Many thanks to all of those who took the time and trouble to answer.
I took the SignaLink apart and re-seated the module. I also re-checked my ALC
setting and all the others on the rig.
I had come across a very useful document by Jason K8ZT and followed his
instructions to the letter. I
You have the Signalink w/the module or the one w/jumpers? Several of my friends
have had trouble w/the Signalink w/the module, I have two Signalinks, both
w/jumpers and don’t have any issues.
73 de Jose Douglas KB1TCD
Sent from my iPad
> On Apr 4, 2020, at 4:21 AM, David Bondy wrote:
>
> I
David,
I think you should check the jumpers in the SignaLink. Also make
certain the level controls for the SL soundcard are set correctly in the
computer.
Or simply use another USB soundcard - the K33 has built-in isolation
transformers.
Set the K3 LIN OUT level to about 10.
You
I ask “why use a SignaLink with the K3?”
The K3 already has buffered Lin In and Line Out. Separate settings for in/out
for each mode.
The one item to pay attention to is transmit audio level. You should set the
power out by using the Per knob on the K3 front panel.
Then adjust the audio to
I have been using digital modes for years and have a number of SignaLink USB
devices which have all worked very well with a variety of rigs.
I am new to the K3 and have bought the Tigertronics cable and module set to
allow me to connect a SignaLink USB to the rear Line In/Out and PTT
5 matches
Mail list logo