Hi Thomas,
I didn't solve it yet, but I haven't given up. I'm in Finland working at the
moment, but will be home tomorrow - I'll find and forward the email I had from
Elecraft giving some pointers about where to look.
Best regards,
Paul
24 Aug 2022 06:06:36 Tomas Bystrican :
> Hi Paul,
>
> I
On 02/05/2022 17:47, Eric Garner wrote:
I have a KX3 fully loaded (KXFL3, KXAT3, KXBC3, KX3-2M) the only one I
would skip if I had to do it over is the KXBC3. The NiMH batteries just
don't have the oomph to justify adding them for me and having the RTC
doesn't really matter to me, your needs m
Not sure if you are referring to my post from a few weeks back. When I finally
spent time diagnosing my problem, I can confirm it is doing everything as
expected, except it continually flashes 4 yellow. Based on a very helpful email
from Elecraft technical support, it is clear that something is
ll seems to be working.
Any ideas?
Many thanks!
On 17/04/2022 15:47, Paul Jewell wrote:
Good afternoon,
I have a Elecraft T1 tuner which I used last summer, but have had it
stored away for several months. Today I have been trying to use it
again with my KX3, but I am having an issue which
Good afternoon,
I have a Elecraft T1 tuner which I used last summer, but have had it
stored away for several months. Today I have been trying to use it again
with my KX3, but I am having an issue which I can't resolve. The yellow
LED is flashing continuously, as it would when selecting or dese
On 30/01/2022 04:53, Mike Morrow wrote:
The finest pure RPN (not RPL) machine ever made is the HP-42S (1988-1995). It
still brings prices above $300 on eBay and is worth it.
The owners manuals are on eBay in the UK for more than £100!!! Wow!
_
Make sure you haven't bypassed the tuner. I have this (excellent) tuner,
but I have been caught out a couple of times when the tuner has been in
bypass, and I have tried to tune. You will hear the relays when it is
tuning.
Paul / MW7PAJ
On 15/08/2021 01:00, James Bennett via Elecraft wrote:
The new rigs are wonderful when compared to how things were in say
1960 or so. There was a reason novices hung QSL cards on their wall. A
contact was an almost rare occurrence! Now we quibble over a few Hz!
Dave K1WHS
On 7/27/2021 5:09 AM, Paul Jewell wrote:
I have this behaviour on my Yaesu
I have this behaviour on my Yaesu Ft-897. If I set the CW modulation to
700 kHz, then it will move to 1.700 MHz. I thought this was "normal"
behaviour, and I was afraid to ask about it (relatively new ham). I
haven't tried to do the same on my KX3, but I will get it out and try it.
I don't thi
Explained nicely here: http://wb9kzy.com/modeab.pdf
On 07/07/2021 10:41, Jim Brown wrote:
From a guy who started in about '56 with a bug and migrated
cold-turkey to an electronic keyer in the mid-60s, and an electronic
keyer in the mid-'70s to one that would do serial numbers for
contests, WTF
regards,
Paul
On 30/06/2021 21:14, Paul Jewell wrote:
Good evening,
I am trying to find a wiring layout for the kxusb cable. I have the
wiring diagram for the kxser cable (from the amp manual), and have
tried using an FTDI adaptor with this layout. Unfortunately the
software reports that the
port is assigned.
Windows no longer adds the FTDI drivers, you must download them from
the FTDI website.
Double check your homebrew KXSER cable. Did you get the RXD and TXD
connections right?
All in all, it should work quite nicely.
73,
Don W3FPR
On 6/30/2021 4:14 PM, Paul Jewell wrote
Good evening,
I am trying to find a wiring layout for the kxusb cable. I have the
wiring diagram for the kxser cable (from the amp manual), and have tried
using an FTDI adaptor with this layout. Unfortunately the software
reports that the KX3 is not responding.
Have any of you gone down this
13 matches
Mail list logo