I think that Wayne has mentioned the differences in an earlier post. The first
four NR settings F1-x to F4-x are for CW ONLY, F5-x and higher are for SSB. The
different NR settings are not called out as well as they might have been in the
manual. I, too first tried F1-1 through F4-7 for SSB
il
Subject: Re: [Elecraft] [Elecraft K3] Volume Level with NR
Hi Gary et al,
My K3 is quite new to me so I don't have a lot of comment yet on DSP. But I
do own a Clear Speech PCB and more recently the BHI board from the U.K. I
must say both are fabulous and I routinely use them for weak
WOW what a great read
thanks for the pointers
Bob K3DJC
Jack Smith who characterized the K3 AGC and posted charts
> on
> his website www.cliftonlaboratories.com, I set my AGC SLP to 002 and
> AGC
> THR to 008 and I am a happy camper. It reduces the band noise rise
>
> between signals and
Bob,
While Wayne has said that the default settings were well thought out and
will serve most operators well, I liked the AGC response of my K2 which
made strong signals have stronger audio than weaker signals.
Thanks to Jack Smith who characterized the K3 AGC and posted charts on
his website
is, we all experience different band conditions
> and
> >>> what works
> >>> for one person may not work for all of us.
> >>>
> >>> My 2 cents worth...keep the change
> >>>
> >>> 73's
> >>> Gary
&
Behalf Of WILLIS COOKE
Sent: Monday, October 04, 2010 6:15 PM
To: W4GRJ; Dale Wiese; Elecraft Email
Subject: Re: [Elecraft] [Elecraft K3] Volume Level with NR
That sure is not what I have observed. My signals drop about 2 S units if
they
are strong. If they are near the noise level they disappear
Sent: Monday, October 04, 2010 6:15 PM
To: W4GRJ; Dale Wiese; Elecraft Email
Subject: Re: [Elecraft] [Elecraft K3] Volume Level with NR
That sure is not what I have observed. My signals drop about 2 S units if
they
are strong. If they are near the noise level they disappear. I am running
F
1-1
the change
>>>
>>> 73's
>>> Gary
>>>
>>>
>>>
>>> On Tue, Oct 5, 2010 at 8:15 AM, WILLIS COOKE
>>> wrote:
>>>
>>>> That sure is not what I have observed. My signals drop about 2 S
>>>> units if
>>>> they
>>>&g
y signals drop about 2 S
>>> units if
>>> they
>>> are strong. If they are near the noise level they disappear. I
>>> am running
>>> F
>>> 1-1. It is worse if I run a higher NR level.
>>>
>>> Willis 'Cookie' Cooke
>
Hi Gary et al,
My K3 is quite new to me so I don't have a lot of comment yet on DSP. But I
do own a Clear Speech PCB and more recently the BHI board from the U.K. I
must say both are fabulous and I routinely use them for weak signal EME and
just general HF. I tend to think the BHI board is a t
are strong. If they are near the noise level they disappear. I am running
>> F
>> 1-1. It is worse if I run a higher NR level.
>>
>> Willis 'Cookie' Cooke
>> K5EWJ
>>
>>
>>
>>
>> ________
>> From:
man.qth.net>
> Sent: Mon, October 4, 2010 4:54:21 PM
> Subject: Re: [Elecraft] [Elecraft K3] Volume Level with NR
>
> Dale,
>
> Just for reference, my experience with the K3 NR is outstanding. I cannot
> notice any reduced volume on the tuned signal. The NR on my K3 does a gre
To: Dale Wiese ; Elecraft Email
Sent: Mon, October 4, 2010 4:54:21 PM
Subject: Re: [Elecraft] [Elecraft K3] Volume Level with NR
Dale,
Just for reference, my experience with the K3 NR is outstanding. I cannot
notice any reduced volume on the tuned signal. The NR on my K3 does a great
job of wh
I second that. I ran it though all the NR selections and it performed
admirably for me. I could not duplicate the problem here.
73s Jim, W4ATK
On Oct 4, 2010, at 4:54 PM, W4GRJ wrote:
> Dale,
>
> Just for reference, my experience with the K3 NR is outstanding. I
> cannot
> notice any reduced
Dale,
Just for reference, my experience with the K3 NR is outstanding. I cannot
notice any reduced volume on the tuned signal. The NR on my K3 does a great
job of whacking out the noise without effecting the signal level.
You may need to do some checking of settings and calibration, I am sure
th
15 matches
Mail list logo
