With such an out of balance antenna, the case, power supply and leads of
the transmitter are all going to be parts of the real antenna. I'm not
sure, therefore, that you can rely on an SWR measurement made using
other equipment.
You should certainly make sure that paint is removed from
Hi Ted,
It sounds like all you would need is a simple configuration for your K2.
A couple of things you may want to consider is the KNB2 noise blanker if
you happen to have any impulse noise issues at your QTH. Also, the KAF2
audio filter provides a set of nice audio filters that can be
Good morning. I'd like to buy & make a K2 kit but would appreciate advice on
what features to buy. I'm a simple chap based in the UK. And after 50 years I
now Only use CW on 40m with a straight key, and I don't bother with contests
as the morse is all autokeyers, keyboards, decoders, &
Huge thanks to the many who have offered advice on the subject of my K2
intentions- all very useful and am just printing out the hard copies of all
the e-mails so I can reread and think about it (always did prefer hard
copy!!)
I really appreciate all the responses so many thanks; you have
John...
As per another post, I don't know if they're still available, either.
That said, I used them and found them to be a non issue and most
helpful in the long run. I am forever tinkering around inside my K2, and
having the ReWorkEliminators in there makes a huge difference. Hope you
can
Hello Group,
Having gained some confidence completing a K1 a few months ago, I've just
ordered from Elecraft a K2 with these options: KPA100, KSB2 and KDSP2. I
can't see that I'll ever want to install the KNB2 or the 160 or 60m options.
Does the Rework Eliminator approach to the build
I don't think these are available anymore except for the mic
adapter Bet that helps you make your decision...
;)
On Fri, Aug 13, 2010 at 10:07 PM, VK7JB zen...@netspace.net.au wrote:
Hello Group,
Having gained some confidence completing a K1 a few months ago, I've just
ordered from
7 matches
Mail list logo
