Thanks, Fred.
I switched DIGOUT1 on while on 6m and it remembers to be on, only on
6m. My application will be to control an external relay that will
enable INHIBIT for 6m-eme. As already mentioned, I use BAND0 for this
on 2m and higher transverter bands, but I do not want INHIBIT for
normal
To play one-up with Don (not really): I have recently re-drawn my
station block diagram to reflect the selling of my FT-847 and
addition of more transverters to the K3. Coax switching is manual,
except for the 1P6T XVT-Rx selection.
The FT-817 shown at the bottom could become a KX3?
-
From: dbellw...@aol.com
To: elecraft@mailman.qth.net
Cc: k...@aol.com
Sent: Wednesday, August 24, 2011 8:29 PM
Subject: [Elecraft] K3 Auto antenna switching
I have two 80 meter antennas. Is it possible to program the band data
output on the K3 for 80 meters # 1 and # 2? I couldn't
, 2011 8:29 PM
Subject: [Elecraft] K3 Auto antenna switching
I have two 80 meter antennas. Is it possible to program the band data
output on the K3 for 80 meters # 1 and # 2? I couldn't find an answer
to
this
in the manual.
73, Dave
...@mailman.qth.net] On Behalf Of Guy Olinger K2AV
Sent: Thursday, August 25, 2011 2:05 AM
To: Oliver Dröse
Cc: elecraft@mailman.qth.net; dbellw...@aol.com; k...@aol.com
Subject: Re: [Elecraft] K3 Auto antenna switching
I would really like an external signal that tells whether ANT1 or ANT2
I was looking at the ACC features and have a question about
DIGOUT1. Does this feature have any use without the KAT3? I wonder
if there is map for its output states by band (or how one does this -
it would be handy for me to use this for 6m-eme to enable INHIBIT
when on 6m). I currently use
...@mailman.qth.net [mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of Guy Olinger K2AV
Sent: Thursday, August 25, 2011 2:05 AM
To: Oliver Dröse
Cc: elecraft@mailman.qth.net; dbellw...@aol.com; k...@aol.com
Subject: Re: [Elecraft] K3 Auto antenna switching
I would really like an external
: elecraft@mailman.qth.net; dbellw...@aol.com; k...@aol.com
Subject: Re: [Elecraft] K3 Auto antenna switching
I would really like an external signal that tells whether ANT1 or ANT2
is
selected. Any way to do that? 73, Guy
On Wed, Aug 24, 2011 at 7:28 PM, Oliver Drösedro...@necg.de wrote
.**netelecraft-boun...@mailman.qth.net[mailto:
elecraft-
boun...@mailman.qth.net] On Behalf Of Guy Olinger K2AV
Sent: Thursday, August 25, 2011 2:05 AM
To: Oliver Dröse
Cc: elecraft@mailman.qth.net; dbellw...@aol.com; k...@aol.com
Subject: Re: [Elecraft] K3 Auto antenna switching
I would really like
Sent: Thursday, August 25, 2011 2:05 AM
To: Oliver Dröse
Cc: elecraft@mailman.qth.net;
dbellw...@aol.com; k...@aol.com
Subject: Re: [Elecraft] K3 Auto antenna
switching
: elecraft-boun...@mailman.qth.net [mailto:elecraft-
boun...@mailman.qth.net] On Behalf Of Edward R. Cole
Sent: Thursday, August 25, 2011 12:01 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3 Auto antenna switching
I was looking at the ACC features and have a question about
DIGOUT1. Does
Gotcha.
Is what goes on with DIGOUT0 firmwired in the firmware, or is that
available somehow with some sneaky procedure? TWO signals I could work, one
of them via software command to K3, would be simply splendiferous and get
rid of ugly relay logic board. But I know I'm reaching here...
73,
E.g. does something else when KIO3 is set to NOR, besides stay high.
On Thu, Aug 25, 2011 at 4:13 PM, Guy Olinger K2AV olin...@bellsouth.netwrote:
Gotcha.
Is what goes on with DIGOUT0 firmwired in the firmware, or is that
available somehow with some sneaky procedure? TWO signals I could
Guy,
Thanks for your questions - you are giving me ideas about how to
reconfigure and automate my antenna switching to take advantage of both
ANT1 and ANT2. Right now, I use only a single connector on the KAT3,
and have given up on automating the band selection for now, so I operate
manual
As far as I know the only use of DIGOUT 0 is to indicate low power
operation for a given transverter band:
With KIO3 set to TRN or HF-TRN, the DIGOUT0 line (ACC, pin 6) will
output 0 V when low power mode is selected for the current
transverter band (CONFIG:XVn PWR). At all other
I have two 80 meter antennas. Is it possible to program the band data
output on the K3 for 80 meters # 1 and # 2? I couldn't find an answer to this
in the manual.
73, Dave
__
Elecraft mailing list
Home:
Dave,
The band data (when decoded) will allow you to connect both of your 80
meter antennas to the K3 - one to ANT1 and the other to ANT2 (assuming
you have the KAT3 installed). Your external antenna switching relay
system (working from the band data decode) is responsible for connecting
the
Hi Dave,
unfortunately not, it's just one BCD code per band.
73, Olli - DH8BQA
- Original Message -
From: dbellw...@aol.com
To: elecraft@mailman.qth.net
Cc: k...@aol.com
Sent: Wednesday, August 24, 2011 8:29 PM
Subject: [Elecraft] K3 Auto antenna switching
I have two 80 meter
18 matches
Mail list logo
