I have a K3. Did not have the problem in 5.33. Do not have the problem in
5.38. I am unable to duplicate your problem. In Data A, and b SEt width
control varies width in sub RX while main RX stays the same.
Your report sounds like you are in diversity mode. My frequency shows as
1.814.9 The right
Hi Elliott,
Here's a long-shot. Take a look at your filter selection for your SUB RX
using the K3 Utility program. Maybe you only have one filter enabled for
DATA mode.
73,
Mike K2MK
Elliott Lawrence-5 wrote
> Changing to MCU 5.38 did not solve the problem. Need to contact K3
> support!
> 73
>
Changing to MCU 5.38 did not solve the problem. Need to contact K3 support!
73
Elliott WA6TLA
On Oct 23, 2015, at 10:57 AM, Elliott Lawrence wrote:
> Using the latest K3 firmware MCU 5.35 for my K3 (not K3S). In the Data mode
> only, setting the bandwidth of the main receiver also causes the s
Hi Elliott,
I tested MCU 5.33 and could not duplicate your problem. I noticed that the
latest production release firmware is 5.38. I loaded 5.38 and again tested
and still could not duplicate your problem. So maybe the problem was only
present with MCU 5.35.
Another possibility is that you accide
Using the latest K3 firmware MCU 5.35 for my K3 (not K3S). In the Data mode
only, setting the bandwidth of the main receiver also causes the subreceiver
bandwidth to track and be identical. The BSET control XFIL for Data has no
effect. In CW and SSB modes the main receiver XFIL can be adjusted
5 matches
Mail list logo
