Sub RX stopped working on 20/17 meters
Hi
This is my first help idea. Perhaps your sub receiver is not connected to
an active antenna on 17 and 20 meters.
I have done stuff like that and pulled my hair out until I realized the above
net> On
Behalf Of Chris Hallinan
Sent: Monday, March 12, 2018 6:58 PM
To: <elecraft@mailman.qth.net> <Elecraft@mailman.qth.net>
Subject: [Elecraft] K3 Sub RX stopped working on 20/17 meters
Hi Folks,
Just learning my way around the KRX3A. For reasons I can't determine, it
sto
Chris,
Which filters are enabled for what modes? You can check with K3 Utility.
It would simplify things a bit if you moved the SUB RX filter by one
slot (leaving FL1 empty).
Then change the filter configuration to match using either K3 Utility or
by hand in the menu.
The thing that is
Thanks Don,
According to the K3 Utility, all four filters are enabled for Sub RX for
CW, USB and LSB modes.
However, I still can only receive on FL2/3. When FL1 or 4 are selected,
the Sub RX S-Meter goes to zero and there is no receive on any mode.
By now I am quite familiar with the BSET button
Hmmm.
Just made a new discovery.
I can get the Sub RX to work on FL2 and FL3, but not FL1 nor FL4.
Here is my filter configuration:
FILTER Main RX SUB RX
FL1 13KHz2.7KHz
FL2 2.7 1.8
FL3 1.8 500Hz
FL4 500Hz250
FL5 250Hz
First of, shouldn't
Well, I have a 20-meter vertical connected directly to the AUX RF input,
and a receiving loop connected to RX IN. So unless there is a setting
somewhere that somehow disconnects the antennas on 20 and 17, it's simply
not working.
Noone else has replied. I have placed a call to Elecraft support
Hi
This is my first help idea. Perhaps your sub receiver is not connected
to an active antenna on 17 and 20 meters.
I have done stuff like that and pulled my hair out until I realized the
above.
luck
__
Elecraft mailing list
Home:
Hi Folks,
Just learning my way around the KRX3A. For reasons I can't determine, it
stopped working on 20 and 17 meters. Works fine on the other bands. I
have tried with both main and AUX antennas. I know it worked when first
installed. B_SET settings all seem normal, mode, bw, atten, etc. I
8 matches
Mail list logo