Re: [Elecraft] [PX3] - symmetrical reflections about the center point

Thank you - that did it - The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. > On Jan 14, 2016, at 14:55, Eric Swartz - WA6HHQ, Elecraft > wrote: > > Hi Kevin, > > Try removing each end of the IQ cable between the

Re: [Elecraft] [PX3] - symmetrical reflections about the center point

Hi Kevin, Try removing each end of the IQ cable between the KX3 and PX3 and firmly re-inserting it. What you are seeing usually is the result of one end not being fully inserted in the jack, leaving one of the IQ lines open. Eric /elecraft.com/ On 1/10/2016 4:42 AM, kevino z wrote: Not sure

Re: [Elecraft] [PX3] - symmetrical reflections about the center point

Kevin, That is what happens if only one of the I/Q channels is connected. Make certain your I/Q cable is fully inserted - check both ends. 73, Don W3FPR On 1/10/2016 7:42 AM, kevino z wrote: Not sure if it was the loading of the new KX3 firmware, or if I changed some settings, but now on my

[Elecraft] [PX3] - symmetrical reflections about the center point

Not sure if it was the loading of the new KX3 firmware, or if I changed some settings, but now on my PX3 panadapter, I see everything symmetrically mirrored around the center. So for example, If there is a signal at Center frequency -50kHz, it appears at +50kHz too. As I move the VFO, the signal