> I collapse it down to 33ft6in.
Why bother?
Insert an 8' piece of fiberglass tubing in the top ... now you have a
50' +/- support. Install two 8' pieces of PVC or fiberglass tubing in
a horizontal cross at 30 to 35'. On one, run your 80 meter wire - tie
it back to the tip of the antenna and
I personally love the idea of a 43 foot vertical. I use the Dx Engineering
Thunderbolt for 60 meters, it is 1.5 inches at the top. I collapse it down
to 33ft6in. Gives a fully resonant antenna on 40. Add a 17.5 foot wire with
outrigger (pvc supported on vert by hose clamp) and now you have 20meters
r the gain).
--
From: "Ron D'Eau Claire"
Sent: Tuesday, September 03, 2013 5:28 PM
To: "'Reflector Elecraft'"
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
An interesting point I noticed modeling a 43 foot vertical was that, whi
On 9/3/2013 9:16 PM, Don Wilhelm wrote:
I use paralleled dipoles here, and I have limited the number of bands
on a single feedline to 3 bands, so I have one for 20, 15, and 10
meters, and another for 30, 17, and 12. The wires are spaced about 1
foot apart with PVC spreaders.
I like fan dipo
I use paralleled dipoles here, and I have limited the number of bands on
a single feedline to 3 bands, so I have one for 20, 15, and 10 meters,
and another for 30, 17, and 12. The wires are spaced about 1 foot apart
with PVC spreaders.
Tuning them is a bit of a challenge, but if one tunes the
. Once up, it would have been impossible to re-deploy due
to tangles.
73, Charlie k3ICH
- Original Message - From: "Jim Brown"
To:
Sent: Tuesday, September 03, 2013 11:03 PM
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
On 9/3/2013 7:30 PM, Fred Jensen w
k3ICH
- Original Message -
From: "Jim Brown"
To:
Sent: Tuesday, September 03, 2013 11:03 PM
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
On 9/3/2013 7:30 PM, Fred Jensen wrote:
With the KPA500 at 500W, on 40m, I get a lot of RF from the GAP screwing
up th
On 9/3/2013 7:30 PM, Fred Jensen wrote:
With the KPA500 at 500W, on 40m, I get a lot of RF from the GAP
screwing up things like the WinKey, the laptop, and various other
digital gadgets.
The first thing I would do is put a serious ferrite choke on the coax at
the antenna. If that doesn't fi
On 9/3/2013 5:23 PM, Jim Brown wrote:
The practical problem with sticking a ground plane on your roof is that
it needs at least two radials per band, but there are several multiband
antennas for those bands configured as vertical dipoles that work well
without radials. That's the basis of my ear
This has been an excellent discussion on the 43 foot vertical. I have one
installed in my back yard (DX Engineering). Very happy with it overall. It's
been an excellent performer on 20 meters, and good on other bands; I'm a casual
DX-er, but have worked 5 continents SSB with the 12 watt output o
YES! You've hit the nail beautifully on the head, Ron. I just finished
preparing slides comparing a 43 ft ground-mounted vertical with a good
radial system on 20M, 15M, and 10M with a classic ground plane at 30 ft
and vertical dipole with a base at 30 ft for those bands.Looking at
performance
An interesting point I noticed modeling a 43 foot vertical was that, while
on 10 meters the main lobe is up around 50 degrees, the "gain" at low angles
is similar to a 1/4 wave "ground plane" antenna cut for 10 meters. That's
because the longer antenna has significant gain over a 1/4 wave antenna s
Thanks Mike. Your observations about radiation angle and performance
are in good agreement with my modeling. Yes, the secret sauce is that 43
ft is 5/8 on 20M.
73, Jim K9YC
On 9/3/2013 11:17 AM, mikefur...@att.net wrote:
Hi Jim,
I use exactly that here in Tampa. My antenna is a stealth 43'
.
Hope this helps.
73, Mike WA5POK/4 Tampa
--
From: "Jim Brown"
Sent: Monday, September 02, 2013 7:10 PM
To: "Reflector Elecraft"
Subject: [Elecraft] 43 Ft Vertical and Elecraft Tuners
43 ft verticals have become a popular antenna, and while th
On 9/2/2013 11:18 PM, Matt Moller wrote:
I don't have any experience with 43 ft verticals myself but have heard
a lot about them and have been thinking about building one. I too
would like to learn more.
The reason for my post asking for experience with this antenna and the
Elecraft tuner is
On 09/03/2013 06:29 AM, Phil & Debbie Salas wrote:
> I also have some info in the “Presentations” section of my website at
> www.ad5x.com.
Phil's "The 43-Foot Vertical" presentation is very well written and
contains a wealth of good information.
Phil references a 10 Ohm ground. Using the informa
Dave WX7G wrote an article that may be of interest:
www.eham.net/articles/21272
I also have some info in the “Presentations” section of my website at
www.ad5x.com.
As Jim says, if you use good quality coax over reasonable distances (I use 1/2”
heliax over a 60-ft run), SWR-related losses are r
most people I have heard running a 23 or 32 ot 43 foot vertical all use
a 4:1 and a 1:1 inline...
I hvae also been reading articals where a 5.1 rf coil is used.
--
R.Neese
KB3VGW
__
Elecraft mailing list
Home: http://mailman.qth.net/m
Definitely a loaded question. No pun intended. I don't have any
experience with 43 ft verticals myself but have heard a lot about them
and have been thinking about building one. I too would like to learn more.
Matt Moller
KG6KSL
K3 #3496
On 9/2/2013 4:10 PM, Jim Brown wrote:
43 ft verticals ha
Don't worry about remoteing the tuner, but ditch the RG8X and use RG8 with
the least loss you can find.
George,W6GF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Po
o:elecraft-boun...@mailman.qth.net] On Behalf Of Ron D'Eau Claire
Sent: Monday, September 02, 2013 7:04 PM
To: 'Barry LaZar'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
Barry, Number 1 is true if, and only if, the antenna is used below 14 MHz.
enna
efficiency.
73, Ron AC7AC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Barry LaZar
Sent: Monday, September 02, 2013 4:32 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 43 Ft Vertical and Elecraft Tuners
I
tests.
73
George Osier , N2JNZ
-Original Message- From: Jim Brown
Sent: Monday, September 02, 2013 7:10 PM
To: Reflector Elecraft
Subject: [Elecraft] 43 Ft Vertical and Elecraft Tuners
43 ft verticals have become a popular antenna, and while they have some
strong points, they pres
great success
along with many stateside contests.
73
George Osier , N2JNZ
-Original Message-
From: Jim Brown
Sent: Monday, September 02, 2013 7:10 PM
To: Reflector Elecraft
Subject: [Elecraft] 43 Ft Vertical and Elecraft Tuners
43 ft verticals have become a popular antenna, and
One can feed the 43 foot vertical with ladder line, and do the tuning in
the shack (yes, you can feed a vertical with balanced line), but if
feeding with coax, the best place for the matching network is at the
base of the antenna. Coax is good for an swr of 2.0 or less (depending
on the freque
I know this isn't an answer to the basic premise of the raised question,
but let me throw this out.
1. 43 ft. verticals that are ground mounted require a large, good ground
system.
2. Depending on the band you are operating, the assumption of a high
VSWR is correct.
3. High VSWRs on coax are
Good question... I would like to know too.
A wise man once said nothing
On Sep 2, 2013, at 5:10 PM, Jim Brown wrote:
> 43 ft verticals have become a popular antenna, and while they have some
> strong points, they present a very high SWR on most bands, so they require a
> serious tuner to
43 ft verticals have become a popular antenna, and while they have some
strong points, they present a very high SWR on most bands, so they
require a serious tuner to get them to load.
I'd like to know of any stations using a 43 Ft vertical as a multi-band
antenna using nothing but an Elecraft
I find this discussion pretty enlightening as I too plan to use my 50 ft.
fiberglass mast to support a vertical as well as my G5RV. (Well, not really
a G5RV as the ladder line will run all the way to the shack.)
Sadly, I feel the dreaded "End of Thread" message coming though. As always,
take care
"It is an antenna and a good one, but it is not half of a dipole, it is
a whole dipole. It does not matter where a dipole is fed, it is still
a half wave long."
I beg to differ. A dipole is an antenna with two elements fed at the same
location. A half wave end fed is only one element that
Well if you double the frequency, then add a quarter wavelength of
ladder line, you have the original Zepp antenna, or the modern
equivalent, a J-pole.
73,
Don W3FPR
Mark, KJ7BS wrote:
> "The proof of this - you would never dream of putting up half of
> a dipole. Hi Hi"
>
>
>
_
On Mon, 7 Jun 2010 11:51:41 -0700, Rick Dettinger
wrote:
What you are describing is a half wave end fed wire which has the
other side of the circuit attached to ground.
For an antenna to be a dipole it must be two individual wires each fed
independently by a balanced or unbalanced feed line.
On Mon, 07 Jun 2010 13:13:25 -0500, David Little
wrote:
>The other half of this vertical antenna is the ground system. Without
>that other half, you will be wasting your time and money on the first
>half. The proof of this - you would never dream of putting up half of
>a dipole. Hi Hi
>73,
It is an antenna and a good one, but it is not half of a dipole, it is
a whole dipole. It does not matter where a dipole is fed, it is still
a half wave long.
73,
Rick Detinger K7MW
On Jun 7, 2010, at 11:27 AM, Mark, KJ7BS wrote:
> "The proof of this - you would never dream of putting u
SteppIR.
Willis 'Cookie' Cooke
K5EWJ
From: "Mark, KJ7BS"
To: "plama...@verizon.net" ; David Little
; Elecraft
Sent: Mon, June 7, 2010 1:27:36 PM
Subject: Re: [Elecraft] 43 ft Vertical
"The proof of this - you would ne
"The proof of this - you would never dream of putting up half of
a dipole. Hi Hi"
Sure. It's called an End Fed Half Wave dipole. Oh, but to some, that's not an
antenna.
--
Mark, KJ7BS
Glendale, AZ
Editor, The SKCC Centurion
Elecraft K2 S/N 0539
Fists # 2972 CC 1806
SKCC # 2240 C56 T20
MQFD #
The other half of this vertical antenna is the ground system. Without
that other half, you will be wasting your time and money on the first
half. The proof of this - you would never dream of putting up half of
a dipole. Hi Hi
73, Dave Little, AF5U
_
Little
Sent: Sunday, June 06, 2010 2:13 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] 43 ft Vertical & Balun
Those of you who a thinking about a 43 ft vertical or how to feed it might
read the links I have provided you here.
I have built a 43 ft vertical from a 50 ft telescoping Rohn pus
Those of you who a thinking about a 43 ft vertical or how to feed it might
read the links I have provided you here.
I have built a 43 ft vertical from a 50 ft telescoping Rohn push-up pole. I
am using a mesh ground system under it
thanks to Home Depot's 4ft x 7 ft mesh sheets linked together, ra
39 matches
Mail list logo