K2 S/N 5953 came to life at 1402 UTC 15 Feb 2007 with 40 meter 8 watt SSB
contacts with New Hartford, NY, Centerville, IN, and Fort Wayne, IN.
Received good signal reports from all around and even better comments once
all found out I was QRP and using an Elecraft K2. This kit was a smooth
build an
Very pleased to report
that third smoke test went
fb.
K2 sn 5150 is alive.
73 de Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http:
Fellow Elecrafters:
I got the K2 on the air today. What a wonderful rig!
73,
Steve Kercel
AA4AK
K2 S/N# 5383
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, su
Hey Everybody.
It's Alive! It's Alive!! Time for the Happy Dance.
It is official ... K2 #3375 is Now Alive and Well.
Finished the building on 25 January (my birthday ... what a present) and
plugged it in this afternoon. Called a few CQ's, and made sure I could hear
myself on the KX1 across th
Congratulations: I'm hoping to have #5956 up and on the air (listening
only until the 23 ) on Saturday or Sunday. I'm close to finishing up the
second stage of construction on the RF Board; wound the toroids last
night but didn't install them yet.
Matthew D. Pitts
N8OHU
K2 #5956
Charles Pitts
Hi Greg. I think in Yahoo Digest 3503 you posed your question. Be sure to
follow up there with your results. I am posting this to the Elecraft
Reflector. I am certain that the other person on the Yahoo reflector having
this issue will be happy to know what you/we did.-not to mention
Elecraft(but
It came alive with no great problems earlier this week. I've been playing
around the last couple of days and haven't found anything to worry about
yet. The RX is really good.
I had a lot of fun building it, the biggest problem was switching back and
forth between reading glasses, magnifying gogg
Hi All!
IT'S ALIVE!!! K2 #7164 is finally up and running as of last night! The SMT
diode on the bottom of the board wasn't properly connected to the daughter
board. There was a pad, but it wasn't connected to the actual component. A
couple hairs of wire fixed everything! Happy Day!!
I als
KPA500 kit S/N 115 is up and running! I ordered early on the 1st day and it
arrived this Monday afternoon. I took my time and had fun putting it
together. I got to bed at exactly 1 AM. Everything checks out OK, even the
interface with WriteLog using Interface ll (serial 001.) The optional cable
pro
Hello David,
Great news on your K2. I just finished mine a couple of months ago with a
couple of minor problems which I needed help getting fixed. I just got it
back earlier this month and have been having a lot of fun with this great
little rig. I was tuning around 10 meters and heard a statio
10 matches
Mail list logo