This link may be of interest to many who have recently been debating a new
SDR...it was recently made available to another group I belong to. I'm keeping
my K3 but looking forward to purchasing one of these puppies too. I'm sold and
the price point is perfect.
On 4/29/16 4:07 PM, Tom wrote:
Hello,
Murphy’s law has struck. The new release does not work correctly but the
issue has been identified. The replacement will be up later this evening.
Sorry for the inconvenience.
73 Tom
__
Elecraft
Hello,
Murphy’s law has struck. The new release does not work correctly but the issue
has been identified. The replacement will be up later this evening.
Sorry for the inconvenience.
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
it in action here: https://www.youtube.com/watch?v=htVlc9x0IoU
and download a free 30 day evaluation at http://va2fsq.com/?page_id=379
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
I have two K3S connected to two Acom 200A. I am using the USB interface to
the computer and running Writelog and Wintest. The P3's are connected via
the special Y cable on the RS232 interface.
Has anyone successfully managed to control the Acom 2000A with the K3S?
Please share!
Tom Taormina
Heath DX-60= Model A
On 4/26/2016 8:48 PM, Chris Tate - N6WM wrote:
Maybe apples and oranges is not the best comparison.. how about this
Elecraft K3s = Porsche
Flex 6000 = Tesla
IC-7300 = Nissan Leaf
Kenwood TS-590 =Toyota pickup
~C./WM
-Original Message-
From: Elecraft
Hi,
Is there an option somewhere to enable the KX3 to have different power levels
per band? This would be very useful if you are driving a big amp via the
KXPA100.
Is this planned for a future firmware update?
Thanks, Tom
va2fsq.com
---
This email has been checked for viruses by Avast
d it again.
Advice, suggestions welcome.
Tom
KN6DR
On Sat, Apr 16, 2016 at 5:29 PM, Tom Field <docw...@gmail.com> wrote:
> I'm having difficulty getting more than about 70 to 80 watts out of the
> KXPA 100. I have it connected to a KX3 with the Elecraft cable and have
> gone through
procedure on 40 meters,
It appears to show a drive level of 5 watts to achieve 75 watt output.
If I transmit into a dummy load, with the power setting at 100 watts,
I have a drive power of about 2.6 watts and an output power of about 70
watts as shown in the KXPA Utility.
Am I missing something?
Tom
switch on my Diamond power supply - K3 power on
automatically.
Some shots made by mobile You can have a look on vimeo:
https://vimeo.com/162290764
I will be grateful for any comments / tips
Tom
SQ5CSF
__
Elecraft mailing list
Home
Don,
Agree wholeheartedly, when home I connect up to a Rigrunner hanging
downstream off a 35A power supply.
I was looking for something small (portable) to toss in a travel bag when
on vacation.
Tom
On Tue, Apr 5, 2016 at 11:34 PM, Don Wilhelm <w3...@embarqmail.com> wrote:
> I
Anyone happen to know power consumption of the KX3 when running at the
relatively new 15W RF output setting?
I had read a while back that it was around ~2.1A at 10W. Looking at tiny
power supply options and don't want to underrate.
Tom, W2YF
.
There is a free 30 day trial available at va2fsq.com. If you have tried it in
the past and would like to try it again please drop me an email for an
evaluation extension.
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
Hi,
I though I tried this! Yes that does it. Brings it up to a value of 6.
Thanks!
-Original Message-
From: Don Wilhelm
Sent: Saturday, March 26, 2016 11:06 AM
To: Tom ; Joe Subich, W4TV ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Mic setting of 2 is too high
Hi,
The MIC SEL is front panel, Hi Bias. I have tried all combinations too.
Tom
-Original Message-
From: Joe Subich, W4TV
Sent: Saturday, March 26, 2016 10:48 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Mic setting of 2 is too high? and a setting of
1 is too low
?
Thanks, Tom
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
is going to be narrow and tuning can
be a pain without a good ATU. Cannot imagine life without one when doing
portable stuff with compromised antennas... I'd spend all day tuning up...
Tom, W2YF
On Thu, Mar 24, 2016 at 10:21 AM, Bruce Nourish <w0...@w0mbt.net> wrote:
> Most of the electric
to be
cradled on so all that weight of the telescopic whip doesn't damage the
jack...
Can't wait to take this down to the shore in a few weeks and see what it
can really do without all the disadvantages I've placed on it tonight
:-)
Tom, W2YF
On Wed, Mar 23, 2016 at 10:12 PM, Wayne Burdick
Hi,
Normally I see my posts but today it’s been several hours and it seems perhaps
the [DEV] mailing list is down?
Thanks
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
Elecraft mailing
Hi
SWH40 will select text decode. Then 5 DN; commands to bring it to auto.
Then 3 UP; commands to bring it to three.
73 Tom
va2fsq.com
-Original Message-
From: KC6CNN
Sent: Friday, March 18, 2016 12:07 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Macro to adjust THR
I
Yes, The DEV reflector is definitely not working correctly. My ISP strongly
denys that they are filtering traffic from there.
I have only received ONE email from the list since yesterday.
73 Tom
-Original Message-
From: Mike K2MK
Sent: Thursday, March 17, 2016 5:32 AM
To: elecraft
reviews
here:http://www.amateurradio.com/win4k3suite-added-to-shack/
You can see some videos of Win4K3Suite in action here:
https://www.youtube.com/results?search_query=Win4K3Suite
There is a 30 day trial available at va2fsq.com
73 Tom
---
This email has been checked for viruses by Avast antivirus
I’ve looked at the L-pan site and they recommend the ASUS USB sound cards.
Reviews on Amazon and NewEgg are pretty negative. What are the group’s
recommendations for a USB sound card interface with the K2 and KkX3:
Tom
KN6DR
Hi,
Eltima makes a serial port monitoring program. It's not free but there is a
free 30 day (I think) trial.
Tom
va2fsq.com
-Original Message-
From: brian
Sent: Monday, February 22, 2016 2:19 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] OT- serial port spy program
Trying
Where do I find the Elecraft Reflector?
It seems to have been lost in the dust.
> To: elecraft@mailman.qth.net
> From: n...@contesting.com
> Date: Mon, 22 Feb 2016 08:50:15 -0500
> Subject: Re: [Elecraft] OT: CW Contest logging question
>
> Can this thread please go back to CQ-Contest where
and select edit, a small window will show up
with only that message. You can change it quickly at this point. Much
faster.
Thanks for all your support.
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
"I'm dismayed by much of what I hear on 75. I think one of the best behaved
bands is 17." Bob
Many of the same colorful characters on 75m make regular appearances on 40m &
20m as well. Fact is, IMO of course, I hear the "stuff" on every band & the
local repeaters. The hobby just isn't what
(having one of THOSE days).
__
Clay Autery, KG5LKV
MONTAC Enterprises
(318) 518-1389
On 2/12/2016 7:03 AM, Tom wrote:
Hello,
There is a new release of Win4K3Suite. This release adds a number of
usability enhancements for the K3, K3S and KX3 which include:
One button syn
options I should get with the K3s kit.
Thanks for your help!
-Tom
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Thank you everyone!!
I received many replies on what to purchase, what options, used, new, etc..
I have a lot to go through now, I'm very glad you all took the time to give
me so many ideas!
I wasn't expecting such a great response, hams are the best!
-Tom
day trial at va2fsq.com
73 Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Don,
Wasn't the KIO3B code added at firmware level 5.x?
If so, not sure the K3 knows anything about the USB setting unless it is
polling those settings directly from the board itself.
Tom (W2YF)
On Tue, Feb 9, 2016 at 7:29 AM, Don Wilhelm <w3...@embarqmail.com> wrote:
> Rob,
>
&
Welcome aboard, Clay! Congratulations on your achievement
Tom , WB2QDG
K2 #1103
On 2/9/2016 10:57 AM, Clay Autery wrote:
As of sometime yesterday, 02/08/2016, I was granted my Amateur Radio
License with General privileges.
Thank you to everyone who had a hand in making this possible. I am
Sure. Try:
https://www.youtube.com/watch?v=cx3ZeI3FlHk
Tom, W2YF
On Wed, Feb 3, 2016 at 5:01 PM, Barry N1EU <n1eu.ba...@gmail.com> wrote:
> Do you have a link to a youtube video showing a phone waveform? The only
> video I come up with is https://www.youtube.com/watch?v
Out on youtube if you search for "P3 TXMON" you'll find a couple of short
(1 min video) of an operator showing a SSB and CW envelope on a P3 with the
TXMON option installed.
Tom, W2YF
>>>
>>> On 2/3/2016 8:26 AM, Barry N1EU wrote:
>>>
>>>&g
port cable is not
connected to the K3.
If it is the issue, call up Elecraft. They will probably suggest the same
thing as on the KX3.
73 Tom
va2fsq.com
-Original Message-
From: Mike Weir
Sent: Monday, January 25, 2016 10:44 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Faint
ece. This should work in 1.5.x and 1.6.
Tom (W2YF)
On Mon, Jan 25, 2016 at 11:52 AM, Ian <ik7...@verizon.net> wrote:
> I have a single USB cable between the K3S and the laptop and no problem
> decoding JT65 signals with DATA A. "CAT Control" is set for COM4 and
> 38
Hi I use a Weller WES51. You can get it and all accessories at digikey
73 Tom
va2fsq.com
-Original Message-
From: Mark Petrovic
Sent: Saturday, January 23, 2016 10:11 PM
To: elecr...@qth.net
Subject: [Elecraft] Soldering station recommendation in preparation
forbuilding a K1
Hi
When will the "new" VFO-A dial knob be available for purchase?...and price
for the knob/rubber ring? I didn't see it listed in the K3S's product dept.
73
Tom/K1TL...
__
Elecraft mailing list
Home: http://mailman.qth.n
still be used with seamless integration. In
addition, Win4K3 has now been tested with HamPod for those with accessibility
problems.
You can see it in action here:
https://www.youtube.com/results?search_query=win4k3suite
There is a full featured 30 day trial as well.
73 Tom
va2fsq.com
sure the SVGA display for decoding is off or
Win4K3's terminal is closed.
That should take care of it.
73 Tom
va2fsq.com
-Original Message-
From: KC6CNN
Sent: Friday, January 08, 2016 7:11 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 and K3 Untility software - Terminal
Hello
Strangest thing! This morning I went down to the radio which was on all
night on CW and I switched it to LSB to further trouble shoot the problem,
but it's gone! No more issues!
ANy ideas???
-Original Message-
From: Nr4c
Sent: Wednesday, January 06, 2016 8:55 AM
To: Tom
Subject: Re
.
If I turn AGC on, it goes away. If I turn it off, it comes back. Anyone have
any ideas?
Thanks, Tom
va2fsq.com
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
Elecraft mailing list
Home
Hi,
The NR and NB is off, and VOX is set to about 30. But there is no mike
attached or line-in.
va2fsq.com
From: Mike Flowers
Sent: January 5, 2016 10:45 PM
To: Tom
Subject: Re: [Elecraft] [Elecraft} K3 keeps going into transmit mode on 80m SSB
Hi Tom,
Just shooting in the dark here
Hello,
I've been running my remote base K3 using HRD attached to a pair of
remote rigs. I would like to find a used K3/0, either the mini or the
full size one.
Email me direct please.
Thank you
Tom K8TB
__
Elecraft mailing list
Ah Amsterdam...been there on three occasions spending at least 10 days each
trip...hm...attending a conference there wasn't on our agenda though. Beautiful
city (the old part of the city) & a wonderful playground for adults :),
wonderful museums and oh those delicious coffee shops. The Dutch
Thanks Eric.
That price works for me. Will let my simplify my set up and use a new
computer without a older RS-232 serial port.
73, tom w7sua
On 12/19/2015 1:50 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Hi Olli,
Yes, 389.95 is the correct price.
[snip]
73,
Eric elecraft.com
"The Buckmaster never wins compared to inverted vees though, but it DOES tune
up on multiple bands. It and the Elecraft tuner get along fine, so it serves
its purpose (which is NOT high performance)."
Whaaa? The Buckmaster is recommended to be installed as an
inverted V.
7-band, no tuner required, Buckmaster OCF dipole...except no substitutes. Built
like a tank's tank. Mine has been up for years thru high winds (100mph+), ice
storms as well as asteroid & comet impacts. Very low to flat SWR on all bands
that it's designed to operate on. Great signal reports
Hi,
That's very typical. The P3 or LPPAN for that matter will not always show
real weak signals. The waterfall as opposed to the spectrum can be more
useful here. Also, averaging,set high will help dig out the signals.
73 Tom
-Original Message-
From: Ken
Sent: Friday, December 04
to connect to the radio simultaneously
with the radio control capabilities. HRD, DXLabs, Logger32, WriteLog, N1MM+,
FLDIGI, and any other package out there is supported seamlessly.
You can download a fully functional 30 day demo at va2fsq.com
73 Tom
---
This email has been checked for viruses
does
that work? Not sure adding more software is the answer.
Tom Taormina, K5RC
Comstock Memorial Station, W7RN
Storey County ARES, KS7AA
<http://www.w7rn.com> www.w7rn.com
From: Tom [mailto:tom...@videotron.ca]
Sent: Tuesday, November 24, 2015 7:13 PM
To: t...@k5rc.com
Subject: RE: [El
for the P3. But how can I communicate
with the Acom?
Gotta figure this out before I have three K3S talking to three Acom 2000A's
and three P3's!
Tom Taormina, K5RC
Comstock Memorial Station, W7RN
Storey County ARES, KS7AA
www.w7rn.com <http://www.w7rn.
Hi,
You’d think I’d know the radio by nowToday I wanted to answer a DX on 12m
at 24960 up 5. Put the radio in split and went to transmit. No output. Tuned
off split to test, no problem. Tried this on other bands, no problem. It’s
just on 12m! Anybody know what’s up?
Thanks, va2fsq
repaired at Elecraft. It is
immediately available. No trades. No haggling. W7RN is a not for profit
foundation subject to a chain of approvals.
Tom Taormina, K5RC
Comstock Memorial Station, W7RN
Storey County ARES, KS7AA
www.w7rn.com <http://www.w7rn.
to use all of the features of your favorite software with an enhanced
control capability.
You can see the software in action here:
https://www.youtube.com/results?search_query=Win4k3
If you have evaluated the software in the past and wish to try another
evaluation, please contact me off list.
73 Tom
o:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.q
in the whole k3 command set.
73 Tom
va2fsq.com
Sent from BlueMail
On Nov 8, 2015, 12:27 AM, at 12:27 AM, Tom <tom...@videotron.ca> wrote:
>
>
>Sent from BlueMail
>
>
>
>On Nov 7, 2015, 11:03 PM, at 11:03 PM, KC6CNN <kc6...@gmail.com> wrote:
>>I am trying to create
m hesitant to try it:
http://www.amazon.com/dp/B00425S1H8/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8=2BU7MNUYG3YU2=I1591SJBBKODFX
Thanks for your help with this,
Tom, WB2QDG
K2 #1103
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
Some of you may belong to several groups that correspond to the different
radios you may own, I do. I own an Icom 756 Pro 3 and belong to that group as
well. Recently I've noticed an individual posting a 7800 for sale on both the E
Reflector as well as this group's site. What I find interesting
in the win4k3 manual.
73, Tom
va2fsq.com
Sent from BlueMail
On Oct 17, 2015, 8:15 PM, at 8:15 PM, Ed via Elecraft
<elecraft@mailman.qth.net> wrote:
>What is " comocon " and why would I need it with NaP3 and my KX3 just
>to
>view the spectrum?
>
>
>
>
this in the past and would like an additional trial please contact me off
list.
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Elecraft K3/100 factory assembled transceiver for sale. This radio is serial
number 3494 and is in absolutely flawless condition, not even the slightest
blemish and it comes from a smoke free, pet free, kid free & climate controlled
environment. It's been kept under a dust cover from day one as
For those of you using Win4k3Suite, you can export most menu and tech mode
settings as well as operating parameters to a file. This file is an XML file,
and can be opened in notepad and printed.
Not the most fancy presentation but it does provide a hard copy.
73 Tom
Sent from BlueMail
On Oct
functionality that replaces
lpbridge, and it uses com0com only as a connector.
73 Tom
Sent from BlueMail
On Oct 13, 2015, 1:39 AM, at 1:39 AM, Barry LaZar <k3...@comcast.net> wrote:
>Don,
> If all that is required is a port replicator, I'd suggest com0com.
>It works quite well
Win4k3 is alive and well
I had to remove my account from YouTube since it was hijacked.
There will be new videos soon.
Tom
va2fsq.com
Sent from BlueMail
On Oct 13, 2015, 11:30 AM, at 11:30 AM, ae...@carolinaheli.com wrote:
>Oops.. I just thought it was dead because all of the vid
functions. In addition, almost all menu items can't be decoded.
73 Tom
va2fsq.com
Sent from BlueMail
On Oct 12, 2015, 12:46 PM, at 12:46 PM, Jerry Moore <je...@carolinaheli.com>
wrote:
>+1 on HRD support in LP-Bridge
>
>Jerry Moore
>CDXA, INDEXA, SKCC, Fists
>AE4PB, K3
_
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list:
Fascinating what kind of off topic crap is tolerated on this reflector while
other posts are simply censored & censored as in never posted. It reminds me a
bit of when one of the right wing whack-a-doodle AM talk hosts mistakenly
allows a listener with a brain through the screen and puts them
Hi
Google for hidden devices in windows device manager and follow the directions
to clean up your serial ports. Once done, plug the cable into the computer and
check which comport it is.
73 Tom
va2fsq.com
Sent from BlueMail
On Sep 25, 2015, 3:47 PM, at 3:47 PM, Byron Peebles <n...@arrl.
"We have hit the point where we will be increasing prices slightly on a number
of our products by about the middle of October."
Hm...again eh? Seems like everything is going up except wages for the American
worker. Seems they stopped going up about inauguration 1980 & that gap just
started
a delightful lunch with excellent food --
another real treat. What a delightful experience and wonderful host -- both my
wife and I had an experience that we'll long remember. Mille Grazie, Franco.
Thanks to all
73,
Tom K4AEN
N1LQ-Dave...this is starting to remind me of the Apple iPhone drama...about
every 6 months a new iPhone comes out that's "better" than the previous one.
Sorta makes you wonder why they just didn't make the damn thing that way in the
first place, I think we all know why. I've owned all the
I have both radios..bought both new...I'd advise you to keep your Pro III & add
a K3 or K3s but if that's not an option then I would say keep your Pro III &
wait a bit longer for the inevitable "next incarnation" of the K3...possibly a
K4. I think you will find that you will miss your Pro III
the
software in action here:
https://www.youtube.com/results?search_query=va2fsq
The software has a fully functioning 30 day trial which you can download at
va2fsq.com. If you have
evaluated the software in the past and would like another evaluation code,
please feel free to contact me.
73, Tom
Hi
I believe that Elecraft has provided that for a "future" feature that can
give the actual XY data appearing on the scope in ASCII.
This could be useful for remote panadapters. The feature is not yet in the
firmware.
73 Tom
va2fsq.com
-Original Message-
From: Nr4c
Sent
brotherhoodboth
the ham radio brotherhood and the Elecraft brotherhood. Thanks, Franco, for
the very kind invite and look forward to seeing you Thursday.
73
Tom
K4AEN
Sent from my iPhone
__
Elecraft mailing list
Home: http
I was planning to take my KX3 to Italy next week on vacation, but a
consideration of import duties gives me pause. Does any have knowledge on the
legalities?
Thanks.
Tom
K4AEN
Sent from my iPhone
__
Elecraft mailing list
Home: http
Maybe you put the K3 in split mode?
Tom wa4ta
To: elecraft@mailman.qth.net
From: vetteresto...@gmail.com
Date: Thu, 27 Aug 2015 12:08:39 -0700
Subject: [Elecraft] K3 Mic LED Orange
Hello All:
I just installed the DVR in my K3 and now the LED above the mic control
is orange
://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http
Hi,
I'm happy to report that all functions seem to be good on the SVGA.
Averaging now works correctly, noise blanker as well, and the Y axis now
rounds out at 10 dBm instead of 9.
All functions appear to work from the API as well.
73 Tom
va2fsq.com
-Original Message-
From: Steve
?search_query=win4k3suite
Thanks, Tom va2fsq
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
?search_query=win4k3suite
Thanks, Tom va2fsq
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Having gotten the side tone situation sorted out, I now find I have no
power going to the KAT 100.
I've checked the plug and voltage on D4, R12, and R11. There appears to be
nothing getting through Q1, I have no voltage on the collector and no
voltage on U8. Bad Q1?
Tom
KN6DR
. Zero
flashy and outstanding performance. Great when the flashy high end
radios cost much more and had much poorer performance. Since then have
picked up a KX3, PX3, and KXPA100 with tuner.
73, tom w7sua
On 8/3/2015 5:59 AM, Jerry Moore wrote:
Just asking. It's a lot of money but appears
? I
couldn’t see the audio oscillator in the schematic.
Tom
KN6DR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
to the P3.
73 Tom
From: Guy Olinger K2AV
Sent: Monday, August 03, 2015 5:39 PM
To: Tom
Cc: Dan Maase AC6DM ; Elecraft Reflector
Subject: Re: [Elecraft] P3 - still in trouble with new firmware
Will add my name to list about no NB on SVGA. I didn't know that was supposed
to be working
on the SVGA, and the per band settings of the noise blanker are not updated
on the SVGA display as you change bands.
I guess there should be another iteration?
73 Tom
va2fsq.com
-Original Message-
From: Dan Maase AC6DM via Elecraft
Sent: Monday, August 03, 2015 4:43 PM
To: elecraft
I have tried the various configurations shown in the Acom 2000A manual to
connect the CAT input on the Acom to the RS232 Connector on the K3. Using a
Y cable and their pinout takes down the RS232 between the radio and
computer. Anyone been successful at this?
Tom Taormina, K5RC
Comstock
some AM broadcast transmitters operated Class
E. Clearly not linear.
73, tom w7sua
On 7/26/2015 9:32 PM, Alan wrote:
CW would be another mode that would not need a linear amp I think.
No, CW requires a linear amplifier. CW is not constant-amplitude - the
amplitude changes every time you
, tom w7sua
On 7/27/2015 5:13 PM, Jim Brown wrote:
On Mon,7/27/2015 4:57 PM, Tom Azlin W7SUA wrote:
In all the old handbooks the discussion of amplifier design says (
page 76, 1941) In amateur transmitters, and r.f. amplifier is
invariably operated Class C ( see Chaptr 3). I though the final tuned
OK on all the thread.
Ed, Yes, I am interested in following your linear amplifier project.
73, tom w7sua
On 7/27/2015 10:43 AM, Edward R Cole wrote:
To catch up on the comments I address all that I have so far:
Re: linear vs class-C is really a moot point as its easy enough to build
a linear
, tom w7sua
On 7/26/2015 5:43 PM, Alan wrote:
On 07/26/2015 05:32 PM, Don Wilhelm wrote:
Soundcard sourced digital modes are really SSB signals and need a linear
amplifier.
The one exception might be FSK. It is constant-amplitude so a class C
amplifier should be fine.
FSK modes include RTTY
Not if you build your own is my understanding!
73, tom w7sua
On 7/26/2015 5:56 PM, dave wrote:
Do we run into the FCC external amplifier 15 dB gain limit here?
73 de dave
ab9ca/4
On 7/26/15 7:51 PM, Joe Subich, W4TV wrote:
Don,
WSPR, JT65 and JT9 are (1 of N tone) FSK modes
Hi Ed.
I am more interested in a non-linear class C or higher amp for those
bands as was not thinking to run modes that need a linear amp. WSPR, a
WSJT mode, WSQ, and the like.
73, tom w7sua
Chino Valley AZ
On 7/26/2015 1:23 PM, Edward R Cole wrote:
With the recent expansion of use to 630m
for a trial extention.
73 Tom
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
nugget, go to QRZ or eHam or any other place
folks throw every passing though out for comment.
I will go back to my hole now and get my delete key ready :)
Tom NY4I
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
On Jul 16, 2015, at 3:57 PM, Lynn W. Taylor, WB6UUT
k
of general interest to hams.
This is Internet 101 stuff.
Tom NY4I
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
But it has nothing to do with Elecraft. Shouldn't that be the test before
someone posts? Otherwise you're just abusing a captive audience.
Tom NY4I
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
On Jul 16, 2015, at 2:46 PM, Scott Manthe scott.man...@gmail.com
, is this sufficiently out
to be of concern? and question 2, what are the next steps to correct any
problem?
Tom
KN6DR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
501 - 600 of 3044 matches
Mail list logo
