Sent: Tuesday, July 01, 2014 11:58 AM
Subject: [Elecraft] K3 Front Panel Problem
Hi
I have an issue with my K3. I keep the antennas physically disconnected here
and the radio had not been turned on for a week or so. Turned it on last
night and it initially worked fine. Made a few Qs o
mothy St. J.
Sent: Tuesday, July 01, 2014 9:59 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Front Panel Problem
Hi
I have an issue with my K3. I keep the antennas physically disconnected here
and the radio had not been turned on for a week or so. Turned it on last
night and it init
Hi
I have an issue with my K3. I keep the antennas physically disconnected here
and the radio had not been turned on for a week or so. Turned it on last night
and it initially worked fine. Made a few Qs on 6m.
I then noticed that I could not switch the VFOs back and forth using the A/B
but
Cc: "Elecraft Reflector"
Sent: Saturday, August 03, 2013 7:36 PM
Subject: Re: [Elecraft] K3 Front Panel Problem
Thanks Dave,
I tried rotating the four knobs and tapping them. Found out rotating the
knobs works as expected, but the tap and hold functions do not work at all.
None of
owns
> Sent: Saturday, August 03, 2013 4:24 PM
> To: elecraft@mailman.qth.net Reflector
> Subject: [Elecraft] K3 Front Panel Problem
>
> Elecraft List,
>
> I haven't used my K3 for quite a while as I have been playing
> with the KX3 (the K3 has been sitting on the desk tot
Lake, CA
-Original Message-
From: Michael Downs
Sent: Saturday, August 03, 2013 4:24 PM
To: elecraft@mailman.qth.net Reflector
Subject: [Elecraft] K3 Front Panel Problem
Elecraft List,
I haven't used my K3 for quite a while as I have been playing
with the KX3 (the K3 has been si
Elecraft List,
I haven't used my K3 for quite a while as I have been playing with the KX3 (the
K3 has been sitting on the desk totally disconnected from everything). Now when
I fire up the K3, none of the front panel buttons and dual-purpose controls
work, except volume and VFO A. I thought may
Having successfully installed the KRX3 I have a small problem on the
front panel which I think is due to either a poor ground connection or a
connector not fully mated.
On power all display segments show, which I can't remember seeing
before. Initially I could then see a lot of segments which
8 matches
Mail list logo
