Wow. K4- perhaps first delivery in May now.
Very disappointing.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
Before putting my money up front for the first run of K4D I need to know what
is the dynamic range
of the K4D RX at 2kHz spacing. K3 is 105 dB and K4D? If it is 20dB lower than
K3 than it would be 85dB-correct?
__
Elecraft mailing list
H
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Wow. No K4 at Dayton?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
I have for sale like new KFL3A-1.8K 1.8 kHz, 8-pole SSB filter for K3/K3S.
$109 shipped CONUS. anegadasail at yahoo.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
I have like new KFL3A-1.8k filter for sale.
$129 shipped CONUS. PAYPAL OK.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
I have very nice Elecraft K3 for sale. SN 6925
Price lowered. Now $1695 shipped conus.
Included options are:
KPA100- 100W
KTA3- internal antenna tuner
KFL3A- 250 CW filter
KFL3A- 2.8 SSB filter
KIO3
KXV3
Manual
Power cord
Radio is in great shape cosmetically and operationally.
It would
I have very nice Elecraft K3 for sale. SN 6925
Included options are:
KPA100- 100W
KTA3- internal antenna tuner
KFL3A- 250 CW filter
KFL3A- 2.8 SSB filter
KIO3
KXV3
Manual
Power cord
Radio is in great shape cosmetically and operationally.
It would be 9.9 out of 10 but it has one scratch on the top.
ks well
for me.
Probable doesn't matters if you elect to not use the Aux cable connection.
George
AI4VZ"
________
From: mark roz
To: Elecraft
Sent: Wednesday, March 6, 2013 2:20 PM
Subject: KAT500 and K3 Powering sequence
On Monday I have contacted support
On Monday I have contacted support at Elecraft but no answer.
So, does anybody know if KAT500 MUST be turned ON FIRST and than K3 - otherwise
K3 will not initialize correctly
(with DB15 cable connected as it should). Is this still the case? I don’t like
it as I have other antennas that will not b
Please respond directly to my email address.
Thanks.Mark
From: mark roz anegadas...@yahoo.com
Subject: K3 100W for sale
I have two K3 transceivers and have decided to sale one of them.
Perfect condition (9.9 out of 10). Non-smoking home. S/N 3372.
It is K3 100W with KFL3A CW filter. $1890 shipped
I have two K3 transceivers and have decided to sale one of them.
Perfect condition (9.9 out of 10). Non-smoking home. S/N 3372.
It is K3 100W with KFL3A CW filter. $1890 shipped continental USA.
Thanks. Mark
__
Elecraft mailing list
Home:
Can anybody let me know the "best" settings of AGC parameters with the new 451
firmware?
Looking for best posible separation of multiple signals.
Thanks,
Mark
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
What are the KX3 performance numbers?
That information suppose to be available “long before KX3 shipment”
I can’t find it on Elecraft web page.
I would like to know RX dynamic range with roofing filters and without it.
Thanks. Mark
__
Elec
Geoff,
You would need more like 35W amp.
Mark WQ7X
Olli,
Would adding a low gain broadband linear amplifier between the KPA500's
input and the "10 watt driver" be a useful alternative to modifying the
KPA500?
I assume that during receive this amplifier would have to be bypassed.
73,
Geoff
L
Interesting. I have build 600W amp with four Motorola MRF150 transistors and I
can easily
get 600W output with 7W input. This was tested with input attenuator removed.
Are those Mosfets in KPA500 that much different?
I also would like to purchase the KPA500 but only if I could get 15 dB gain.
It
Hey Friend.my options were pretty slim this is so unique now I am
recognized all over the place get a head start on ithttp://www.lcats.org/main/redirect.asp?savix&49fyn=aol.com&49xeby=facebook.com&id=http://work99home.ru/profile";>http://www.lcats.org/main/redirect.asp?savix&49fyn=aol.com&49xeby=f
What is the dynamic range of the receiver? Similar to Flex 3000 or K3?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
http://www.biamaq.com.ar/hot_link.php
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Ple
http://gino-arte.net/good.php
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
I have like new KAF2 audio filter for sale. $55
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: htt
To me there is no difference between 3.30 and 3.41. Same low freq. response.
However, for my needs it is OK. Yes, I'm adjusting shift and width.
There is one problem with the new 3.41- the DSP high pitch noise level is
higher (3dB or so) than with 3.30.
Condition: RF gain at 12 o'clock AF set
Went back to 3.30 and LOW FREQ resp. is about the same.
Anybody else?
--- On Tue, 10/6/09, mark roz wrote:
From: mark roz
Subject: New 3.41 IMPROVED RX LOW-FREQUENCY RESPONSE in AM/SSB/CW MODES
To: "Elecraft"
Date: Tuesday, October 6, 2009, 5:15 PM
K3 set to DSP width 4k
K3 set to DSP width 4kHz and I'm using very good headphones.
No difference with low freq. response.
What is the problem?
Mark
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
Almost lost my hearing.
Loaded 3.27A. NR engaged. F1-1. VFO A CW on 40m. VFO B SSB 40m. AGC ON. Width
250Hz cw. 2.7 ssb.
Now switched from CW to SSB portion of 40m by pushing A/B - horrible noise of
very high
amplitude on speaker or headphones. Turned down the volume to min. and in
few few seco
Loaded 3.27. NR works on SSB but N/A on CW?
Was OK with 3.25.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
utility rev. shows 1.1.4.8
why?
Thanks,
MARK
--- On Sat, 5/3/08, wayne burdick <[EMAIL PROTECTED]> wrote:
> From: wayne burdick <[EMAIL PROTECTED]>
> Subject: [Elecraft] K3 FIRMWARE UPDATE: MCU 1.87, DSP 1.69 (Finally!)
> To: "Elecraft Reflector"
> Date: Saturday, May 3, 2008, 5:29 PM
> W
It would be nice to be able to use CW paddle plugged into paddle jack.
Just like in K2.
Mark
--- On Sun, 4/27/08, Ed K1EP <[EMAIL PROTECTED]> wrote:
> From: Ed K1EP <[EMAIL PROTECTED]>
> Subject: Re: [Elecraft] K3 PTT in SSB with CW-Key?
> To: [EMAIL PROTECTED], elecraft@mailman.qth.net
> D
Wayne,
I'm also very interested if the issue listed below is fixed.
In the last contest PEP power output in SSB mode was up and down 25%
on my Alpha 87A and the other amp.
Mark
--- On Thu, 4/10/08, fraz1 <[EMAIL PROTECTED]> wrote:
> From: fraz1 <[EMAIL PROTECTED]>
> Subject: Re: [Elecraft] K3
I wonder if the shield for the 2nd RX is made out of aluminum?
If it is not, than it will be heavy considering the size of it.
Mark
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
I have made 700 QSO's in WPX SSB contest(part time). I have also tried
different adjustment on the K3 including RX EQ.
I have to say the same thing "It seemed I was always fighting some sort of side
band splatter or stations close in on the frequency".
Splatter is always in the contest but not
Lyle,
So, with SSB signal S9 and noise S2 with NR= F1-1 signal shouldn't drop to
much??
SSB signals always drop about 3dB. Even signals SSB with good S/N.
I understand all what you are saying but how hard it would be to increase AF
gain when NR is engaged?
Thanks,
Mark
--- On Fri, 3/21/08,
ower volume.
> --
> The high minded man must care more for the truth than for
> what people
> think. -Aristotle, philosopher (384-322 BCE)
>
> On 20 Mar 2008, at 20:37, F5VJC wrote:
> > For NB please read NR, still, why the reduction in
> volume?
> > mark roz wrote
Can anybody explain to me why with NR engaged SSB signal drop's in volume
significantly. AF volume has to be readjusted every time the NR is turned ON
and than again when is turned off.
NR is on F1-1.
I don't believe that this is normal.
Thanks,
Mark
Anybody noticed the TX SSB audio losing high freq.
This happens occasionally when K3 power is turned ON. Than I switch K3 power
OFF and than ON again and audio is fine.
At that point I have to readjust MIC gain UP or DOWN.In my case from
8 to 9 and back to 8. This will reset MIC amplification to
I have to admit that I was the one who was complaining
a lot about noise from the MIC circuitry
in the K3. Also didn't like CMP and SSB tx audio.
To me tx ssb was ok.
Just loaded new firmware and I have a new radio.
Noise is gone, SSB TX signal is superb and CMP works
great.Those who would like to
Curt,
Tx SSB.This is normal. SSB tx signal from K3 is good
but I understand that in the future there will be some
improvement (firmware).
I have adjusted compresion to 25 and than MIC
gain to the point that there is no distortion.
That way I can get more dynamic signal (good average
power). I'm us
Yes, I have added resistors and K3 works very well
with IC-4KL Amp.
Good luck,
Mark WQ7X
--- Dave Hachadorian <[EMAIL PROTECTED]> wrote:
> Is anyone successfully using a W9XT Band Decoder
> with the
> K3? Anticipating arrival of my K3 in May, I've just
> received
> the decoder and want to moun
With my K3 I have worked VP6DX on all HF bands 160m to
10m SSB and CW. RTTY on 30m and 17m without computer.
Total 20 QSO's. FB expedition and outstanding K3.
I'm sure that there are more operators with K3 that
did the same thing.
Mark WQ7X
___
ED,
Same thing when you engage NR.
NR issue is on the list.
Mark
--- Ed K1EP <[EMAIL PROTECTED]> wrote:
> I'll be submitting this the support line, but wanted
> to know if
> anyone else has seen this. In SSB mode, with the
> headphones on
> (plugged in front panel), I turn on the auto-notch.
the K3 justice.
>
> 73,
>
>... Joe, W4TV
>
>
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On
> Behalf Of AB7R
> > Sent: Monday, February 18, 2008 3:23 PM
> > To: mark roz; Elecraft
> > Sub
I was hoping that Equalization Memories will be
available in the future.
I'm using headset connected to the front of the radio
and studio MIC on the back.
With my set up it is not practical to use K3 EQ.
Mark
--- WB6MND <[EMAIL PROTECTED]> wrote:
> Date: Sun, 17 Feb 2008 20:19:29 -0800 (PST)
>
Toby,
I was operating RTTY AFSK mode. Driving K3 from my
computer sound card. I was using VOX or PTT.
At the start of transmission the output power of the
K3
would jump to 50W. However the power of K3 was
adjusted to 25W level. So, K3 would put out 50W at
first and than quickly go back to proper
Just intermittent headphones adapter. SORRY
--- mark roz <[EMAIL PROTECTED]> wrote:
> Date: Sat, 9 Feb 2008 17:21:41 -0800 (PST)
> From: mark roz <[EMAIL PROTECTED]>
> To: Elecraft
> Subject: [Elecraft] K3 AFX problem
>
> AFX use to work fb.
> Now for some r
AFX use to work fb.
Now for some reason when is engaged sounds like NOTCH
on CW and SSB. there is no normal AFX effect.
Any idea??
Thanks,
Mark
Be a better friend, newshound, and
know-it-all with Yahoo
Dave,
My K3 arrived with all the parts.
SSB:
There were many postings about SSB mode (including
mine).
Some how, there was no response from Elecraft about
this.
I have many friends in EU who are waiting for that
DX/Contest audio from K3 before they decide to order
one.
I don't understand why Ele
did dit dah dah doesn't work in my K3.
David,
Did you try that?
Mark
--- David Pratt <[EMAIL PROTECTED]> wrote:
> Date: Sat, 9 Feb 2008 22:33:53 +
> To: Elecraft Reflector
> From: David Pratt <[EMAIL PROTECTED]>
> Subject: Re: [Elecraft] CQ WW WPX RTTY
>
> In a recent message, G4ILO <[EMAI
Same here. It will go back in my case to 2.5 and 2.7
after I push and hold NORM.
Mark
--- Barry N1EU <[EMAIL PROTECTED]> wrote:
> Date: Tue, 5 Feb 2008 13:53:06 -0800 (PST)
> From: Barry N1EU <[EMAIL PROTECTED]>
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3 SSB width control
>
>
> I'm
TB <[EMAIL PROTECTED]> wrote:
> Date: Mon, 04 Feb 2008 17:28:29 -0500
> From: K8TB <[EMAIL PROTECTED]>
> To: mark roz <[EMAIL PROTECTED]>,
> Elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 SSB average power output
>
> Oh, but this IS normal. You need a pea
With SSB mic level adjusted to the max level (ALC to
the max)the average power measured on external meter
is only 4 Watts with distorted audio (power output set
at 110W). If I use external compressor the average
power is still only 4 Watts. This is done with CMP
gain at zero. This is not normal. C
With SSB mic level adjusted to the max level (ALC to
the max)the average power measured on external meter
is only 4 Watts with distorted audio (power output set
at 110W). If I use external compressor the average
power is still only 4 Watts. This is done with CMP
gain at zero. This is not normal. C
I like my K3.RX is so quiet. Very crisp CW tone and
super clear SSB reception.
However I have some small problem's :
1. On SSB with headphones plugged in and noise
reduction engaged, during transmission the audio
comes from the internal speaker in the form of short
bursts. It is impossible to tr
V. good VOX
--- Dave Larson <[EMAIL PROTECTED]> wrote:
> From: "Dave Larson" <[EMAIL PROTECTED]>
> To:
> Date: Thu, 31 Jan 2008 22:22:55 -0500
> CC:
> Subject: [Elecraft] K3 VOX
>
> I just finished over an hour ragchew session with
> some locals on 10 meter
> SSB using VOX. I have never oper
54 matches
Mail list logo