Lance,
Add a bit of decode logic to the band outputs to decode the bands of
interest to you, and use the output to activate the TX INH for that band.
Yeah, I know it is not internal, but it is so easy to do. I don't think
there are many out there with this specific requirement.
73,
Don W3FPR
On 5/18/2010 7:39 PM, Vic K2VCO wrote:
Also, it means I can't check my monitor level before going into VOX!
>
> Remember that TX INHIBIT is not the same as TX TEST. What you get when you
> hold the right
> side of the Mode button is TX TEST, in which the tones are not disabled.
>
> TX INHIBIT is a
On 5/18/2010 12:19 PM, David Ferrington, M0XDF wrote:
> Wayne, does this meen I can't here the keyer when I'm in TX INHIBIT?
>
> I use it as a way of practicing my keying, which isn't up to much yet, but if
> you've
> stopped the feedback, I can't do that any more.
>
> Also, it means I can't check
the same. You
> will hear your tones.
>
>
>
>
>
>> From: m0...@alphadene.co.uk
>> Date: Tue, 18 May 2010 20:19:32 +0100
>> To: elecraft...@yahoogroups.com
>> CC: elecraft@mailman.qth.net; elecr...@yahoogroups.com
>> Subject: Re: [Elecraft] [E
Correction, if you HOLD the MODE button.
From: notforc...@hotmail.com
To: m0...@alphadene.co.uk; elecraft@mailman.qth.net
Subject: RE: [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB
algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.
Date: Tue, 18 May 2010 19:31
; Date: Tue, 18 May 2010 20:19:32 +0100
> To: elecraft...@yahoogroups.com
> CC: elecraft@mailman.qth.net; elecr...@yahoogroups.com
> Subject: Re: [Elecraft] [Elecraft_K3] K3 Firmware Rev. 3.97: new DSP NB
> algorithm, improved TX INHibit, accurate S-meter w/AGC off, etc.
>
>
Wayne, does this meen I can't here the keyer when I'm in TX INHIBIT?
I use it as a way of practicing my keying, which isn't up to much yet, but if
you've stopped the feedback, I can't do that any more.
Also, it means I can't check my monitor level before going into VOX!
To me this is a regrade
7 matches
Mail list logo