... Joe, W4TV
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Julian, G4ILO
> Sent: Thursday, December 10, 2009 4:21 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] [K3] K3 software utili
It's a fair point you have raised, but I just did a few tests and it is
possible to select and change menu values while a program is polling during
normal operation. Clearly there is the potential for conflict - if you send
UP or DN commands hoping to change frequency it will change the menu
selec
a "shared" model.
73,
... Joe, W4TV
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Julian, G4ILO
> Sent: Thursday, December 10, 2009 12:53 PM
> To: elecraft@mailman.qth.net
&g
Joe Subich, W4TV-4 wrote:
>
> The most significant problem with multiple software access is the
> case of multiple command strings. It is nearly impossible to make
> multiple command strings work in a shared access environment due
> to the probability that a poll from one application will
I'm surprised no-one has mentioned VSPE (Virtual Serial Port Emulator)
http://www.eterlogic.com/Products.VSPE.html .
Unlike LP-Bridge it passes all commands through to the K3. You can do
firmware updates through it, though *not* while other radio applications are
running!
-
Julian, G4ILO. K2
One side noteI HAVE used the K3 Utility through LPB for the sole purpose of
executing macros. Though as Bill said you should NEVER try to do a FW update
through LPB.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Dec 10 7:14 , Bill W4ZV sent:
>
>
>
>Bill W4ZV
Bill W4ZV wrote:
> Note that LP-Bridge **does not** allow sharing the K3 with any other
> applications because of potentially corrupting firmware downloads (and
> that's a good thing!)
>
Oops...should have said "K3 Utility" instead of K3 above.
73, Bill
--
View this message in context:
ht
Mike-14 wrote:
>
> The problem on a Windows box is sharing the comm port with another
> application.
>
Which is why Barry suggested LP-Bridge, which allows multiple applications
to address the K3 simultaneously:
http://www.telepostinc.com/LPB.html
Regarding a separate IP address for the K3
8 matches
Mail list logo