;>> NORM
>>>
>>> TX ON/OFF
>>>
>>> ALT1
>>>
>>> TX ON/OFF
>>>
>>> Receive may be dead at this point
>>>
>>>
>>> If not continue with
>>>
>>> Select USB
>>>
>>>
t;>
>> I do (from my point of view) hope that I am not the only one
with
>>
>> this funny..
>>
>>
>> 73
>>
>> Stewart G3RXQ
>>
>>
>> On Sun, 9 Mar 2008 12:30:15 -0700, AB7R wrote:
>>
>>> Stewart,
>>>
>&
calibration. It's been rock-solid ever
> since.
>
> Bruce, NM5B
> Santa Fe, NM
>
> - Original Message -
> From: "Stewart Baker" <[EMAIL PROTECTED]>
> To: "AB7R" <[EMAIL PROTECTED]>; "Elecraft Reflector"
>
>your report
>> and the radio performs as expected...no problem with RX after a
>transmit
>> with ALT1 set to 0.15 on the LO side.
>>
>> 73
>> Greg
>> AB7R
>>
>>
>> -Original Message-
>> From: [EMAIL PROTECTED]
>>
ROTECTED] Behalf Of Stewart
Baker
> Sent: Sunday, March 09, 2008 11:32 AM
> To: Elecraft Reflector
> Subject: [Elecraft] K3 - RX Problem after latest firmware update
>
>
> I am not sure if there is an obscure problem after the latest
MCU
> and DSP update. Maybe others could chec
Original Message
Subject:Re: [Elecraft] K3 - RX Problem after latest firmware update
Date: Mon, 10 Mar 2008 08:58:47 -0400
From: Ken K3IU <[EMAIL PROTECTED]>
To: Stewart Baker <[EMAIL PROTECTED]>
CC: AB7R <[EMAIL PROTECTED]>, Elecraft Refle
2008 11:32 AM
> To: Elecraft Reflector
> Subject: [Elecraft] K3 - RX Problem after latest firmware update
>
>
> I am not sure if there is an obscure problem after the latest
MCU
> and DSP update. Maybe others could check and see if it happens
to
> them ?
>
> Any band on SSB
Of Stewart Baker
Sent: Sunday, March 09, 2008 11:32 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 - RX Problem after latest firmware update
I am not sure if there is an obscure problem after the latest MCU
and DSP update. Maybe others could check and see if it happens to
them ?
Any band on SSB
I am not sure if there is an obscure problem after the latest MCU
and DSP update. Maybe others could check and see if it happens to
them ?
Any band on SSB if I have the DSP set to ALT1 with the Low Cut set
at 0.15 Hz , then after going onto transmit the receiver appears
to be dead. If I set the DS
9 matches
Mail list logo
