Thanks, Don. That's what I was guessing--but I wanted some "expert"
opinions before I started tinning leads and soldering.
-john W4PAH
On Thu, Sep 16, 2010 at 9:00 PM, Don Wilhelm wrote:
> John,
>
> The winding direction does not matter - just the turns ratio. So wind to so
> the green turns d
John,
The winding direction does not matter - just the turns ratio. So wind
to so the green turns do not cross over the red winding and it will be
neater and work just as well.
73,
Don W3FPR
On 9/16/2010 8:42 PM, John Shadle wrote:
> I'm nearing the end of my K2 build, and am working on the
I'm nearing the end of my K2 build, and am working on the KSB2 module
at the moment. On page 11 of the most recent version of the manual
(Rev E), it shows the secondary winding going "against the grain" of
the primary winding. I really want to start with wire 2 on the same
side of the toroid as wir
3 matches
Mail list logo
