Your original problem (VOX=OFF and beep) could have been caused by
key-down at power-up.
Check and/or disconnect your keying lines. The K3 may then start OK.
If you key via the RS-232 port, you may have a computer or cable problem.
But you can't be sure until the K3 is unkeyed.
73, Paul W8TM
Hello Elecrafters
After a 10 days trip i turned on my K3 and it was blocked. No buttons
working, no rx, nothing. Only the displays were working, on the lcd the msg:
VOX=OFF and a continuous beep.
So after a few turn on/off i decided go to EEINT (reset the radio).
Well after that i opened the K3
2 matches
Mail list logo