[Elecraft] K3/0 Mini FSK RTTY Setup Info

It took me some time to get FSK RTTY working properly with the K3/0 Mini and the Remote Rig interface. Getting it to work smoothly with Writelog was especially challenging so I decided to write up my settings and connections and pass that info along to others who might be having as much

[Elecraft] K3/0, Writelog, FSK

I am trying to use Writelog with MMTTY to operate FSK RTTY via remote using the Remote Rig RRC units and the Elecraft K3/0 to K3. I have the K3/0 Control, K3 Remote, notebook computer connected via hardware COM 5 to Control RRC COM1 and the RRC 1258 MkIIs units working fine on SSB and CW. I

[Elecraft] 100W Amp for the KX3?

I am planning to operate mobile from all 50 states in the near future. The KX3 is exactly what I have been looking for EXCEPT for the 10 watt limitation. The Elecraft KPA100 amp option for the KX3 would work great EXCEPT that it apparently won't be available until after my road trips have

[Elecraft] Remote with K3

I am setting up to remote control the K3 over the Internet. With its extensive software command set, the K3 is a great rig for remote control. However, I cannot find commands to control the level of either Microphone Gain or Compression. What am I overlooking? In addition, I had hoped the

[Elecraft] LP-Pan for K3

For Sale: Factory assembled LP-Pan for K3 with Infrasonic PCI 192 kHz Pro audio interface card and full set of interconnecting cables. Everything like new. Used maybe one hour. Looks and works perfect. $250 including CONUS shipping. Going to a high end separate SDR approach. See photos

[Elecraft] VFO A follows VFO B

After clicking on a packet spot which put the K3 in split mode with VFO B up 1 Khz I now find that pressing Rev and tuning, simultaneously changes BOTH VFOs. If I release the Rev button and tune my VFO A then VFO B simultaneously changes by the same amount. Move A up 1.1 Khz, then VFO B also

Re: [Elecraft] VFO A follows VFO B

That was it. Thanks to all who responded so quickly with the right answer. 73, Ron N6EE Lyle Johnson wrote: After clicking on a packet spot which put the K3 in split mode with VFO B up 1 Khz I now find that pressing Rev and tuning, simultaneously changes BOTH VFOs... Press the SUB button.