Lee K0WA On Mon, Jan 20, 2020, 12:45 PM Jim Brown wrote: > On 1/20/2020 8:55 AM, AL7CR wrote: > > You might be able to use VOX. > > VOX is a perfectly good way to key the radio. I've used nothing but VOX > for SSB, RTTY, and WSJT modes for at least 15 years. > > 73, Jim K9YC > _

[Elecraft] K4 Remote Information

As this old dog is learning about SDR, Remote Control and such I have a simple question about "remote control of the K4." I understand the K4 has a Linux computer in it that acts like a "server" while controlling other aspects of the radio. Now, in my experience, when you had a server you need cl

Re: [Elecraft] THE FUTURE OF OUR HOBBY

This is a concern of mine for Elecraft. A low cost entry rig with 100 watts. Very hard to compete with I Y K for this market. Flex has the same issue but maybe the old man rich market is big enough for all players. Saving for a K4 Lee On Mon, Dec 16, 2019, 10:03 AM Charlie T wrote: > > Note

[Elecraft] K4 Beta Testers

I assume the K4 is being beta tested by a group of hand picked ops. Is that tfue? I know they are sworn to secrecy but will there be any discussion later on as to their observations of the various configurations of the K4? Reading the material is fine, but there is nothing better than direct te

[Elecraft] Comparison information

How does the basic K4 compare to the K3 when it comes to receiver specs? Is the K4 SDR just as good as the superhetrodyne K3 or do you have to upgrade to the superdooper K4? Lee __ Elecraft mailing list Home: http://mailman.qth.net/mailma

Re: [Elecraft] Silent power supply for a K3s

As alway...way cool. Lee K0WA On Sun, Jun 9, 2019, 6:16 PM Jim Brown wrote: > On 6/9/2019 7:52 AM, Peter Dougherty wrote: > > Any suggestions? Within reason, cost isn't a > > major issue. > > Sure. Another linear Astron, maybe bigger, higher power rated. I don't > know how common the buzzing pr

Re: [Elecraft] Silent power supply for a K3s

This is an issue that I have also, but have chosen to ignore. I have the samlex, astron ss30 and a rm30. The Quiet one is the rm 30. You might try to tighten the bolts on the transformer. That helped mine, but no fan. One issue is keeping the power cord short to keep from getting a voltage dr

[Elecraft] K4 Beta Testers

Are there any K4 Beta Testers out there yet? If so, can we get reports or is that verboten? Lee K0WA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elec

Re: [Elecraft] K4 and Linux Infrastructure

gt;>> So, let's let the elephant in the room bellow a bit. > >>> > >>> Ahem, CYBER SECURITY. > >>> > >>> Now that you've put a popular, modern OS in the K4, and hooked it up to > >>> Ethernet (and therefore the Internet), you've just ope

[Elecraft] K4 and Linux Infrastructure

So, K4 and the internal Linux system. What is it doing for the radio, processor type, clock speed ram, any ssd, and version. I am assuming or guessing it is a PI of some sort or tigally designed by Elecraft? Will anyone know? Lee K0WA __

[Elecraft] Test. This getting to the list?

I've been sending questions in about the K4 but no replies. I am getting a complex here Lee __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mail

[Elecraft] K4 SO2R or SO2V

Just thinking can a remote operator operate 1 band while a "live op" work the othe band? For instance, run station on SS using 20 and another op searching for stations in 15. I have to much time to think. Lee __ Elecraft mailing l

[Elecraft] K4 and Linux

What is the Linux processor and stats in the K4? Just curious like a nerd Lee K0WA Nerd since 1950 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecr

[Elecraft] Linux and K4

Can some one inform me as to the version of linux, the hardware used, processor, ram, and storage options in the K4? Thank you Lee K0WA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman

[Elecraft] K4, Spouse, Retirement, Burning Fascination

Ok, I told myself yesterday when the K4 leaked in a deluge of emails, that I was not going to get excited. After all, I am a K3 owner serial 443. This radio has been far beyond...great. i can crank out cw QSOs with the very basic K3. The Elecraft experience has been superb and superlative. I l

[Elecraft] K4 question fray

Erik and gang, will you have software that can run on a pc to control SDR etc like SDRPlay Flex, etc? Lots if questions, but i can wait. Exciting news. Now, i wonder hiw much i can get for the Kansas Farm? Lee K0WA __ Elecraft mailin

Re: [Elecraft] Intermittent loss of power output K3

Look at the two diodes in the SWR/watt meter circuit. These two diode are critical to the operation of the K3. These are the foundation of the K3s ALC implementation. Ive had to replace them. Lee K0WA On Fri, Mar 1, 2019, 8:47 AM Peter Lock wrote: > Good day > > Late last year, my K3 (no 695

[Elecraft] Auto spot

Works fantastic. Never read about this. Thanks for the info. Lee __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list ho

Re: [Elecraft] Urban stealth HF: Inside-the-backpack loop antenna?

When I was in College at Kansas State, I had a random length long wire out the window and up into some trees from the basement apartment. I used a simple coil and cap with alligator clips to make a LCD tuner on a piece of pine. What made it work was the copper pipe water inlet two feet from the

[Elecraft] K3 Standard internal Noise

I am trying to trace down a noise on 40 meters, but it seems to follow the VFO. On the P3, the noise is a gradual jump that is 6 khz wide. After the vfo is not used for a while, the noise disappears. Anyone have a direction to travel? Only on 40 mtrs it seems. Lee

Re: [Elecraft] ELECAN DUMMY LOAD

O. mojo. I'll take a case. On Tue, Jan 1, 2019, 10:34 PM eric norris via Elecraft < elecraft@mailman.qth.net wrote: > Now that Elecraft has a full line of high-power amplifiers, why not > produce a high-power dummy load? A one-gallon paint can, with a precision > resistor take-off for accur

Re: [Elecraft] Chrome OS and Elecraft Utilities

No, I would not think that a chrome book would work. I would suggest that you look on Craigs List for a laptop. My buddy just got a deal on an I7 with 7Pro for 100 dollars. There are very inexpensive computer systems out there. Caveate Emptorbuyer beware. On Fri, Nov 30, 2018 at 7:58 PM Da

Re: [Elecraft] I am flummoxed about my antenna

u changed it, I would suspect water in the coax. > > Victor 4X6GP > > > On 1 Dec 2018, at 18:54, Leroy Buller wrote: > > > > There > > I tried to get on 160 with my Inverted L last night. 60 feet up and the > > rest over to a tree, 130 feet total. About 20 ra

[Elecraft] I am flummoxed about my antenna

There I tried to get on 160 with my Inverted L last night. 60 feet up and the rest over to a tree, 130 feet total. About 20 random length radials in the yard. The best I can do with a city lot. This antenna worked last year very well, but now I get this 12/1/2018 10:46:08 AM NOTES: Freque

[Elecraft] Confessions of grounding

Ok, I just rebuilt my station and wonder how many of you actually ground your K3 or your rig? I have the amp and tuner grounded, but I find grounding the K3 somewhat difficult. Why? Getting my fat ham fingers to the rear if the rig and tighting up the knurled knob with stiff wire is quite infuri

[Elecraft] FS: N-Gen Module

For Sale: N-Gen Wide Band Noise Generator $50.00 PayPal OK Lee Buller K0WA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net T

Re: [Elecraft] "The Elecraft Story"

If you did around on 5th he elecraft web site you might find some written several years ago at my request. Pre K3 Lee On Fri, Jul 27, 2018, 11:12 AM Art Peters wrote: > Pete, > > Careful, that is darn near an antique book, but I too still reference > today, kidder did an excellent > job of cap

Re: [Elecraft] BNC T for IF Out

going. Would that not work? > > - pjd > > > -Original Message- > From: elecraft-boun...@mailman.qth.net [mailto: > elecraft-boun...@mailman.qth.net] > On Behalf Of John Simmons > Sent: Thursday, July 26, 2018 9:45 PM > To: Leroy Buller > Cc: Elecraft@mailma

Re: [Elecraft] BNC T for IF Out

Part number? Lee On Thu, Jul 26, 2018, 8:45 PM John Simmons wrote: > You should use a splitter with isolation. Mini-Circuits sells them. > > -John NI0K > > Leroy Buller > Thursday, July 26, 2018 8:38 PM > Stupid Question of the Month. > > Is it possible to us

[Elecraft] BNC T for IF Out

Stupid Question of the Month. Is it possible to use a BNC T to drive P3 and a SDRPlay at the same time? Is there enough drive to do this? Back to your regular programming. Lee K0WA __ Elecraft mailing list Home: http://mailman.qth

[Elecraft] CW AGC settings

Hello all. Long time posting here. I am interested in CW AGC settings you like on your K3. I have been fooling around with the settings and wonder what others like. I am interested in CW contest settings. Lee K0WA __ Elecraft mailing

Re: [Elecraft] [OT] Re: KPA1500 First RF Review

FM broadcast transmitters as well as AM broadcast transmitters have been doing thus for many years now. Lee K0WA On Dec 17, 2017 7:20 AM, "Dave B via Elecraft" wrote: > > On 15/12/17 22:14, Wes Stewart wrote: > > Here's your 3500 watt amp, listing Elecraft compatibility: > > http://www.kojinsha

[Elecraft] 8.215 Trap

Elecraft just repaired and updated my early model K3. One of the things they did was bypass the 8.215 trap. Tried to look at the schematic and Google the information, but to no avail. I know there is an IF at that frequency, but do not understand why they would bypass the trap. Could some one e

[Elecraft] Recommendation please

I am running a K3 with an RS232 connection to my Win 10 computer. Basic early model K3. I also have a p3. I want to move from a Signalink interface to a West Mountain Advantage interface to get some more flexibilty. I use N1MM to contest on CW and Rtty...MMTTY. I also want to look at WSPR X m

Re: [Elecraft] KX3 update utility download removed (i.e. blocked) by Norton Internet Security in Windows 7

Norton will allow you to override and installs it just fine. Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Oliver Barrett Sent: Friday, March 17, 2017 11:52 PM To: Elecraft@mailman.qth.net Cc: Oliver Barrett Subject: [Elecraft] KX3

Re: [Elecraft] ALC on RTTY Again

. Lee On Mon, Mar 6, 2017 at 3:22 PM, Don Wilhelm wrote: > Leroy, > > Have you considered that you may have a problem with your computer and the > soundcard (Signalink) output? > > There is always a tendency to blame the transceiver, but the fact that you > do not have the prop

[Elecraft] ALC on RTTY Again

I am installing a new computer system here and have had to install my Signalink USB and MMTTY. It seems to be working but there seems to be an issue with the K3. This kind of showed up on my on XP machine in recent weeks. Problem. There is not ALC no matter how hard a drive it with the mic gain

Re: [Elecraft] The market for Full Kit Radios?

Clifton Web used to make a precision IF buffer with a SMA connector Out of the back of the k2. I have one in my K2. That circuit schematic is on the web, there you Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent

Re: [Elecraft] K3 for SWL?

AM stations. Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dauer, Edward Sent: Wednesday, February 01, 2017 9:27 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 for SWL? I would like to hear from anyone who uses a K3 or K3S

Re: [Elecraft] CW macro for K-pod

Is there a macro that will send the CW ID when you are in side band? I have my K3s set to key CW in in side band, but the macro below does not Send when in side band. Thanks Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Cady, Fred

Re: [Elecraft] KPOD- POWER Macro

475W out on 160mtrs. That is TOO much drive for me on 6mtrs. Works for me. Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of 2EØLDZ Sent: Tuesday, September 06, 2016 3:40 AM To: elecraft@mailman.qth.net Subject: [Elecraft] KPOD- POWER

[Elecraft] KPOD macro help

increase or decrease with a macro? Thanks Leroy AB7CE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by

[Elecraft] Macro help

. Leroy __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email

Re: [Elecraft] KX2 - Option Pre-Installed?

Its all ready to go when you get it, man is it ready! Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of MaverickNH Sent: Monday, July 18, 2016 4:26 PM To: elecraft@mailman.qth.net Subject: [Elecraft] KX2 - Option Pre-Installed? I just

[Elecraft] Kpod arrival

Kpod arrived today. New K3S so one cable and it's working. Now to try to program some macros. Leroy AB7CE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] K3 power oddity

Original Message- > From: Ron D'Eau Claire [mailto:r...@cobi.biz] > Sent: Sunday, July 17, 2016 2:40 PM > To: 'Leroy Buller'; 'donw...@embarqmail.com' > Cc: 'elecraft@mailman.qth.net' > Subject: RE: [Elecraft] K3 power oddity > > Lee - t

Re: [Elecraft] K3 power oddity

o > level. The onset of ALC is indicated by the 5th bar. So 4 bars solid and > 5th bar flickering is the "no ALC" point for the K3. > In data modes, adjust the power with the Power knob, not the audio level. > > 73, > Don W3FPR > > On 7/17/2016 8:38 AM, Leroy Bull

[Elecraft] K3 power oddity

Operated RTTY NAQP this weekend. When changing bands, I noticed my power would drop to 40 watts or so. After several transmissions, it would rise to 100 watts. I don't think this is normal. All antennas are matched. Comments? Lee __

Re: [Elecraft] KXPD2s now shipping against backlog

Good, I hope mine gets here so I can show off the KX2 ant the Glacier/Waterton hamfest at Glacier Park next week. Hope my Kpod is somewhere too. There's a spot where my hand rests on the desk when I relax in my chair that's waiting for it. :) Leroy AB7CE -Original Message

Re: [Elecraft] Cannot connect to K3S utillity

Does not matter, still won't connect. Tried two Win 7 computers. -Original Message- From: Nr4c [mailto:n...@widomaker.com] Sent: Monday, June 13, 2016 8:35 AM To: Leroy Marion Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] Cannot connect to K3S utillity Locate RS-232 i

[Elecraft] Cannot connect to K3S utillity

reload a working config. Also the per band power limits the K3 to 12 watts and the amp to ~250 watts. How do I get ~400watts ? The receiver on this radio is phenomenal, audio is FANTASTIC. Thanks, Leroy AB7CE

[Elecraft] K3 - PSK31 - AGC/No AGC

Hi guys Old topic from a Old Newbie. I have been fooling around with PSK 31 and I have it set up and working but I do have a question. Do most ops using this mode turn off the AGC and then ride the RF gain control because of the stronger signals in the band pass killing off the weaker signa

[Elecraft] test

test __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list

Re: [Elecraft] Getting Started With CW

technology for CW. Also used for PSK31 and other modes. Leroy AB7CE -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tom Blahovici Sent: Sunday, November 30, 2014 10:06 PM To: Jim Brown Cc: elecraft

Re: [Elecraft] K3 CW decoder and CQ CW contest

If I had to use a straight key, I would give up CW entirely. I went right to paddles and a keyer. I have about 20 various CW capable radios, every one of them has a built in keyer Does not a paddle and keyer give you perfect timing? Leroy AB7CE -Original Message- From: Elecraft

[Elecraft] MC-60 microphone

d for Years normally. ??? Leroy AB7CE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] K1 test problem

I am a first time "K1" builder and am having a very difficult time getting the proper voltage measurements for the test on page 46 of the manual. Test point J7 pin 8 should be 3.8vdc I get "0" The test points on Diodes "D9","D10","D11","D13", all measure "0" Any suggestions as to how to go abo

[Elecraft] leeb...@hotmail.com

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.ne

Re: [Elecraft] KX3 firmware update (12-kHz audio spur fixed, etc.)

I have a huge improvement in the Weaver demod. I did not use it before. The auto tune memories improvement is also a great upgrade. Thank you Wayne and Elecraft team for continuing to make the KX3 the most remarkable QRP radio ever. Leroy AB7CE -Original Message- From

Re: [Elecraft] CW Key suggestions ?

N3ZN Keys. Beautiful, precision, fully adjustable, AMERICAN made. I have lots of keys(including Schurr) and it’s the one I use. Leroy AB7CE -Original Message- From: John Strandberg Sent: Sunday, June 24, 2012 6:59 PM To: Ronald Nutter

Re: [Elecraft] IF tap?

Or to your softrock for a panadaptor. Clifton Labs has high quailty/easy to build IF ports. I put one together in my K2, it works excellent. Leroy AB7CE -Original Message- From: Don Wilhelm Sent: Monday, January 02, 2012 2:01 PM To: Steve KC8QVO Cc: elecraft@mailman.qth.net Subject

Re: [Elecraft] K2 SSB wider filter mod

You might want to check yours first with spectrogram or other program before assuming what the bandwidth is. Mine is one of the field test models, and has a little more than 2.4 KHz bandwidth. Leroy AB7CE K2 Serial # 40 -Original

[Elecraft] KX3

Wow! A while back when we were throwing out ideas for an Elecraft wish list, I expressed a desire for a KX1 that covered 15 and 10 meters. I sure got that and more! I’m tempted to ask for a 100 MPG hover craft and see what happens! My only question now

[Elecraft] anyone have a KX1 or k1 that is excess

looking for KX1, 40/20 is fine. Auto tuner nice but not absolute. K1 would also work. email me off list please Roy AB7CE __ Elecraft mailing list Home: http:/

[Elecraft] Yet another product idea

I enjoy QRP Give me a KX1 that does 20, 15, and WOW, 10 mtrs! The 80mtr end is of no use, push it up to some real low power QRP bands. Then a handheld 2 watts would be incredible! And maybe options for 17 and 12 mtrs.

[Elecraft] XV50 transverter CW use

I just finished a XV50 transverter. Using it with a K2 with the KI02 control. It seems to work OK when keyed for SSB. When I use CW, its relays click and chatter like mad. Do I have some thing set wrong? Roy AB7CE ___

Re: [Elecraft] K2 lifespan

l you tell them. I also have the K1 and the KX1, they are as high quality and fun. The workhorse is my K2. Its been a fun run that’s not over for me. Leroy Marion, AB7CE K2 SERIAL NUMBER 40 -Original Message- From: Shane Sent: Wednesday, March 23, 2011 9:05

Re: [Elecraft] MH2 Microphone audio quality

r not. 73 Roy AB7CE -Original Message- From: Don Wilhelm Sent: Friday, February 25, 2011 5:24 PM To: Leroy Marion Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] MH2 Microphone audio quality Did you purchase this K2 used, and/or do you know what is inside it? What

Re: [Elecraft] MH2 Microphone audio quality

I just purchased a MH2 to use with K2. I'm getting reports of 5/9 but with some distortion or "rattle" audio with mic gain on 1. If I try other mics, I get clean audio reports but way down in signal strength. The resistor is installed and jumpers there. A Kenwood dynamic mike wired for K2 gets t

Re: [Elecraft] kpa-500

Is the KPA 500 going to be K2 compatible ? Roy AB7CE -Original Message- From: Phil & Debbie Salas Sent: Monday, February 21, 2011 6:21 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] kpa-500 "...I have a k3/10 and wonder if a

Re: [Elecraft] Taken the plunge!

You will not be disappointed. Just last night I worked 160 meter Delaware and Kentucky, QRP 10 watt SSB to 10 watt SSB, and many other QRO stations. I can work any state on 160 with 5 watt CW. Astonishes the Big guns. Its all about antennas anyway. Roy, AB7CE,