did, I made sure that the EQ
was flat and all DSP I know about was off. No NB, NR or AFX. Currently it
happens only on 20M, 40M seems fine, haven't checked the others yet.
Mike, AB3VN
On Wednesday, August 18, 2021, 10:11:48 PM EDT, Al Lorona
wrote:
Hi, Mike,
This issue comes up regularly
Don,
no, all sound processing is off.
Mike, AB3VN
On Wednesday, August 18, 2021, 12:07:43 PM EDT, Don Wilhelm
wrote:
Mike,
Do you have the Noise Blanker turned on? That will create some
"strange" sounds in the audio.
73,
Don W3FPR
On 8/17/2021 5:10 PM, Mike Kholodov vi
cases. Has
someone had the similar problem and is there any solution before I request the
official support?
Thanks,Mike, AB3VN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
? A quick check of the email reflector archive didn’t
turn up anything obvious to me.
73,
Mike AE6NH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Win4k3suite
Mike
Kk9v
On Fri, Aug 13, 2021, 7:12 PM David Bunte wrote:
> Bruce -
>
> I have been using the DXLab suite of modules for logging and rig control. I
> think I have been using it for close to ten years and have never wished for
> anything else.
>
> Dave - K9
Hi Rick,
Have you tried reloading a saved working configuration? Does the red TX
led illuminate? If you press the TUNE button is there any output and
what does the SWR indicate.
Regards,
Mike VP8NO
On 07/08/2021 23:16, Richard Isaacs via Elecraft wrote:
I recently purchased a K3
it.
I only used this arrangement for the rather extended duration of the
tests. Normal DXing which at the time netted me 200+ DXCC before I built
a K3 seldom activated the little screamer.
I can email you a picture of the setup if you wish.
Regards,
Mike VP8NO
On 07/08/2021 22:35, jerry
On 8/5/2021 1:18 PM, Mike Dodd wrote:
So if you want to run a KPA1500 from 120V, tell the electrician the
current draw at 120V, and ask him about running a 30A 120V circuit to a
30A receptacle.
Oops! I just looked at the KPA1500 specifications and found this for
Supply Voltage and Current
, and ask him about running a 30A 120V circuit to a
30A receptacle.
73, Mike N4CF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
elecraft...@groups.io
Thanks to all who replied. I just joined. Didn't know it was on groups.io.
--- Mike N4CF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Is there a separate Elecraft list devoted to the K4? I don't heard that
there is, but I don't see one listed on
<http://mailman.qth.net/mailman/listinfo/>
73, Mike N4CF
__
Elecraft mailing list
Home: http://mailman.qth.net/m
I understand Elecraft no longer sells the P3SVGA Board for the K3/K3s. I'm
looking for the board and associated cabling for a K3 if anyone has one they
would be willing to part with.
Thanks,Mike KD8RQE
__
Elecraft mailing list
Home
Hi,
Looking to replace my dead SW portable often used for RFI tracking.
Tecsun seem to be popular. Any suggestions which model?
Regards,
Mike VP8NO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Testing Elecraft email K0AZ
--
This email has been checked for viruses by AVG.
https://www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Surplus to my needs. In nice three ring binder. $12.00 plus Media Mail
postage. This was my printing cost.Email w...@near-fest.com
73,
Michael, W1RC
__
Elecraft mailing list
Home:
AKA "Torpedo Juice"?
> On 07/14/2021 5:04 PM Ed Pflueger wrote:
>
>
> I'm in Kentucky we call it White Lightening. In the Navy we used 190 proof
> to clean the salinity cells.
>
> Ed.. AB4IQ
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
>
The Non-slip dash mats work very well too, that's all I use. Mike n6zw
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
A short strip of friction tape under the feet works well also.
Mike AC5P
On Thursday, July 8, 2021, 03:07:37 PM CDT, Walter Underwood
wrote:
Yep, Museum Wax is the good stuff.
https://www.amazon.com/Quakehold-66111-Museum-Ounce-Clear/dp/B000FJU29U
<https://www.amazon.com/Quakeh
earns mode A or mode B, there is no factual basis to claim one
mode superior for ANY purpose over the other.
Mike / KK5F
-Original Message-
From: Louandzip
Sent: Jul 6, 2021 11:05 AM
Cc:
Subject: Re: [Elecraft] A or B?
I'm a squeezer and use B. It's physically the easiest, particularly
and easier to learn, but mode B is
the only mode the keyer in many radios will allow. Neither mode offers any
advantage in terms of reduced paddle manipulation.
Mike / KK5F
-Original Message-
From: Gary Peterson
Sent: Jul 6, 2021 9:34 AM
To:
Subject: [Elecraft] A or B?
An old
Thanks for all the info and advice, both here and off-list. I will
install the current driver from the FTDI website. I've done it several
times for Elecraft and astronomy equipment, and it's easy. No reason not
to do it.
73, Mike N4CF
ation.
73, Mike N4CF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Sad news.
RIP Ken. Thoughts and prayers to the family. I have a bunch of Rose's
fine covers.
W0MU
On 6/30/2021 8:07 PM, Bob Wilson, N6TV wrote:
Retired case-maker Rose, N7HKW, and her OM Ken, K0PP, seemed like part of
the Elecraft family for so many years.
Solid state filaments?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Atomic Pi is an alternative for this. I have one running Win10 and logging
app. 12v power.
On Wed, Jun 30, 2021 at 11:51 KJ7SOY wrote:
> Unfortunately that’s a terrible idea. I’ve been using Pi’s for 8 years. I
> currently have 23 of them deployed managing our home automation,
> surveillance
I'm trying to find a "handlebar mount" to mount a KX2 on my Segway Ninebot S
MAX. The "handlebar" on the S Max is not a straight bar, but a round donut type
of handle. All of the Cell phone handlebar mounts will not work with the KX2.
Any one with any ideas out ther
I wish more would do the honour of letting the list know the cure.
Regards,
Mike VP8NO
On 14/06/2021 13:18, Michael K Bottles via Elecraft wrote:
No worries Lance, I hate to tell you how often I have performed “Operator
Error”!
Kim - K7IM
Sent from my iPad
On Jun 14, 2021, at 09:16, Lance
) in parallel with C12 (10pF), and the collector of Q1 goes above the
board directly to Z4 instead of into its hole in the PCB. Has anyone seen
this mod or the reason for it documented anywhere?
Thank you.
73,
Mike Cizek W0VTT
New Kid on VHF
The KPA-500 transformer should be more than just a "hair" away from sides
(step 6 above) as there are rubber bumpers and a ribbon cable between that
should NOT be pinched. Refer to Kit Assembly Instructions page 35 and figure
52.
Mike AC5P
On Sunday, May 30, 2021, 07:29:59 AM
Hi Ronnie,
As a first step, try reseating all the RS-232 cables involved on the P3 and K3.
Any corrosion on a pin, etc., might be a source of such a tone.
Worth a shot ...
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraft-boun...@mailman.q
the KPA500 in STBY mode
to bypass its PA)?
Just wondering if the issue arises in the KPA500 ALC feedback to the K3S
rather than directly in the K3S itself?
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
,
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
, but these are the
folks that come to mind.
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
ch is wired to tip and sleeve on aTRS
> plug and confirmed that it works.
>
>> On Sat, May 8, 2021 at 7:15 AM Mister Mike wrote:
>> Do I connect the two wires from the key to a 1/4” stereo plug S
socket.
73,
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Do I connect the two wires from the key to a 1/4” stereo plug Sleeve and Ring
or Sleeve and Tip?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Check <http://nc0b.com/> for his information.
...Mike, AB9V
On 5/5/2021 8:28 AM, Richard Donner wrote:
I noticed that sherweng is gone from the internet.
Anyone have information about this?
tu
__
Elecraft mailing list
Home
I buy all my hook up wire from All Electronics in the L.A. area. But I don't do
super special type of electronics, just general stuff. I wind almost all my
antenna toroids with their wire. Mike n6zw
> On 05/02/2021 2:06 PM Mark Goldberg wrote:
>
>
> If you want the best, super ea
any suggestions and cautions about how to effectively use the PR6
for my 6M operation.
Thank you in advance for your help!
- 73 and good DX de Mike, <http://www.qrz.com/db/k6mkf/> K6MKF, NCDXC
<https://www.ncdxc.org/>
2 K3SYN Rev A boards
1 KXV3-2 rev a board
Is anyone interested in these? If so, shoot me an offer directly.
w...@w0mu.com
W0MU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Just be glad all you guys checking power lines don't live in CA with PG For
sure. Mike n6zw
> On 04/27/2021 10:15 AM j...@kk9a.com wrote:
>
>
> Probably more RFI will come from neighboring homes but it's easy to
> check with a receiver before installing your tower. If there is
I took 2 years of Drafting in High School (Engineering and Architecture).
At Virginia Tech (VPI at the time), I took all the Engineering Graphics
courses offered even though I was not an engineering student.
I taught high school drafting for the next 31 years and I now teach
AutoCAD, Inventor and
I KNEW that would get a response. :) Mike
> On 04/26/2021 8:37 PM SteveL wrote:
>
>
> Sorry,
> We are wading through and reminiscing about our early engineering training in
> the 1960’s and into the 1970’s…
>
> The CRC? A thick book of tables of computed values
What the heck are all those things you guys are talking about? Mike n6zw
> On 04/26/2021 11:18 AM Bill Frantz wrote:
>
>
> OK, I can't resist any longer.
>
> On 4/26/21 at 11:33 AM, lawr...@woh.rr.com (SteveL) wrote:
>
> >Who carried around a CRC book of tab
Golly, Jim hit it ion the head. Same with me, script has gone south, but
printing is still pretty good. We had to print all our reports way back when I
was working. Now all the guys use computers in the car. Guess that's progress.
Mike n6zw
> On 04/26/2021 4:54 AM Barry wrote:
>
>
Check here - options are half-deposit and full deposit.
https://elecraft.com/pages/k3-k3s-options
73,
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
You bet there is! from retired LE, Mike
> On 04/25/2021 8:13 AM Hank via Elecraft wrote:
>
>
> There’s a joke there somewhere!!
>
> Hank
> K4HYJ
>
> > On Apr 25, 2021, at 9:28 AM, eda...@aya.yale.edu wrote:
> >
> > I never took a drafting class no
Way back then in 1955, we only had Mechanical Drawing, no drafting. Mike
> On 04/24/2021 6:11 AM Barry wrote:
>
>
> High school in 1975? You're just a kid in ham circles, Wayne :-)
>
> Barry W2UP (HS class of '74)
>
>
>
> --
> Sent from: htt
I recently broke out my Dietzgen Stellar drafting set. Using it to layout
features for my steam engine project.
On Sat, Apr 24, 2021 at 00:11 Wayne Burdick wrote:
> OK, I've really dated myself now.
>
> Anyone remember "drafting"? A favorite class in high school: blueprints,
> mechanical
ground. Boy, could I
tear up nearby stereos on several floors of Smith Dormitory.
Those really were the good ol' days...just barely a mere 50 years ago. :-)
Mike / KK5F
-Original Message-
>From: Wayne Burdick
>Sent: Apr 24, 2021 12:08 AM
>
> OK, I've really dated myself now.
Bill:
You should really read the eHam Reviews and the K4 groups.io . Elecraft
is shipping and people are receiving their K4's
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
__
Elecraft mailing list
Home: http://mailman.qth.net
cDaILYBYDMBGMB2ArCAugXyA
Perhaps you can find a distributor in the UK. GL.
73,
Mike Cizek W0VTT
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of David Pratt
Sent: Saturday, 17 April, 2021 12:41
To: elecraft@mailman.qth.net
Subject: [Elecraft] XV144 Crystal Oven
I
Don,
I've observed that the rate of new posts has gone down (no scientific
estimate, just a gut sense based on daily checks of the forum). I have no
speculation as to why.
73,
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com
Have you tried a deflector tube on the internal speaker to direct the sound
toward your head/ears?
Mike AC5P
On Thursday, April 1, 2021, 01:18:45 PM CDT, Louis Visconti
wrote:
Can some one point me to a decent external speaker for my K2. Thanks.
Lou, KD2MU
--
This email has been
ur $$ back and go buy a
YaeKenCom radio or 40 year old Heathkit.
The whining is getting loud.
No amount of it will help.
Mike VE9AA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
The point of all of this is why is Elecraft not on this list telling us
these things like they used to?
I hear lots of excuses. Sure there are supply line problems for
everyone. HRO still has lots of product. Elecraft has a big competitor
in FLEX are they having similar issues? I hear
It is puzzling to see the lack of substantive information as other have
posted. This has not been how Wayne and Eric and Elecraft have operated
in the past.
I don't believe it is asking too much for regular updates on delivery
dates.
Just because some are not happy with a delay does not
I would encourage people to get the gear off the floor. My computers
that were on the floor got far more dirty than when I had them setting
up higher. YMMV
W0MU
On 3/27/2021 4:22 PM, Ken K6MR wrote:
As you know, I run my amp in a single amp, SO2R configuration. During a heavy
2BSIQ
Hello Eric,
It's in theKPA100 manual, at the back under Specifications:
DC relay coil pulled to ground
1A at 200 VDC (do not use with AC-controlled relay)
P59 in my book, which I just noticed, comes right after p62.
73,
Mike Cizek W0VTT
-Original Message-
From: elecraft-boun
As a bass clef guy my entire life, I have my sidetone set at 300 Hz. Sometimes
wish it would go lower.
73,
Mike Cizek W0VTT
Retired Bass Trombonist
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Dave Fugleberg
Sent: Saturday, 13 March, 2021 18:07
Hello Fred,
I use the programmable function keys for this:
PF1= ^fc2;
PF2= ^fc0;
Fan speed 2 is usually enough to keep the heatsink temp below 70C.
73,
Mike Cizek W0VTT
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Fred Kemmerer
Sent: Friday, 12
73,
Mike Cizek W0VTT
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Mark Goldberg
Sent: Wednesday, 10 March, 2021 08:56
To: Elecraft Mailing List
Subject: Re: [Elecraft] Now looking for a K3S KTCXO3-1
If the Chinese TCXOs for the K3 are anything like the ones
Hello Gary,
Elecraft reported having problems with the TCXOs a while back. Mine isn't very
well behaved, either, but it stays within a few Hertz compared to WWV on 10 MHz.
73,
Mike Cizek W0VTT
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Gary Peterson
expected.
Mike / KK5F
-Original Message-
>From: Julia Tuttle
>Sent: Mar 7, 2021 6:20 PM
>To: Elecraft
>Subject: [Elecraft] KXBC3 clock accuracy?
>
>Hi,
>
>How accurate do folks find the RTC on the KXBC3 is? Mine seems to be
>gaining a second or so a day
es.
https://web.archive.org/web/20150905061319/http://www.elecraft.com/manual/K2_Rev_2_FW_Rev_J.pdf
I hope this helps a bit more
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Does this link get you there?
https://elecraft.com/pages/k2-mods-and-notes
I did not find a list of features incorporated in the various firmware
updates.
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft
the signal path through D25. That choke failed open.
Mea culpa, and 73,
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
manual.
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
failure
possibilities. The old thread is here:
http://elecraft.365791.n2.nabble.com/Elecraft-K3-problem-td7663573.html#a7663581
73,
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http
I have a Collins Radio 30L-1 Linear Amplifier. I would like to use it with my
Elecraft K2 as well as my K3.
I have performed a “soft keying” mod which involves modified the keying line in
the 30L-1 by using a relay from -170 V 70mA (which was the original
specifications) to -15V 1mA. This
near the end. This works for me, so I no longer worry about this FW bug.
- 73 and good DX de Mike, K6MKF, NCDXC Secretary
> -Original Message-
> From: elecraft-boun...@mailman.qth.net boun...@mailman.qth.net> On Behalf Of Dave Cole
> Sent: Monday, February 08, 2021 14:34
&g
Well written and fun to read!
The chirpy signals are pretty much gone but the key clicks seem to be
getting worse. Even some of the newer high-dollar radios are pretty bad.
--
73,
Mike Cizek W0VTT
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Was the KSYN3A synthesizer ever built into the K3 as a standard item? If so,
beginning at what serial number?
Thanks,
Mike NJ2OM
> On Jan 25, 2021, at 10:51 AM, Henry Pollock - K4TMC
> wrote:
>
>
> Mike,
>
> You can look at the numbers on Sherwood Engineering
-problem.
Mike / KK5F
-Original Message-
>From: K4HYJ via Elecraft
>Sent: Jan 17, 2021 4:20 PM
>To: 'Wes' , elecraft@mailman.qth.net
>Subject: Re: [Elecraft] Waaay OT: A new kind of QRM to be aware of ... warning
>issued by FCC today
>
>I feel safer now!!
>
>K4H
The AF and RF Gain controls on my K3 fail to operate from time to time.
Powering off and on the rig seems to solve it (until it happens again).
Common problem? Thanks. Mike K4QU
__
Elecraft mailing list
Home: http://mailman.qth.net
is not a major annoyance but I surely would
like to have it resolved. Incidentally, I normally run the amp via
KPA1500 Remote connected via ethernet and seldom touch the front panel.
The K3 is on a very heavy duty UPS so it never powers off except via
it's front panel.
Good luck!,
Mike, AB9V
On 1/12
On Mon, Dec 28, 2020 at 09:01:31PM -0600, w...@flashdog.us wrote:
> Greetings Everyone & HNY,
>
> I am having problems setting up Fldigi with a new macMini & my K3S. I
> receives signals, but I cannot transmit. I have no problems using WSJT-X.
> Any help, on or off list, would be most
I believe the rather thick "shield" was actually a stiffener to prevent
microphony at high audio levels using the internal speaker.
Regards,
Mike VP8NO
On 01/01/2021 18:22, g4piq--- via Elecraft wrote:
And a small correction to this in case anyone else gets inspired to do
anything.
system with two simple audio cables for years. Now I have
upgraded my K3 with the K3s I/O and simply pipe audio, CAT, PTT and PC
CW down the one USB cable.
Regards,
Mike VP8NO
On 01/01/2021 13:56, Rick Bates, NK7I wrote:
A generically 'bad' idea and is the reason that voice, operating system
There is, it's called a saved configuration and it's been available
since day one via the K3 Utility.
Regards,
Mike VP8NO
It might be useful to be able to save the states of all the buttons/menu
settings/etc. on the radio and easily get back to them. Being able to
switch back and forth
snow and ice.
Regards,
Mike VP8NO
On 15/12/2020 14:45, David Haines wrote:
Update:
With one-quarter of one leg of the dipole still under ice, I got a
reception report from PSKReporter on FT8 with 2 watts to Italy. That
shouldn't work, should it? Maybe the ice doesn't matter?
KD5VXH
John's original email stated:
" neither receiving nor transmitting" on 10M.
Nothing to do with propagation, I think.
I suggested to John to check which ANT was selected for 10M, and to check
CONFIG: BAND MAP to ensure 10M was active. I have not heard back from John.
- 73 and good
Maybe I'm missing something but what has all this to do with a total
lack of any TX as well as RX from the K3?
More info is required. Mode, red TX light, power setting Hi/Lo, antenna
selection.
Regards,
Mike VP8NO
On 14/12/2020 03:13, Jim Brown wrote:
That may be why you didn't hear
to use these
marvelous appliance radios.
In any event I have a MAC-200 made by SGC who make pretty darn good tuners
which I can use but that is another box to take along if I do a road trop.
73 to all
Michael, W1RC
> On Dec 12, 2020, at 6:37 PM, donov...@erols.com wrote:
> Hi Mike,
&g
Mr. Mike,
Be sure you have the KAT3 internal ATU "enabled" and not bypassed, be sure
the proper antenna is selected (ANT 1 or ANT 2) for your random wire, and
press (momentary) the ATU TUNE button. The relays will clatter a bit, and
you'll see the displayed SWR ratcheting down
What is the best way to do this? I am not familiar with automatic tuners.
TIA,
Michael, W1RC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Check your RX ANT settings to be sure that you haven't inadvertently selected
a non-existent RX antenna.
(see bottom paragraph of page 70 in the K3s User Manual).
Mike, K8CN
--
Sent from: http://elecraft.365791.n2.nabble.com
I need one more myself, if anyone has they’re not going to use.
tnx
Mike / W5JR
Alpharetta GA
> On Dec 8, 2020, at 11:20, w4sc wrote:
>
> Randy
> Contact me off list
> Ben W4SC
>
> Sent from Mail for Windows 10
>
> __
Thanks Grant and K9ZTV for the confirmation that I sorta figured it out. (hi)
Mike
Mike, Coreen & Corey
Keswick Ridge, NB
-Original Message-
From: Grant Youngman [mailto:ghyoung...@gmail.com]
Sent: December 8, 2020 5:04 PM
To: Mike Smith VE9AA
Cc: Elecraft Refl
Subject: Re: [Elec
ts. Posted below was the sale ad I bought it from.
73 Mike VE9AA
KX3 for sale serial number 1900 from a non-smoking and no pet home. The
Latest firmware installed.
The package includes the following:
KXAT3 Antenna tuner
KXFL3 Filters
KXBC3 Battery charger
KXUSB PC interface cable
KX3VFO MDKT ball b
Not so. TUNE produces a tuning signal, power set by the user. Used for
many things eg. tuning linear, external ATU.
ATU TUNE works with internal ATU.
XMIT puts the K3 into TX without any output until you either key or
apply audio, be it speech or audio output from the PC.
Regards,
Mike
escription). They are a
titch thicker than stock.
Again, for CWOps.pix came through there OK.
Mike VE9AA
Keswick Ridge, NB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
I recall reading from previous postings that the KX's have protection
from too big an audio input. Perhaps best to start at zero level from
the PC and work up.
Regards,
Mike VP8NO
On 01/12/2020 12:18, Andy Durbin wrote:
> You said you receive FT8 signals fine. If that means
The guidance Joe gives is coherent and complete and a great contribution for
interested parties. .
It takes a lot of work to get a ham radio and a jumble of external gimmicks to
do all the work of making ham QSOs...if one very generously credits FT8 as a
QSO! :-)
Mike / KK5F
-Original
QRP rig in
times of good solar activity. (I also used K1SWL's DSW-20, -30, -40 and MFJ
Cubs for 40, 20, and 15 meters...all rigs with very simple front ends. I
experienced no problems either.
FWIW, cycle 21 (peak November 1979) was my favorite.
Mike / KK5F
-Original Message-
>F
2000 has been great, except for
the radiant heat-absorbing paint job on the KX2.
Mike / KK5F
-Original Message-
>From: Alastair Bolton via Elecraft
>Sent: Nov 16, 2020 3:37 PM
>To: elecraft@mailman.qth.net
>Subject: [Elecraft] KXPD2 screws
>
>Hello,
>I’ve been offer
into the
balun.
So there are some things I still need to check. But first I want to try
getting the antenna working right.
Thanks gain.
73, Mike N4CF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Carlos,
I have just checked since the latest Win10 feature update. Spectrogram
16 is working OK on my Win10/64 Pro PC. In fact I'm watching 12m FT8
coming alive on it.
Setup is K3 with USB interface upgrade.
Regards,
Mike VP8NO
On 15/11/2020 05:39, carlos popelier wrote:
hi
doesn't reduce its output power to 10W.
Is there any way to diagnose this problem, and more importantly, to fix it?
Thanks for any and all guidance.
--
73, Mike N4CF
Louisa County, VA USA
Elecraft K3s / P3 / KPA500 / KAT500
Carolina Windom up 45'
http://n4cf.mdodd.com
201 - 300 of 6310 matches
Mail list logo