Right click on the taskbar speaker icon then select sounds. Under Sounds
click on the recording tab. Double click on the USB Audio Codec (I renamed
mine and called it K3S). On the Properties window, click on the Levels tab.
I have mine set to "2" and my K3S line level is 4.
--
Jack WA9FVP-
I find Don's info to be exactly correct as it applies to the USB
connection between the radio and computer.As to the Line IN and Line
OUT on the back of the radioI've never used it.
With Windows 10, if you wish the Sound Card to show the levels in dB,
just right click on the level
Jim,
What are the settings for the K3S CODEC in the computer?
Look at your soundcard settings and set them to something lower. There
is normally no need for an additional control in the K3S other than the
normal LINE IN gain settings. The settings for the K3/K3S computer LINE
OUT (or SPKR) s
On 6/26/2017 10:00 PM, Guy Olinger K2AV wrote:
Audio from the K3S via USB is never actual audio in the K3S. After
the low IF hits the A/D converter, it's number soup everywhere
between the A/D and the far end of the USB cable.
Wrong! The stereo input of "USB Audio CODEC" is fed by the "Line
Gotta remember that there's no audio here, just numbers that represent
audio. Somewhere in the PC there is a setting that instructs a program to
set a reference level for the digital signal. It's not at all like running
coax from line out jacks. The digital doesn't pick up hum or flat-top. Just
num
Can't help but wonder, is anyone adjusting the recording and playback in
Windows?
Mine works fine by adjusting those. I don't do any vhf though.
73 Dwight NS9I
On 6/26/2017 7:59 PM, Jim Rogers wrote:
Richard - I second your report, there is no fine adjustment for the
USB audio on the K3s eit
Richard - I second your report, there is no fine adjustment for the USB
audio on the K3s either in received audio or transmitted audio. When the
band is noisy, I have to reduce LIN OUT to 01 or alternatively reduce
the overall system gain with the RF gain (which in the case of the K3
and K3s is
USB audio with the default settings has been fine for me from the first
day. Check your settings?
On Thu, Jun 22, 2017 at 10:31 AM, Dick via Elecraft <
elecraft@mailman.qth.net> wrote:
> Hello Elecraft,
>
> When feeding the audio from the K3S USB port to the CPU, the K3S audio
> level is extr
There is a Lin Out setting in menu.
Sent from my iPhone
...nr4c. bill
> On Jun 22, 2017, at 1:31 PM, Dick via Elecraft
> wrote:
>
> Hello Elecraft,
>
> When feeding the audio from the K3S USB port to the CPU, the K3S audio
> level is extremely high and way too hot for good performance on
See the CONFIG Menu, LIN OUT to adjust level. Normal is 010.
73
Bob, K4TAX
K3S S/N 10163
On 6/22/2017 12:31 PM, Dick via Elecraft wrote:
Hello Elecraft,
When feeding the audio from the K3S USB port to the CPU, the K3S audio
level is extremely high and way too hot for good performance o
Hello Elecraft,
When feeding the audio from the K3S USB port to the CPU, the K3S audio
level is extremely high and way too hot for good performance on many digital
modes.
Example, even with my CPU's sound card set at the lowest possible level of
"01" my K3S is hitting the JT-65 software
11 matches
Mail list logo