Al,
You will have to remove the ATU. Install the jumper in band board J8
between pins 1 and 8.
If your K1 does not have a "K1/ATU" switch next to the BNC jack, you
will have to re-install R36 on the bottom of the board - it should have
been left with one leg still soldered.
The lack of
I want to realign the output of my K1, the radio has an internal antenna
tuner. The reason is because I check the radio is not coming out with the
proper power (test performed with dummy load and PWR-SWR meter Daiwa). "OUT"
is at 2.0W, and I can see, on the power meter, 1W.
I proceeded by removing
2 matches
Mail list logo