Norton will allow you to override and installs it just fine.
Leroy AB7CE
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Oliver
Barrett
Sent: Friday, March 17, 2017 11:52 PM
To: Elecraft@mailman.qth.net
Cc: Oliver Barrett
Clifton Web used to make a precision IF buffer with a SMA connector
Out of the back of the k2.
I have one in my K2. That circuit schematic is on the web, there you
Leroy AB7CE
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent:
Well with the short wave stations just about gone, except for the religious
stations, I not sure I see the point. But my K3s with the sub receiver so you
can run diversity receive is the hottest receiver I have owned in my 50 years
of doing so. Way overkill to receive the few multi kilowatt
Is there a macro that will send the CW ID when you are in side band?
I have my K3s set to key CW in in side band, but the macro below does not
Send when in side band.
Thanks Leroy AB7CE
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Cady,
Fred
In a TAP position I have TUNE5WPC005;SWH16; goes into 5W tune,
Tap again it goes to operate.
In the corresponding HOLD I have TUNE15W PCO15;SWH16; Goes to 5W
tune(I have the CONFIG TUNE PWR set to 5W), sets the drive level to 15W.
TAP it again it goes to operate. That gives me
I am doing something wrong when it comes to PRESS or HOLD macros.
Does anyone have a macro that PRESS tunes at one power, and HOLD tunes at
higher power?
I can make one button do one or the other, but when I combine to one button
it only one will work.
Any way to make the volume
I am having some success with the Kpod marcros. I have read thru the
programing reference
But still need some help I am a macro beginner.
1. What would be the one tap turn on the diversity one hold same
button turn it off macro. I can make it do it but it does not turn off the
Its all ready to go when you get it, man is it ready!
Leroy AB7CE
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
MaverickNH
Sent: Monday, July 18, 2016 4:26 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX2 - Option Pre-Installed?
I just
Kpod arrived today. New K3S so one cable and it's working. Now to try to
program some macros.
Leroy AB7CE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Good, I hope mine gets here so I can show off the KX2 ant the
Glacier/Waterton hamfest at Glacier Park next week.
Hope my Kpod is somewhere too. There's a spot where my hand rests on the
desk when I relax in my chair that's waiting for it. :)
Leroy AB7CE
-Original Message-
From:
Does not matter, still won't connect. Tried two Win 7 computers.
-Original Message-
From: Nr4c [mailto:n...@widomaker.com]
Sent: Monday, June 13, 2016 8:35 AM
To: Leroy Marion <lmar...@mt.net>
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Cannot connect to K3S utillity
Loc
I am the proud owner of K3S SN 10823. After sleeping on it, I still cannot
get the Utility to connect.
My computer sees The radio it on COM5. I have turned off everything else
connected, the amp, tuner and P3.
I need to figure this out so I can save configs, so when I goof up I can
test
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
If I had to use a straight key, I would give up CW entirely. I went right to
paddles and a keyer.
I have about 20 various CW capable radios, every one of them has a built in
keyer
Does not a paddle and keyer give you perfect timing?
Leroy AB7CE
-Original Message-
From: Elecraft
I have from the Schurr Profi to home made keys.
One of the best I have is the Norcal paddles Kit key,.
It’s a magnetic(versus springs ) type key. I did put silver contacts on it.
It was picked up by Vibroplex and made as the Code Warrior, I think.
I don’t think Elecraft sells the
Here is a different problem for K2 gurus:
Using a Kenwood MC-60, when keyed it toggles the K2 into transmit,
and won't come out of transmit until you cycle power switch.
Hand mic or Heil with foot switch works fine.
Batteries in or out of MC-60 makes no difference. It worked for
N3ZN Keys. Beautiful, precision, fully adjustable, AMERICAN made.
I have lots of keys(including Schurr) and it’s the one I use.
Leroy AB7CE
-Original Message-
From: John Strandberg
Sent: Sunday, June 24, 2012 6:59 PM
To: Ronald Nutter
Or to your softrock for a panadaptor. Clifton Labs
has high quailty/easy to build IF ports. I put one
together in my K2, it works excellent.
Leroy AB7CE
-Original Message-
From: Don Wilhelm
Sent: Monday, January 02, 2012 2:01 PM
To: Steve KC8QVO
Cc: elecraft@mailman.qth.net
Subject:
Wow! A while back when we were throwing out ideas for an
Elecraft wish list, I expressed a desire for a KX1 that covered
15 and 10 meters. I sure got that and more!
I’m tempted to ask for a 100 MPG hover craft and
see what happens!
My only question
looking for KX1, 40/20 is fine. Auto tuner nice but not absolute.
K1 would also work.
email me off list please
Roy AB7CE
__
Elecraft mailing list
Home:
I enjoy QRP Give me a KX1 that does 20, 15, and WOW, 10
mtrs! The 80mtr end
is of no use, push it up to some real low power QRP bands. Then a handheld 2
watts would
be incredible! And maybe options for 17 and 12 mtrs.
I just finished a XV50 transverter. Using it with a K2
with the KI02 control.
It seems to work OK when keyed for SSB. When I use
CW, its relays click and chatter like mad. Do I have
some thing set wrong?
Roy AB7CE
.
I also have the K1 and the KX1, they are as high quality and fun.
The workhorse is my K2.
Its been a fun run that’s not over for me.
Leroy Marion, AB7CE K2 SERIAL NUMBER 40
-Original Message-
From: Shane
Sent: Wednesday, March 23, 2011 9:05 PM
To: elecraft
or not.
73 Roy AB7CE
-Original Message-
From: Don Wilhelm
Sent: Friday, February 25, 2011 5:24 PM
To: Leroy Marion
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] MH2 Microphone audio quality
Did you purchase this K2 used, and/or do you know what is inside it?
What I am
I just purchased a MH2 to use with K2. I'm getting reports of 5/9 but with
some distortion or rattle audio with mic gain on 1.
If I try other mics, I get clean audio reports but way down in signal
strength. The resistor is installed and jumpers there.
A Kenwood dynamic mike wired for K2 gets
Is the KPA 500 going to be K2 compatible ?
Roy AB7CE
-Original Message-
From: Phil Debbie Salas
Sent: Monday, February 21, 2011 6:21 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] kpa-500
...I have a k3/10 and wonder if
You will not be disappointed. Just last night I worked 160 meter Delaware
and Kentucky, QRP 10 watt SSB to 10 watt SSB, and many other QRO stations.
I can work any state on 160 with 5 watt CW. Astonishes the Big guns. Its
all about antennas anyway.
Roy, AB7CE,
27 matches
Mail list logo