Hello,
Just update mine s/n #6552 and for my surprise he lost power on the upper
bands (18-28mhz). Instead of 100 watts he has 55 watts, more or less.
I revert the previous version ( 4.67) and the power back again.
Does anyone have the same issue ??
73
Rodrigo
ct1bxt
--
A utilizar o cli
I could not reproduce this problem.
I have the latest firmware (including beta releases) on all of my K-Line
(K3, P3, KPA500, and KAT500).
73, Tony K4QE
On Tue, Feb 4, 2014 at 10:39 PM, Steve AI9T wrote:
> Anyone have any problems with the new Firmware. I installed the firmware
> updates on t
Anyone have any problems with the new Firmware. I installed the firmware
updates on the K3, KPA500, and KAT500 tuner. I had problems with the K3
after the update. There was some kind of problem with the power output.
For starters I could not adjust the power out while the rig was keyed.
For ins
That's strange, I updated mine this pm and I had all the required info!
Ken.. G0ORH
Sent from my iPad
> On 4 Feb 2014, at 15:30, Paul Kirley wrote:
>
> The 4.81 firmware release notes as downloaded from the FTP site show
> only the following for version 4.81:
> * XVTR IF BAND CAN NOW BE 10 OR
Paul,
The release notes are cumulative. If it was included in an earlier
firmware (whether beta or production), then it is also included in the
higher numbered version - unless it is specifically retracted.
The only exception would be a beta version that does not reach
production status (and
Oops, I now see that the necessary information is listed in the release
notes, but under an earlier beta that I seem not to have.
Sorry.
73, Paul W8TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
The 4.81 firmware release notes as downloaded from the FTP site show
only the following for version 4.81:
* XVTR IF BAND CAN NOW BE 10 OR 18 MHZ (in addition to the original
selections).
Expansion of the release notes at least to list the steps to set the CW
XFIL LO would be appreciated.
73, Paul
7 matches
Mail list logo