Looks like Don beat me to the punch. (I'm reading to slow today ;-)
Thanks Don!
73,
Eric
elecraft.com
_..._
> On Feb 17, 2019, at 4:19 PM, paule408--- via Elecraft
> wrote:
>
> Don, thanks so much for your swift reply and great suggestion.
> I re-seated the grey control cable and snugged
Hi Paul,
If the green AC light is on and the PS 50V LED is not coming on when you try
to power up the amp from the RF deck front panel it indicates that the two
boxes are not talking.
It sounds like the control cable between the amp and PS is not fully seated.
Try unscrewing it on both ends
Don, thanks so much for your swift reply and great suggestion.
I re-seated the grey control cable and snugged it up and the amp is working
fine now!
Problem solved! (Cockpit error)
Thanks all,
Paul N6PSE
On Sunday, February 17, 2019, 3:53:59 PM PST, Don Wilhelm
wrote:
Paul,
Be cert
Paul,
Be certain the control cable between the KPA1500 RF deck and the power
supply is seated properly and the jackscrews tightened. The fact that
the KPA1500 power switch does nothing is an indicator that the cable may
have some problem.
73,
Don W3FPR
On 2/17/2019 6:41 PM, paule408--- via
Last August, I had my KPA1500 repaired by Elecraft as one PA transistor failed.
They replaced both PA transistors and sent it back to me under warranty. Only
the RF deck was shipped to Elecraft. The KPA1500 power supply stayed home
unplugged during this time,.
I kept using my backup Amp until t
5 matches
Mail list logo