6 meter preamp for K3 85$ shipped usa
KXV3-2 if out...great for panadapter / I/O for 6 meter preamp
60$ shipped usa
too many parts accumulating around here.
bill steffey ny9h
__
Elecraft mailing l
that k3/0 implementation with remotehams.com is wonderful and easy .
mini notebook w/ wifi
LOAD CLIENT SOFTWARE
usb to k3/0 CABLE
plug in mic or headset DONE
activated the wifi hotspot in my smartphone ...
and it even works
so far just ssb.
bill
__
ALL the Ham stuff K system/ big icom survived a near strike...
the antennas are disconnected at the garage entrance , where 4 10'
rods are ...
the stuff came in the phone line, into a phone poof across the
phone guts to the other line ..magicjackpoof... into the router poof...
ni
google:
VE7FYC SCOTT EVAN ALEXANDER CHARLES 2356 WEST 16TH AVENUE VANCOUVER B C V6K3B6
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailma
rch :
http://www.woodworkerssource.com/6_plywood.html
My elecraft / ICOM ACOM shack in a cabinetNY9H at QRZ.com
bill ny9h
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
me from the icom power supply )
HRIA covered it ,,,phewsent the bill got the check
The same thing happened three years later...
surges , hah... that unit is on an online 3.5k ups. resolved a
good solution with ICOM.
bill NY9H /3
__
I remember when 'the masses' were crying for a USB connection. Our
great sages at Elecraft kept suggesting that compatibility issues
would come along with USB et al.
Guess this would have been one ( or could have been one) if the USB
was a few years ago, and our designers were not as slick as
now we need a neat application for the old synth card
seems that there will be a few thousand available
What cool thing could we build in which to nest the olds synth card
__
Elecraft mailing list
Home: http://mailman.qth.n
even better take an broken telephone handset apart and use the mic element
...
bill NY9H
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
w you changed computers; just submitting it for completeness.
73 es Merry Christmas,
Rick wa6nhc
Tiny iPhone 5 keypad, typos are inevitable
> On Dec 17, 2014, at 6:17 PM, Bill NY9H wrote:
>
> just got it going,,,
>
> now i will read that while it loads
>
> tnx
>
> A
just got it going,,,
now i will read that while it loads
tnx
At 09:12 PM 12/17/2014, you wrote:
K3 Utility Help, Troubleshooting, MCU Load Failure, has a step by
step procedure for interrupted firmware loads.
73 de Dick, K6KR
> On Dec 17, 2014, at 18:00, Bill NY9H wrote:
>
oops...
tried to load new fw and it got confused.
Now when i try to force load,
i can not get the utility to give me a
" send" screen...either one ...all or selected...
and the led keeps blinking and "mcu ld" stays on the k3 lcd;
even changed computers to get a simple hw serial port
which i
maybe the brilliant designer thought he could build the 30 meter trap
to the power level allowed on 30 meters ;) ?
ps
At 01:49 PM 12/15/2014, Jim Brown wrote:
On Mon,12/15/2014 2:17 AM, Vic Rosenthal 4X6GP/K2VCO wrote:
I have heard of this happening with the R8, although
don't forget that long antenna you have running out to the street,
even if it's buried your telephone line brings bad stuff in on it ,,,
it took out a new TV...router, network raid drive, all the phones
the junk probably crossed over on a two line phone to the
magicjack..then into the network..
have that
O yes... one of our illustrious founders was the chief engineer at
Mountain Computer about then.
bill ny9h/3
At 12:52 PM 5/28/2014, Dauer, Edward wrote:
One of the interesting pieces of that history, from a retail consumer
user's (layman's) point of view, is that the A
0watt top & kat100 bottom , cables
$1350 with each in heavy duty pelican cases..
reason selling kx3 & amp tuner
Herc II with TT PS ...12VDC solid state 500watt amp 1400 ( maybe
even the remote control ...if I find it !) got a kpa500
quot; to be the same device
the little iclever thing worked great with my kx3.
I have yet to try the new unbranded one which was 25$ incl shipping..
bill
ny9h/3
At 01:30 PM 4/29/2014, W0MU Mike Fatchett wrote:
I have just joined the ranks of hearing aid wearers.
Has anyone found a good b
too bad nowhere does it differentiate between the different Lithium,
chemistries..
since my 10ah LIPO iron phosphate is supposed to be safer , but I
see no listing so it stays at home when I go on trip
Don't want to lose it in with the pocket knives.
bill
__
me.
TNX for Elecraft management for emailing some ideas,.,,,
the K3 was / is working perfectly I was not ,.
bill ny9h/3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
on my K3
Vox shows on ..
in cw mode vox does work as expected...
in SSB vox icon shows, but no TX audio /PWR present ,
in vox mode my ptt switch does key & has audio & pwr
no change changing Mic & lin off
what have I MISADJUSTED ,,,
bill
__
Vox shows on ..
in cw mode vox does work as expected...
in SSB vox icon shows, but no TX audio /PWR present ,
in vox mode my ptt switch does key & has audio & pwr
no change changing Mic & lin off
what have I MISADJUSTED ,,,
bill
_
no CE or UL on my Gamma...
input ( since it is a switcher ) is marked on back 85-264...\
I put powerpoles on the front on mine
and a big sticker reminding me 30 watts rtty/psk
it IS a 4 A switcher inside...
bill
At 10:30 AM 1/10/2014, Jeff Griffin wrote:
Well I've had my Gamma for maybe 5
I have and like the hmd280,
With the boom mic !! Hmd dynamic or hme electret'
However I just bought a comfy stereo boom headset w electret at frys for 9.99$,
Perfect for the kx3 , or k3 rear plug ins.
Bill. At the w9dxcc convention
Sent from my iPad
On Sep 19, 2013, at 10:07 AM, "Jim N7US
Sent from my iPad
On Apr 14, 2013, at 2:35 PM, Matt Zilmer wrote:
> Hi Tom,
>
> You might want to take a look at the KX3 Mobile User Guide, posted on
> Elecraft's web site:
> http://www.elecraft.com/K2_Manual_Download_Page.htm#kx3_mobile
>
> I'm also a MARS op, and have used the KX3 mobile f
I used a piece of red/black paired wire ..
prompts me to mention that just because it says it is 10 gauge or 12
or whatever gauge
take a good look before you buy that spool...i have bought
stuff red/black that was NOT as printed on the spool or the
wire. and as you might gu
bruce , I also have two amps...which I flip
between using two topten a/b switches.
works like a charm...
used to be a TT titan and a Hercules...
now an ACOM and the kpa500
easy to automate or just put a little toggle & led array
see bottom center of pix
https://picasawe
while we are fortunate to have a K3 which auto drops power for tuning
what about rigs that tune at higher power or full power...
what does the rig's output see at the input to the tuner when the
tuner is clunking/clanking along relays switching C & L
components ??? 50 ohms...??
I woul
>I like the idea of Elecraft offering K3, P3 and W2 blank cases.
>
>speaker grill and ventilation slots
i would buy yes.....
bill ny9h
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
t dayton.. I think 3 for 9$
I WAS lucky and they worked great ,at field day on k3 ...and
mobile on the kx3
just make certain that you get 3.5mm plugs for both the headphone &
the mic,.,,,
someone else can try ...
bill ny9h/3
__
i believe that radio shack has an xlr inline and an 8 pin foster
type plug
tada... a 2 conductor cable shielded,,, done...
or just buy a readily assembled xlr extension at radio shack or a
music store,,,chop
then add the foster 8 pin to the proper end... fast and half wired alread
before swapping all
the crystals in the K2 crystal filter.
I opened up the bottom , top & back Fan assembly.
From the bottom, with the set upside down, let the Hakko do it magic
on the four pads, which dropped
the two parts on the table then inserted the two new
parts,,,resoldered
i bought genovation rs-232 programmable pad to go into the k3,,,
no computer,,, they have ps2/usb # 683 or rs 232 versions
intended to put modes & frequeicies cw & data & ssb ,,, into the PAD...
as complete commands,,, now all i need to do is use the pad to trip
all the memorie
THE BAIT FELL OFF...really
bill ny9h/3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
6000$ ?? Must have been approved or the ad is SERIOUSLY & in
violation of FCC stuff missing the regular statement;
[]
This device has not been approved by the F.C.C. This device may not
be offered for sale or lease or be sold or leased until approval of
the F.C.C. has been obtained. T
i picked up several motorola hands free kits...for the k2
for under 3$ each ...shippedthey have a 2x6 WATT amp inside..
just reconnectorize , apply 12 vdc.( alot of current) and stand back
even has a regulated 6.25out
still have some pix on line,,, with part #s
https://picasaweb.google
i've bought from this outfit...
i have a touchscreen/vga in my radio console for music
jukebox,,,/ sdr-IQ
this looks like a newer piece...http://www.short-circuit.com/product/vm80l.html
__
Elecraft mailing list
Home: http://m
SOLDSOLD
tnx
h/3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
i do tire of spinning that know from ssb to cw.
what's the harm if it can be shut off??
pse ...when you have some spare time wayne....
bill ny9h/3
10:41 AM 3/3/2012, Jim McDonald wrote:
>I would like that too. I think either Icom or Ten-Tec that does that.
>
>Icom does
used KAF2 rev B 44$ shipped to us address.
bill n...@arrl.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list ho
used KAF2 rev B 44$ shipped to us address.
bill n...@arrl.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list ho
g
split , it has many if not all the little "techniques" of working
split efficiently
if you have not read it , and you want to work DX you have been
reading the wrong stuff.check it out
http://www.idiompress.com/books-complete-dxer.html
I buy worn out copies at hamfests
d
so far no smoke,.,,,\\
now that i just assembled my kpa500 . do i sell my 12 volt herc ?
...probably not....
bill ny9h/3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth
II used to have Titan... in a cabinet and a shelf directly above it ...
but on top of the titan was my antenna switching matrix panel
behind the panel were two holes for the 3cx800s with flexible
dryer venting taking the hot air out the side of the cabinet... (
bookshelves) ...
Rob May wrote: Kits won't ship until May 15, Grumble, grumble, grumble.
I have to add to that :grumble grumble. in line for a K
bill ny9h/3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
don't forget the wonderful Clifton Labs z-90 & Z91
I say that cause I still have mine sitting on a self awaiting a new home...
pure sales messagemine is the one with the display
see clifton labs for infor
happy new year
bill/3
At 05:21 PM 12/31/2010, Don Wilhelm wrote:
>
hey guys
FACE IT ;
THE YAESU IS ON TOP
let someone have their 15 minutes ok3 minutes,,,
TIMES UP ..
BILL /3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailm
FWD:
Subject: [nidxa] K8DD - Silent Key
Some of you may know Hank Kohl, K8DD. He often attended W9DXCC. He
recently went into the hospital for a relatively routine surgery, but
caught pneumonia which lead to respiratory complications. He died
last night after 4 weeks in ICU.
Hank was a
have my K2 qrp with KPA100/KAT100,, and K2/100
bill ny9h/3
Washington Amateur Communications
SUNDAY, NOVEMBER 7, 2010
WASHINGTON COUNTY FAIRGROUNDS
2151 North Main St.
WASHINGTON, PA 15301
8:00 A.M 2:00 P.M Admission $5.00
Doors open early for VENDOR SETUP Saturday 8:00 p.m.
Talk i
>These are pretty cute:
>http://www.avantelectronics.com/AVANTONE_mixcubes.htm
i really like the description at the website:
as to why their speaker is better:
"We designed a proprietary 5.25" die cast aluminum frame driver/cone
assembly to exceed the performance of the originals. The mounting
in the manual the parts i like the most are the rear panel spaces
for KBD & Sensor
bill /3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@
oops 847 405 0662
At 07:59 AM 7/15/2010, Bill NY9H wrote:
>Karl,
>
>SOLD
>I'll buy the k3
>
>call me and I'll call you back on my dime
>
>bill /3
>
>
>
>
>At 03:06 AM 7/15/2010, KARL MARDERIAN wrote:
> >My beloved K3. It is in e
Karl,
SOLD
I'll buy the k3
call me and I'll call you back on my dime
bill /3
At 03:06 AM 7/15/2010, KARL MARDERIAN wrote:
>My beloved K3. It is in excellent cond. It has instruction books and
>a lot of basic mods. It is a 100w unit SN 2244. Comes with upgraded
>DSP board and the fo
I'd think that way to go would be to put a $ .50 electret capsule or
one swapped from an old telephone set ( you know the junkers) that
used an electret ,.,,,
set the bias on, tweak up the EQ IF preferred,,,and have a great
sounding d-104...
I put one in front of a dynamic cartridge in one of
>Jim said:
> Fifth, hams seem to confuse the setting of the
>front panel controls with how much audio the rig can put out.
Do you mean to tell me that I might be getting full audio output at 9
o clock ?
wow . ; )
I suppose that goes for my gutbuster car stereo as well..
(ps to
the metal so239 covers/caps, found at any hamfest , are the same
threading as i use them when i'm connected to my microham controller
bill
t 10:21 AM 6/14/2010, n5lz wrote:
>I cover the front mic connecters on my K3s with flexible SO-239 connector
>protectors (which often come with a new
why would not a "macro" kbd such as below work ???
putting any of the k3 commands into the macros on the keyboard
http://www.xkeys.com/xkeys/xkstick.php
$ 99
bill /3
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/l
great dayton...
a lot more people
a lot more young people ,
SUNSHINE,,,
I passed by / thru Kenwood three times along the wall of the new radio...
I did hear the word "K3" each time... not one time did I hear "kenwood",.
If the new Kenwood has a tuner I wonder if it has the capabilit
here it is with speakers in front
where speakers belong...facing the operator,,,
http://picasaweb.google.com/Bill.SteffeySr/HamRadioNY9H#5309374156528969042
bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listin
>ins to Audio so I can help my neighbor Bob, W9KNI get his dialed in.
>His sounds lousy and he
if you want a handheld for a K3,,,or K2 or icom...
check out
:http://www.shure.com/ProAudio/Products/WiredMicrophones/us_pro_527C_content
you will notice that this mic has a rising hi end response,,
okay any just where is the youtube of the kpa500 amp ?
it's been more than
three minutes , so somebody is holding back :)
bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http:
ooppsnow i can't find it ,sri
bill
At 08:23 AM 4/15/2010, Bill NY9H wrote:
>It's up on the website , time to order
>
>
>bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/
It's up on the website , time to order
bill
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
I heard an ICOM employee explain that the 7700 was better than the
7800 because the 7700 did not have the 3db loss ... because it only
had one receiver in the 7700 ! wow ..that must make it a
"contest set" .
i certainly don't mind the split loss in the 7800 or the k3..
I had inst
At 02:08 PM 9/24/2009, William Carver wrote:
>I lost a PC power su
filter parts missing from production power suppliesprobably after
agency certifications.
RSGB's magazine has been on this issue for many months with pictures etc
I believe that they had not much concern from their OFCOM
going for glorosio for 17 meters while split ...
I think i'd much prefer the front of the two concentrics to be AF
main ( bottom) and AF sub top
as I find myself constantly reaching behind to change the level of
the sub channel while hunting ..
someone recently suggested a menu
i knew there was a reason to buy those old Wavetek generators for $
20...at the club auction. one works... one dead ,,,but what a supply
of nice machined knobs.
The fit the shafts ...perfectly... a tad big and gray
Look around your piles of stuff, you might find something that fit
perfect
I believe that when YOUR TAX dollars purchase radios for your fire &
police departments
that one of the big "American" vendors..indicates that in 6 years
they will no longer support the radios. AND THEY GET MILLIONS FOR
THOSE SYSTEMS.Too bad our 35 year old 5 community police repeater
system f
2 votes for a good ballistic tuning VFO , ( defeatable)
icom does do it very well on the 756 & 7800
bill ny9h
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth
started out with sn#260,,, as a qrp /mobile/battery system in a pelican case
then added the KA100/ KAT 100 in an EC2 enclosure.
Then I perforated the front of the EC2 for two elipitical
speakers...on the front.
That also in a pelican case
then I obtained a sn#3200 k2/100 with external tun
I have two "Hear-it" speakers from England's BHI company hooked thru
my microham controller's headphone outputwhich is connected to
the 7800 & the K3.
With a low- mid aggressive setting they don't sound anything but
quieter. (what a concept)... leave them in line most all the time.
No
great explanations...
i use a MK2+ also...for the K3 & an ICOM. works great !
but for the lpPan I use the Roland Edirol FA66"sound card"
the SDR IQ has it's own ...
I also happen to use a emu 202 for feeding the station's stereo system.
much better than the "resident" motherboard so
Could it be the fans, when I power up they briefly turn on...
bill
At 10:30 PM 3/3/2009, Daniel B Beugelmans Md wrote:
>Dear K3 reflector-
>
>I have a question regarding my new to me K3- 100 with ATU. Although
>it seems to work well, when I turn it on, I hear a fairly loud high
>pitched motor-
> black vinyl cover caps made for SO-239 connectors:snap tightly over
>the mic socket.
these work great...
i use the red version to put on mic connectors of several rigs that
are receive only ...
( and sharing a receive multicoupler ) to remind me DON'T PLUG
A MIC HERE...after snuff
ever since I out a G3LLL RF clipper in my first transceiver,,, and
saw the difference...
I was convinced how effective RF clipping can be. G3LLL was careful
to indicate that you should roll off the bottom end... so as to not
totally overburden your powersupply with the extended "duty cycle"
usi
I'm certain Eric remembers that I asked him the same thing at Dayton
when they first showed the K3... flip all the parameters back and
forth between the two receivers...
or something like that ...
but we will have to wait in line for more important things...for a while
bill
At 08:40 PM 1/30/
my wife's car stereo has an adjustment for CDs it optionally
reduces the dynamic range to you CAN hear it in the car, with all
that ambient.
bill
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the l
At 04:43 PM 1/3/2009, Guy Olinger, K2AV wrote:
What niche?
very well put Guy ,,,
I hope they also provide parts to have a front facing spkr./s.. so
we could have
a matching front speakersI suppose if you could integrate
into the same chassis that would be nice also could be nar
YEARS AGO... Prior to changing out the "unmatched" crystals for
"matched" ones in my K2, I decided that it was time to buy that
"solder sucker ... The HAKKO 808... the handheld powered vacuum
sucker... I was concerned about the number of desolderings involved
on the main board. AND IT was a
Thanks Wayne I always HATED that audio pop ever since solid
state outputs
now it turns on like it should like the expensive esoteric piece it is .
Merry Christmas & Happy Holidays to all the crew... ( even Eric)
bill
visit my station @
http://picasaweb.google.com/Bill.St
Thanks to the G; whomever it was,,, for the hint on the removal of the choke
( audio output mod).
That was to turn the set upside down ... use my fantastic solder
suckerthen drop the old part into the set . This rather than
having to remove the 2ndRX to get to that choke.
Then put the ne
I thought those with concern or issues have already taken pin 7 & 8
to ground...
"bypassing" the inductors and L7 on the rear mic input
bill
At 02:17 PM 12/19/2008, Iain MacDonnell - N6ML wrote:
Hmm, but there has been a recommendation to connect the mic return
and shield to the connector
But The Neumann looks so cool, and the dynamic range will do
sound so great ...
aside from the silky smooth freq response... ;)
bill
At 10:29 AM 12/15/2008, Jim Brown wrote:
On Mon, 15 Dec 2008 09:02:20 -0500, Phil LaMarche wrote:
>How about the RE 27 on the K3?
_
The DVR works great ... yet I have a question or suggestion...
When I run SSB I have the monitor level turned to 0 ( off)...
and then I do not hear the memory playback
It is very strange knowing you are Xmiting, and not hearing what's going out.
Could there be a way to set a monitor leve
At 11:32 PM 11/16/2008, Benny Aumala wrote:
Those high priced splitter units ($50) include box and BNC connectors.
If you do not want to build from stratch, try this for $14.20 :
http://www.minicircuits.com/pdfs/PSC-2-1.pdf
*
$7.50 & shipping...
http://www.alltronics.co
"TX" is blinking hard to see
Unfortunately, this can not be done. The display...Don't expect this to
happen.
IF elecraft decided it is a real issue.. they COULD make the
FREQUENCY OR all of the elements flashing on & off to remind us
that " IT AIN'T GONNA XMIT" YOU TURNED IT OFF,
abt a month ago I wrote a long response on why not a parametric eq
for cw ??? but trashed it .
for cw would not a parametric implementation be better than the
"graphic" audio eq ?
or is that already happening in the dsp ???
bill
At 02:28 PM 11/7/2008, Igor Sokolov wrote:
In fact dig
At 12:47 PM 10/26/2008, [EMAIL PROTECTED] wrote:
All of the suggestions so far are good; however, it sure would be
great if Elecraft would offer a true remote tuner that can be
mounted at the antenna feedpoint. This might even alleviate the
need for some of us to consider a KPA800, etc.
or
When I do the double hit on 'split' I move the freq & mode to vfo B. ( good)
It also tell VFOb ( 2nd rcvr) to go to filter # 4 to which my vfo
A was 'set' , causing the sub rcvr to go dead, since I don't have a
#4 on the sub rcvr.
Is there a way to force Filter # 2 on... in the sub rcvr??
t software,,,
bill
At 12:30 PM 10/9/2008, Iain MacDonnell - K6IAM wrote:
Page 25 of the owner's manual says "(i) The NB icon will flash slowly if
the I.F. blanker setting is too high for the present signal conditions.
If this happens, use a lower setting."
~Iain
Bill NY9H wrote
I know I read about it somewhere but cannot find it
when I turn on the IF NB ...the NB flashes, not the dsp nb...
did it mean too much garbage to fix ??
not all the time
in fact It just stopped doing that ,,,ARG
so If my current noise is handled best by dsp 2-7 that is in
when clicking on a DX4WIN spot, I now need to click twice...
once for the freq and a second time if the mode is different
also when split is called for, the vfo b gets it , but the K3 only
flashes "split" then retains the non split mode.
The ICOM goes to split and gets the vfo freq & mod
if you use the K3's internal keyer (paddle input).
It doesn't work when straight key or external keyer. The Manual could
be more definite on this point, it seems to come up often.
Bob NW8L
AND... as I forgot yesterday, your paddle hooked up to your keyer
will NOT program the K3 internal mem
about 6-8 " wide... with grilles for 2 spkrsfront facing, of course.
like the EC2/kat100/kpa100 for my K2
http://picasaweb.google.com/Bill.SteffeySr/K3#5164773634425387490
It is about the right size for the LCD / panadapter also. :)
bill
At 11:08 AM 9/25/2008, [EMAIL PROTECTED] w
subject lines could be " standardized" or "grouped" . K3 or K2X
ie: K3 wish list , ( includes redesigning the K3 because it
works fine now )
K3 filters
K3 alc
that would help those who can only see the subject line
bill
At 09:42 AM 9/9/2008, Ralph Tyrre
yes yes yes. this note is CORRECT...for #44. in front of J64,
and just under the back edge of the KBPF board
bill
At 07:47 AM 9/8/2008, Dick Dievendorff wrote:
The current version of the KRX3 installation instructions errata has this
item:
Page 34, Figure 39: Delete the note
isn't cheap but good audio & a serial port , too bad I
don't know how to program a remote front end for the k3,,
Hell Simon..
http://www.barix.com/index.php?linkid=421
I believe you can use it at one end and another OR a cpu at the other end
bill
At 08:17 AM 9/5/20
At 02:47 PM 8/25/2008, Ken N9VV wrote:
re: "antiquated serial ports" (hihihi)
well Intel and Microsoft declared them "Legacy Ports" in
their Motherboard build specification in 1998
if THEY had their way we'd be buying new radios every 120 days.
Thanks goodness this is NOT the computer ind
nope, the jumper it is NOT between , as described in the manual
I sent this note to support :on July 16th,,,
the w4 jumper is NOT between the w4 jumper block and the Kio boards,
I kept looking to make certain i was looking at the w4
jumper(which I was)
and you do need
Of course it is competition ( IC 7700 ), as some will buy it rather
than the K3.
It is however an apples and oranges comparison...
The 7700 has "dual watch" which is just like the 756PIII, much better
than no second receiverbut far far from a full second
receiver( it can't split the m
It IS in the instructions that our older boards had a wire which
needed to be cut
and that jumper is indeed partially hidden by the bandpass board,
That jumper's location could be better identified in the instructions,
as I recall it is to the rear of that jumper block, not in front of it .
1 - 100 of 251 matches
Mail list logo