[Elecraft] K3 and Icom PW-1

2012-03-22 Thread Mike Gee
Has anyone been successful in interfacing the K3 with the Icom PW-1 amplifier to allow for auto band switching of the amplifier? 73 Mike W9QO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] K3 and Icom PW-1

2012-03-22 Thread Joe Subich, W4TV
microHAM microKEYER II, DigiKeyer II and/or Station Master provide isolated/regenerated CI-V control and PA PTT capable of controlling a PW-1 with a K3. DXLab Suite provides a software solution (the Secondary CAT Serial Port in CI-V Commander) to controlling the PW-1. I know of no other

Re: [Elecraft] K3 and Icom PW-1

2012-03-22 Thread Val
Oh, there are a lot of them - the native CT17, Rigexperts, Rigblasters etc... 73, Val LZ1VB I know of no other products currently on the market capable of translating serial controls in one format to the CI-V transceive necessary to control the PW-1. ... Joe, W4TV On 3/22/2012

Re: [Elecraft] K3 and Icom PW-1

2012-03-22 Thread Joe Subich, W4TV
Oh, there are a lot of them - the native CT17, Rigexperts, Rigblasters etc... None of the above will translate Elecraft CAT commands to Icom CI-V transceive protocol broadcasts to allow the PW-1 to track or change bands with the K3. Without the proper data, the PW-1 doesn't operate as an

Re: [Elecraft] K3 and Icom PW-1

2012-03-22 Thread David F. Reed
As Joe mentions, my personal experience using the Station Master is very good; it is a well supported and fully functional solution that also provides antenna switching and rotor control among other capabilities, and I just recently started using it remotely. 73 de Dave, W5SV On 3/22/12 2:33

[Elecraft] K3 and ICOM PW-1

2008-11-16 Thread Bob DeHaney
Check the circuit diagram. If they are using the same concept as in my ICOM IC-2KL, then the amp has absolutely no protection without ALC. Vy 73, Bob DJ0MBC/WU5T ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber

RE: [Elecraft] K3 and Icom PW-1

2008-06-03 Thread Dick Dievendorff
to me that it's a CI-V path, not a band voltage. Dick, K6KR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Subich, W4TV Sent: Monday, June 02, 2008 1:33 PM To: 'Jerry Flanders'; elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 and Icom PW-1

RE: [Elecraft] K3 and Icom PW-1

2008-06-03 Thread Joe Subich, W4TV
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dick Dievendorff Sent: Tuesday, June 03, 2008 8:05 AM To: [EMAIL PROTECTED]; 'Jerry Flanders'; elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 and Icom PW-1 As I think about this I'm not sure

[Elecraft] K3 and Icom PW-1

2008-06-02 Thread Bob Serwy
Any one has a K3 and a PW-1 hooked up for automatic band switching of the PW-1? If so, how as it accomplished? Thanks Bob Serwy - N9RS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber

RE: [Elecraft] K3 and Icom PW-1

2008-06-02 Thread Joe Subich, W4TV
PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Serwy Sent: Monday, June 02, 2008 11:24 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 and Icom PW-1 Any one has a K3 and a PW-1 hooked up for automatic band switching of the PW-1? If so, how as it accomplished? Thanks

RE: [Elecraft] K3 and Icom PW-1

2008-06-02 Thread Jerry Flanders
can get the image file restored. 73 de Dick, K6KR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Subich, W4TV Sent: Monday, June 02, 2008 9:30 AM To: 'Bob Serwy'; elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 and Icom PW-1 Bob, There are two

RE: [Elecraft] K3 and Icom PW-1

2008-06-02 Thread Dick Dievendorff
Subich, W4TV Sent: Monday, June 02, 2008 9:30 AM To: 'Bob Serwy'; elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 and Icom PW-1 Bob, There are two approaches that will work to do automatic band switching with the K3 and PW-1. The first is to use something like the microHAM Band Decoder

RE: [Elecraft] K3 and Icom PW-1

2008-06-02 Thread Dick Dievendorff
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Flanders Sent: Monday, June 02, 2008 10:48 AM To: elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 and Icom PW-1 IIRC, this method only works for the major bands. ICOM did not provide for the others. Jerry

RE: [Elecraft] K3 and Icom PW-1

2008-06-02 Thread Joe Subich, W4TV
: [Elecraft] K3 and Icom PW-1 IIRC, this method only works for the major bands. ICOM did not provide for the others. Jerry W4UK At 01:42 PM 6/2/2008, Dick Dievendorff wrote: See also Top Ten Devices application note #3, http://www.qth.com/topten/apnote3.htm Unfortunately the schematic

RE: [Elecraft] K3 and Icom PW-1

2008-06-02 Thread Joe Subich, W4TV
- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Subich, W4TV Sent: Monday, June 02, 2008 4:33 PM To: 'Jerry Flanders'; elecraft@mailman.qth.net Subject: RE: [Elecraft] K3 and Icom PW-1 IIRC, this method only works for the major bands. ICOM did not provide