With regard to current info on the KX3, there is a very active and worldwide
group on facebook. Always lots of feedback.
Sent from my iPhone.
> On Jul 18, 2024, at 7:12 AM, elecraft-requ...@mailman.qth.net wrote:
>
> Send Elecraft mailing list submissions to
>elecraft@mailman.qth.net
>
>
http://www.arrl.org/news/arrl-systems-service-disruption
On or around May 12, 2024, ARRL was the victim of a sophisticated
network attack by a malicious international cyber group. ARRL
immediately involved the FBI and engaged with third party experts to
investigate.
This serious incident
Elecraft SP3 Speaker for sale. Very clean. Shipping included. Pics available.
$185 firm. Continental US only. Please contact Alan Geller …
k6...@arrl.net.
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net
Sent from my iPhone
This issue is a real salute to the Elecraft Net . Submissions from
knowledgeable folks who wanted to help. Some mild disagreements to be worked
out without any snarky comments and a lot of good information and help. Hooray
for Elecraft products and customers.
The K3's IF OUT bandwidth is limited only by the front-end RF filters so
it covers an entire amateur band, plus. That is handy for a panadapter
because it is always centered on the VFO A frequency. The IF center
frequency is 8.215 MHz.
Alan N1AL
On 3/9/2024 11:04 PM, Fred Jensen wrote
os and info at https://wilcoxengineering.com/sales
Any questions, feel free to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K3S-10457, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Commen
My "K3(S)/P3 Excellent Example” just sold. Happy result for buyer and seller.
My XYL just
Gave the thumbs up to buy my K4D. As this stage in life, no room for duplicates
in the house.
Thanks for all queries; some folks looking only for K3 dual receiver
example…..THATSA RADIO!!
Alan/
information please visit <https://hamfest.w5qgg.org/>.
73, Alan N5NA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
For Sale: K3(S)/P3. - K3 with nearly all (S) options in excellent condition.
Very clean P3
K3 (S/N 4757) upgrades:
a. KTCXO3-1 1ppm txco
b. KSYN3AUPG Syn Board u/g
c. KXV3B. I/O U/G
d. KIO3BUPKT. I/O u/g
e. K5PF3/K5LSA-6K Gen cov + AM
Is speaking to me.
So, I even think this is a dumb question, but if the std “video” port on the
back panel of the K4 can
Use a std cable to a TV set vs a “Monitor”, does the basic digital video
mirror the front panel display?
Thanks for any help.
Alan/K6ADG
questions, feel free to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K3S-10457, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Wi
Greg, did you set CONFIG:RS232 to USB?
Cheers, Alan
Alan D. Wilcox, W3DVX (K3S-10457, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Williamsport, PA 17701
On 1/11/24
"W3DVX Rescues Legacy Elecrafts"
Hello,
Selling a FLEX-6400 and an iWatch plus the LPA and two KSYN3 boards.
See photos and info at https://wilcoxengineering.com/sales
Any questions, feel free to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wil
And the line was completed while the Civil War was raging. Amazing!
Alan N1AL
On 11/21/23 13:43, Wayne Burdick wrote:
I highly recommend this fascinating first-person account. You might want to
skim over the parts about political infighting to get to descriptions of the
route, procurement
"W3DVX Rescues Legacy Elecrafts"
Hello,
Selling several extra K3 boards: the 10W Low-Power Amp (LPA) and two
KSYN3 boards.
See photos and info at https://wilcoxengineering.com/sales
Any questions, feel free to call or text 1300-2000 Eastern.
Cheers,
king about their
spark transmitters. :-)
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://w
.com/sales
Any questions, feel free to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K3S-10457, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
William
Thanks Jim. Unfortunately I'm several thousand miles away from home so
I can't do that test right now. I'm pretty sure it's an electret, but
I'll check when I get home.
Alan N1AL
On 8/7/2023 11:00 PM, Jim Brown wrote:
On 8/7/2023 12:44 PM, Alan Bloom wrote:
I also use it for recording
doesn't have as good bass response as the mic I used to use.
Alan N1AL
On 8/7/2023 7:46 PM, Larry Martin wrote:
I purchased a CM-500 over 10 years ago when I first got my K3. K3 is still
going strong but the headset died a couple of years ago and has since been
discarded. I've read several
laptop to record a radio show. I had to
turn up the gain close to max on the computer as well. I think
late-production CM-500s just tend to have low microphone sensitivity.
Alan
On 7/31/2023 1:40 AM, Oscar Staudt wrote:
When I got my K4D a month ago, I unplugged my Yamaha CM-500 mic
omplicated, but it's what you have to do if you really
want to protect your site. Of special interest are Chapter 4 "External
Grounding (Earthing)", Chapter 5 "Internal Grounding (Earthing)", and
Chapter 7 "Surge Protective Devices".
Alan N1AL
On 7/28/2023 10:31 P
s all know!
Thanks for writing.
Alan
Alan D. Wilcox, W3DVX (K3S-10457, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Williamsport, PA 17701
On 7/2/23 13:53, Francis Cumming
attended. I was surprised to see a fair amount of old Collins gear -
e.g. a complete Collins S-line in very good condition for 1600 Euros. I
noticed a lot more microwave equipment and parts than is usual in the
US. I think that microwave operation is more common in EU.
Alan N1AL
ee to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3S-10457, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Williamsport
ftware and manual on memory stick. $100 plus
shipping
No.1 usually needed to feed no.2
Pics available if needed
Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.ht
which is also equivalent for the more common
Term “48 volt ghost voltage”
Thanks for any help
Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
sales page.
Scroll down a bit on the sales page for Nikon D5100 camera kit and also
David Clark aviation headset.
See details and photos on my site at
https://wilcoxengineering.com/sales
Any questions, feel free to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373,
It's the MENU:CenterEn function. When OFF, the center key does not
adjust the center frequency when in tracking mode.
Alan N1AL
On 4/25/23 08:06, ROBERT GARCEAU wrote:
When i press the Center button on my P3, I get a "center key disabled" message.
I have been trying to find t
There's no reason the P3 can't display it if you have a way to generate
the trapezoidal pattern from the transmitter. I think feeding a
triangle wave from a function generator into the mic input would do it.
Alan N1AL
On 4/19/23 16:38, Fred Jensen wrote:
and I'd buy one if it would do
, use the equation:
P(ref) = P(fwd) * [(SWR-1)/(SWR+1)]^2
Since the K3 and K4 already have a built-in wattmeter located before the
tuner, it makes sense to me to put the P3 sensor (or external wattmeter)
after the tuner so you can see what is going on with the antenna.
Alan N1AL
On 4/10/23
or design at
one point but it was just a capacitor change to improve the detected
bandwidth so the envelope would display correctly. (The same sensors
are used for the W2 wattmeter.)
73,
Alan N1AL
On 4/7/23 12:12, Dave New, N8SBE wrote:
So, I was the guy that had a P3 display/boot pr
sales page.
Scroll down a bit on the sales page for Nikon D5100 camera kit and also
David Clark aviation headset.
See details and photos on my site at
https://wilcoxengineering.com/sales
Any questions, feel free to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373,
Hiram Maxim, inventor of the Maxim machine gun, was the father of Hiram
Percy Maxim, a founder of ARRL:
https://news.yahoo.com/ukraines-troops-fight-off-massive-214437031.html
Alan N1AL
__
Elecraft mailing list
Home: http
.com/sales
Any questions, feel free to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3S-10457, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/a
t location.
The old joke that a vertical is an antenna that radiates equally poorly
in all directions is only true if you have a poor radial system.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/ele
ll or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-6755, K3S-10457, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Williamsport
then moving the
power-on jumper to "always on" should force the P3 to stay on.
Alan N1AL
On 2/26/23 12:22, Dave New, N8SBE wrote:
Alan,
Before I got the chance to look into your idea of possibly bad display
connection,
I DID reload a saved configuration into the P3 using the P3 Uti
techs
handle it.
Alan N1AL
On 2/24/23 10:51, Dave New, N8SBE wrote:
Mike,
Thanks for the idea! I hadn't considered that mitigation.
Anyone else have ideas for a permanent corrective action?
73,
-- Dave, N8SBE
On 2023-02-24 09:13, Mike Flowers wrote:
Hi Dave,
If you have a way of sending
On 2/17/23 14:14, kevin via Elecraft wrote:
If you want to copy and paste from the web it helps to add another
step to the process.
Paste the selected text into a text processor such as WordPad on a
Microsoft system or gedit on a Linux system. Then copy the text
again. This will
On 2/17/23 12:48, Dave New, N8SBE wrote:
Alan,
For starters where are all the spaces? :-) Makes it hard to read,
that's for sure.
That's weird. The spaces were there in the sent message - they somehow
disappeared in the reflected copy.; Let's try again
e
"sounds" very authoritative, but see if you can spot all the errors. :=)
Alan N1AL
CompareanElecraftK3withanElecraftK4.
TheElecraftK3andElecraftK4arebothhigh-endAmateurRadiotransceiversdesignedforperformingradiooperationsinboththeHFandVHF/UHFbands.TheK3isthepredecessortotheK4,b
g it.
Any questions, feel free to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, K4D-384, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/a
Some would argue there's no activity in ham radio, or perhaps life
itself,
more rewarding than making RTTY contest QSOs using a 1 pound radio with a
whip and an attached keyer paddle
You mean I no longer need my 75-pound Model 15 Teletype machine to
send/receive RTTY?
:=)
Alan N1AL
On 2
Some would argue there's no activity in ham radio, or perhaps life itself,
more rewarding than making RTTY contest QSOs using a 1 pound radio with a
whip and an attached keyer paddle
You mean I no longer need my 75-pound Model 15 Teletype machine to
send/receive RTTY?
:=)
Alan N1AL
On 2/5
eering.com/sales
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, K4D-384, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
tmas sales at
https://wilcoxengineering.com/2020/06/09/selling-extra-equipment/
Happy Holidays,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, K4D-384, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
__
Elecraft mailing
repair? Tuneup?
Want to sell, but it needs some attention before offering it for sale?
See what my clients have said about my construction and service work at
http://www.eham.net/reviews/detail/6768
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, K4D-384, SKCC 22955)
570-916-959
Tuneup?
Want to sell, but it needs some attention before offering it for sale?
See what my clients have said about my construction and service work at
http://www.eham.net/reviews/detail/6768
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, K4D-384, SKCC 22955)
570-916-959
Yea Wayne, thats the terrific Elecraft attitude that keeps your customer base
strong and loyal.
Its called, “ lets all have fun and learn something” Hooray for the serious
high speed ops, a
Lot of ex Navy guys, but its pretty easy to spot the slow lane and ease back
into the fast lane.
Happy
n.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, K4D-384, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Williamsport
ent/
Any questions, feel free to call or text 1300-2000 Eastern.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, K4D-384, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Wi
http://www.eham.net/reviews/detail/6768
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, K4D-384, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
Williamsport, PA 17701
__
Elecraft mailing list
Home: http://mai
came
standard with a 500 Hz crystal filter. With the external HG-10 VFO you
had separate stable transmit and receive VFOs so working split was not a
problem.
Alan N1AL
On 7/3/22 14:54, Mike Morrow wrote:
I don't know what an HW-16 is.
The HW-16 is a vacuum tube, 90-watt (maximum) input
Mission accomplished ... I just unpacked and installed my new K4D
beside the K2 and K3.
Many thanks to all for the help and encouragement.
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955)
570-916-9590 (cell, text)
On 6/20/22 16:36, Alan D. Wilcox wrote:
Hello,
Considering adding a K4
hase. In this P3 this is done in an ASIC
(application-specific IC) and in the K4 it is done in an FPGA.
Alan N1AL
On 6/22/22 20:45, Julia Tuttle wrote:
Mike,
I think you're right that SDRs that digitize at a zero IF (like the KX3)
need I and Q channels to distinguish the AF sidebands. That is, if t
racle" K4,
Bill! :)
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
On 6/20/22 17:54, Dr. William J. Schmidt wrote:
With more K3 radios broken on the
Hello,
Considering adding a K4 to my shack, but not keen on the Elecraft
expected-delivery time.
Write or text me if you have one for me.
Thanks,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews
On mine, the fan comes on briefly when the power supply is first turned
on and then turns off. It comes back on again if it starts to get hot.
I just confirmed that by transmitting 100W into a dummy load for 2 minutes.
Alan N1AL
On 6/13/22 23:31, Walter Underwood wrote:
Are the fans
Dein Englisch ist viel besser als mein Deutsch!
On 6/10/22 15:44, df...@darc.de wrote:
Or this. While vacuuming it’s recommended to block the fan so it cannot rotate.
In some cases, when the blades are driven bei the airflow too fast, the fan
works as a generator and sends some voltage into
e about S6 on the ground-mounted trap
vertical at my house and they are almost buried in the noise when the
band opens up at night. So I'm not going to bug the neighbor about it.
But I bet they would have trouble trying to listen to AM radio at their
house.
Alan N1AL
On 6/7/22 17:21, Alan Bloom wrot
KX2 pedestrian mobile and walk around the
neighborhood to see if the signal level changes.
Alan N1AL
On 6/7/22 19:36, jerry wrote:
On 40M I see noise every 15 kHz. It's constant. Sometimes stronger,
sometimes
weaker, but it's always there. The pattern is obvious on the
waterfall display
was turned off when I threw the main breaker
to the house. I assume it could be caused by Internet from some
neighbor, but as I said, the nearest neighbor's house is about 150 feet
away and all services are underground.
It's a puzzlement...
Alan N1AL
On 6/7/22 19:23, John Oppenheimer wrote:
Hi
, the
spurs are still there. There is no wired connection from the K4 or the
desktop computer to the LAN (Wi-Fi only).
Alan N1AL
On 6/7/22 18:29, John Oppenheimer wrote:
Hi Alan,
What is your TV/Internet provider?
John KN5L
On 6/7/22 6:59 PM, Alan Bloom wrote:
The weird thing about these spurs
The weird thing about these spurs is how clean and stable they are.
Switching power supply noise is generally not frequency-stable and it is
not a clean CW carrier. This one is actually TWO clean carriers,
separated by about 150 Hz.
Alan N1AL
On 6/7/22 17:43, Fred Jensen wrote:
I did
Yes, the modem router and a second router in the granny unit both run on
AC power, so they were off. There is no wired LAN to either the
computer or the K4 -- both connect to the Internet via Wi-Fi.
Alan N1AL
On 6/7/22 17:41, Ron wrote:
Sounds like wired LAN noise. Did you shut down your
the shack,
located in a granny unit.
I believe the exact fundamental frequency is 7007.03 kHz / 292 = 23.9967
kHz, in case that's a clue.
Anyone have any ideas of what could be causing this?
Alan N1AL
__
Elecraft mailing list
Home
About 8 pm here in southern Utah I was listening to W1AW code practice
on 10 meters. Good strong signal - received on a ground-mounted trap
vertical antenna. And I could hear a bunch of 10 meter beacon stations.
Alan N1AL
On 5/26/22 17:46, Wayne Burdick wrote:
Amazing is the only word
Yes, a WiFi extender works for me as well. The one I'm using is $39 on
Amazon:
https://www.amazon.com/gp/product/B0118SPFCK/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8=1
Alan N1AL
On 4/26/22 07:01, Dave wrote:
As someone who doesn’t have a wired Ethernet connection in the shack, I can
how to program it somehow.
Modern amateur radio transceivers are marvels of technology that run
rings around the radios of yore, but the price we pay is they are not as
easy to repair.
Alan N1AL
On 4/21/22 14:40, K9ZTV wrote:
No radio is ever "toss and replace" if i
I have a hamcrafters K42 CW Keyboard/reader that would go very well
With my 23 year old K2. I remember a kit-up article for a fixed audio output
Circuit for the K2. Can anyone point to that article?
If you have a clean little implementation of this item on a mini board, I would
be happy
To trade
www.eham.net/reviews/detail/6768
Photos of the popular "Twins" -- the KPA100 and KAT100 in EC2 enclosure
-- are at
https://wilcoxengineering.com/kpa100-in-ec2/
https://wilcoxengineering.com/k2-line-out/ describes an easy solution to
constant-level AF for PSK31.
Cheers,
Alan
Alan D.
I have used the Heil Goldline with a GM-4 element for over 12 years and
Always get good great audio reports on my K3.
Alan…K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
box.com/sh/5sswg3ubgevjr61/AABHBrgyMur1N4jKd7PhLIHoa?dl=0
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
http://amazon.com/author/alandwilcox
Williamsport
www.eham.net/reviews/detail/6768
Photos of the popular "Twins" -- the KPA100 and KAT100 in EC2 enclosure
-- are at
https://wilcoxengineering.com/kpa100-in-ec2/
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-916-9590 (cell, text)
http://amazon.com/author/alan
before applying full
voltage. Place the equipment in a safe spot (concrete floor) and make
sure it is well-fused in case a short does occur.
Alan N1AL
On 1/2/2022 12:20 PM, Fred Jensen wrote:
My S-Line acquired some tropical fungus that lived in the IF cans and
would creep out onto
be left in
place. They only need to be removed for cosmetic purposes. In fact,
attempting to remove the flux with alcohol or another solvent can
actually cause problems if the removal process is not complete.
Alan N1AL
On 1/2/2022 11:16 AM, Ray wrote:
I worked at a large Computer Company
e-question-that-frequently-comes-up-is-do-rosin-flux-residues-need-to-be-removed
Again I recommend that you not attempt to remove the flux residue unless
you have the technical means to ensure that all traces of it are
completely removed.
Alan N1AL
On 1/1/2022 2:01 PM, Eric Garner wrote:
>Th
in production and service was that any flux
remaining on the board due to re-work or repair was just left in place.
Alan N1AL
On 1/1/2022 3:25 AM, CUTTER DAVID via Elecraft wrote:
Ted
If the residue is clear, don't bother, you might create more damage than you
realise (ESD). If the residue
. It just has less loss.
Alan N1AL
On 12/18/2021 10:28 AM, John Harper wrote:
You might want to consider doing this within the Winter Field Day event.
That's a great suggestion.
Those are correct who say that an antenna (dipole) doesn't have to be low
to the ground to make use of NVIS - but having
me to
operate and to make a whole bunch of contest QSO’s in CQWW CW.
It is possible - but still unpleasant.
73, Alan K0AV
On Wed, Dec 15, 2021 at 8:15 AM David Hachadorian
wrote:
> For 12 years I've tried to get any enhancement of s/n from the K3 IF/RF
> NB and NR. I haven't seen on
www.eham.net/reviews/detail/6768
Photos of the popular "Twins" -- the KPA100 and KAT100 in EC2 enclosure
-- are at
https://wilcoxengineering.com/kpa100-in-ec2/
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-916-9590 (cell, text)
http://amazon.com/author/alan
of course there was no QRM to/from the
HF/2 meter ham gear.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hoste
d
of hurt these days. Fortunately I don't think Elecraft ever went down
that path.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailt
www.eham.net/reviews/detail/6768
Photos of the popular "Twins" -- the KPA100 and KAT100 in EC2 enclosure
-- are at
https://wilcoxengineering.com/kpa100-in-ec2/
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-916-9590 (cell, text)
http://amazon.com/author/alan
uot;Black text on white".
However, although it looks correct on the screen, when I print it it
still comes out with the black background.
I'm just using the free version of Adobe Reader. Perhaps someone with a
paid-up version can get it to print correctly (print to a printer or
print to ano
A few years ago I picked up a couple of the Hobbyking LiFePO4 packs, and a
couple friends of mine did also. Every one puffed after some months despite
being properly balance charged, not overdischarged, and not really used
very hard. They continued to operate, but they were clearly outgassing.
reference to E700035 in a
manual. It's a #4 x 3/8" nylon washer. I couldn't find any reference
to thickness of the washer.
73, Alan N5NA
On 2021-08-05 3:25 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 3
Date: Wed, 4 Aug 2021 11:59:03 -0500
From: Nick Kennedy
To:elecraft@mailman.
to change a light bulb?
NONE - It's a hardware problem.
73,
Alan. G4GNX
-- Original Message --
From: "John Payne"
To: Elecraft@mailman.qth.net
Sent: 26/07/2021 14:18:13
Subject: Re: [Elecraft] Off topic - musical composition
How many guitar players does it take to change a light
I build and refurbish Theatre Pipe Organs and produced sampled organs,
mainly for home use.
Wind pressures can be as high as 25" WG and some of my organs rise more
than 6' above the floor.
Any advance on 25" or 6'? ROTFL
My favourite stop = Bourbon to Organist Coupler. :-D
73,
A
and the cleaning process
was thorough enough to completely remove all traces of flux. That's
basically not possible using alcohol and cotton swabs on rosin.
Alan N1AL
On 7/14/2021 5:20 PM, Don Wilhelm wrote:
When I have cleaned boards with IPA or other cleaners, I apply the IPA
only in a small spot
there were no absorbing objects (like human hands) in the
near field of the inductor I was getting values in the 700-800 range on
some bands as I recall. (These were all air-wound solenoidal inductors.)
Alan N1AL
On 7/13/2021 10:32 AM, Al Lorona wrote:
Thanks to Al N1AL, Jack W6FB, and Dave
impedance but only barely meet spec into a low impedance. I
suspect the Elecraft tuners are similar.
Alan N1AL
On 7/11/2021 12:58 PM, Al Lorona wrote:
This question is about how manufacturers spec the matching range of their
antenna tuners.
If an antenna system presents an impedance of 5
quot;Twins" -- the KPA100 and KAT100 in EC2 enclosure
-- are at
https://wilcoxengineering.com/kpa100-in-ec2/
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-916-9590 (cell, text)
http://amazon.com/author/alandwilcox
Williamsport, PA 17701
_
Knowing Elecraft, I don't think you have anything to worry about.
You will get a unit that will be like new. There may be slight cosmetic
marks on the case, but that's doubtful too.
73,
Alan. G4GNX
-- Original Message --
From: "Bill Coleman"
To: "Elecraft"
Se
SOLD ... Many thanks to all who inquired and/or bid.
Cheers, Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955)
570-916-9590 (cell, text)
On 6/18/21 13:50, Alan D. Wilcox wrote:
PS ... The K2 also has the IMA, "K2 Internal Mic Adaptor" configured
for Heil microphone at
PS ... The K2 also has the IMA, "K2 Internal Mic Adaptor" configured for
Heil microphone at the moment.
Hello,
See https://wilcoxengineering.com/2020/06/09/selling-extra-equipment for
info and photos.
If you're interested in buying, contact me off list.
Cheers,
Alan
Alan D. Wil
Hello,
See https://wilcoxengineering.com/2020/06/09/selling-extra-equipment for
info and photos.
Cheers,
Alan
--
Alan D. Wilcox, W3DVX (K2-5373, K3-40, SKCC 22955)
570-916-9590 (cell, text)
https://WilcoxEngineering.com
http://www.eham.net/reviews/detail/6768 ... Elecraft Client Comments
I disagree.
The first rules of using test equipment are to calibrate it and RTFM,
then maybe you can trust it.
73,
Alan. G4GNX
-- Original Message --
From: "Dean L"
To: "Wes Stewart" ; "Elecraft Mail List"
Sent: 10/06/2021 20:36:41
Subject:
Right above your unsubscribe message is an Unsubscribe link to click on.
:-)
Juste au-dessus de votre message de désabonnement se trouve un lien de
désabonnement sur lequel cliquer. :-)
73,
Alan. G4GNX
-- Original Message --
From: "Jack F6AJW"
To: Elecraft@mailman.qt
Thanks Wayne.
I'm sure we all appreciate how busy you must be.
It seems like a reasonable compromise and will help to keep K4 only
subjects separated from other Elecraft product discussions.
73,
Alan. G4GNX
-- Original Message --
From: "Wayne Burdick"
To: "Ele
1 - 100 of 1854 matches
Mail list logo