Thank you - that did it
-
The problem with the world is that the intelligent people are full of doubts,
while the stupid ones are full of confidence.
> On Jan 14, 2016, at 14:55, Eric Swartz - WA6HHQ, Elecraft
> wrote:
>
> Hi Kevin,
>
> Try removing each end of the IQ cable between the
Hi Kevin,
Try removing each end of the IQ cable between the KX3 and PX3 and firmly
re-inserting it. What you are seeing usually is the result of one end not being
fully inserted in the jack, leaving one of the IQ lines open.
Eric
/elecraft.com/
On 1/10/2016 4:42 AM, kevino z wrote:
Not sure
Kevin,
That is what happens if only one of the I/Q channels is connected. Make
certain your I/Q cable is fully inserted - check both ends.
73,
Don W3FPR
On 1/10/2016 7:42 AM, kevino z wrote:
Not sure if it was the loading of the new KX3 firmware, or if I changed some
settings, but now on my
Not sure if it was the loading of the new KX3 firmware, or if I changed some
settings, but now on my PX3 panadapter, I see everything symmetrically mirrored
around the center. So for example, If there is a signal at Center frequency
-50kHz, it appears at +50kHz too. As I move the VFO, the signal
4 matches
Mail list logo